|
| 1 | Demolition of reinforced cement concrete of any description for Chajja , railing, ladder , facia , manhole cover, colums , self slab of type, other places etc complete all as specified and directed. |
| 2 | M&L for precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs, coping, slabs, chullah hoods,chajjas,water troughs,shelves and similar articles with plain faces complete all as specified and as directed . |
| 3 | M&L TMT steel bars of 8-10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed. |
| 4 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified and as directed. |
| 5 | M&L PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate, as in sub base of floor incld. compaction properly & universal and laid to level, complete all as specified and directed. |
| 6 | M&L 15mm thick screed bed or bedding layer in CM 1:4 finished even & rough to receive tiling complete all as specified & directed. |
| 7 | M & L 28-30 mm thick chequered cement concrete tiles (lacquer coated) in any size & shape with 4-5 mm thick anti abrasive material topping layer (size, shape & shade as approved by GE), with grey cement and pigments, set, jointed and pointed in neat cement slurry as in floors/ path etc complete all as specified and as directed. |
| 8 | Supply and laying machine pressed / factory made chamfered edge cement concrete rubberised interlocking paver block, 60mm thick with 6 mm thick top layers of anti abrasive material of M-35 grade with any description, ( colour, design & pattern, & size/ shape, as approved by GE) as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness made by table vibratory method using PU mould, laid in required colour & pattern over and including M&L 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed. |
| 9 | M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, compaction/ consolidation with power roller, complete all as specified and directed. |
| 10 | S&F machine made precast cement concrete curb stone blocks using cement concrete 1:3:6 type C1 (20 mm graded stone agg) set in CM 1:6 complete all as specified and as directed. |
| 11 | Dismantling of fencing posts or struts (wood, steel or RCC) any section,embedded in Cement concrete under natural ground including taking out embedded portion and making good disturbed ground complete all as specified and as directed. |
| 12 | Excavating in post holes or similar holes each not n exc 0.50 cu.m,getting out any type of soil,returning,fillig in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm complete all as specified and as directed. |
| 13 | Demolition of stone / boulder masonry walling, built in cement mortar including all quoins, arches, pillars etc and removal unserviceable materials, debris, rubbish to out side MD land complete all as specified and directed. |
| 14 | M&L for squared rubble walling, Jodhpur type, regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6, complete all as specified and directed. |
| 15 | All as per item No. 14.00 here-in-above, but except stone including cleaning of old mortar from stones etc all as specified and directed |
| 16 | Extra over stone walling for hammer dressing to face stone & dressing of face beds & joints as specified of squared rubble walling Jodhpur type brought upto courses with maximum depression of face from straight edge held against the dressed surface n exc 20mm and dressing face beds and joints, complete all as specified and directed. |
| 17 | Dismantling of fencing wire mesh / GI cattle fencing, any type and any size complete all as specified and as directed. |
| 18 | Dismantling of barbed wire, any type and any size complete all as specified and as directed. |
| 19 | M&L for MS framed work as in fencing posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc & frame work for boards using MS hollow pipes sq/ rectangular incl supports etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work complete all as specified and directed. |
| 20 | Supply only Mild steel round or square bars 10mm dia.,in available length Fe-290 (Gde-165) for fixing of chain link fencing complete all as specified and as directed. |
| 21 | Supply only Chain link MS galvanised fencing any size or type (The max. size of mesh does not exc 50mm x 50mm and dia of wire exc 3mm.) as approved by G.E.Note:- BOO will consitute by GE to determinate the weight of chainlink. |
| 22 | Fixing only Chain link fencing including line wires,any mesh, size and type to any standards,rails straining bolts, etc. including provision of binding wire complete all as specified and as directed. |
| 23 | S&F galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and as directed.Note : - Each line wire to be measured. |
| 24 | Fixing only in repairs for Galvanised 2 stand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standered rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins complete all as specified and directed. |
| 25 | M&L mild steel bolts machine made 10mm dia of neck hexagonal or square head at one end and screwwed the other or screwd both ends each screwed end to be fitted with washers and one hexagonal or square exceeding 3 cm but not exceeding 5cm long complete all as specified and directed |
| 26 | M&L for type C1 1:3:6 (20 mm graded aggregate) precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in morter in CM 1:6 complete in walls. |
| 27 | M&L for plain cement concrete 1:3:6 type C-2 by using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete for fencing post complete all as specified and as directed . |
| 28 | Dismantling structural steel work including doors,gates but excluding framed truss etc. complete all as specified and as directed. |
| 29 | S&F framed work as in door or gates of angle, MS hollow pipes, solid SQ sections flat iron etc or other section with gusset plates, rails, braces etc complete with steel sheeting as required to be prepared for hanging or sliding with and including MS Channel as posts & hold fasts & suitable arrangements for locking etc complete all as specified and directed conforming to Fe 290 Gde E-165 |
| 30 | M&L for prepainted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550Mpa in roof coverings fixed with self tapping screws, complete all as specified and directed. |
| 31 | Taking down cement plaster on stone masonry, RCC surfaces, dado surfaces etc complete including racking out joints, hacking for key scrubbing down with water, complete all as specified and directed. |
| 32 | M&L for 15 mm thick rendering in CM 1:4 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished surface even and smooth without using extra cement, complete all as specified and as directed. |
| 33 | S & F Fibre glass reinforced translucent 2 mm thick corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof ,wall etc complete all as specified and as directed. |
| 34 | M&L preparation of new or previously untreated steel surface of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over & including M&L single coat of red- oxide, zinc chrome primer complete all as specified and as directed. |
| 35 | M&L for preparation of old painted steel surfaces of any description otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint of any tint complete all as specified and as directed . |
| 36 | M& L for precast cement concrete Type C-0 1:3:6 (12.50mm graded aggregate) as in louvres and jallies, cement grill any type model of Zafri , 35mm thick (measured solid), set in cement mortar 1:4 fixed with PCC post, incld. all mouldings complete all as specified and directed. |
| 37 | M&L for precast cement concrete1:3:6, type C-0 by using 12.5mm graded stone aggregate as in pillars of size 100 x100 mm and height 750mm to provide support of RCC jallies, jointed with neat cement slurry, in CM 1:6, complete all as specified and as directed. |
| 38 | M&L preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and as directed. |
| 39 | M&L two coat of cement base paint on wall over plaster/ unplastered surfaces including preparation of surface complete all as specified and as directed. |
| 40 | S&F in replacement identificatin sign/ cautionary mandatory and information sign board (as per sample) area exceeding 1.00 Sqm but not exceeding 1.50 Sqm with 2-3 mm thick aluminium composite panel covered by encapsulated lens type retro reflective sheet (grade 3 m type II diamond grade) on both side with any colour base fixed on and including stainless steel frame of size 25mmx25mm and hand on 50mm dia stainless pipe (fabrication work from SS 304 material) of height upto 2.5 m from the natural ground level to top and pot ebedded in ground with PCC 1:2:4 bype B2 using 40 mm graded stone aggregate of size 46cm x 45cmx 60cm including necessary excavation and earth work complete all as specified and directed.Note: (i) Shape/ design of sign board as approval by GE.(ii) The letters and symbols etc on both side shall be as per site requirement and as approved the size and font of wording as per direction of GE. |
| 41 | S&F in repairs 25-30 mm thick precast cement concrete 1:3:6 type C1 using 20mm graded stone aggregate as in Kangooras width 30 cm with intricate design on one side all as per sample, incl applying 2 coats of cement base paint on exposed surfaces, complete all as specified & directed. |
| 42 | Note:- (i) The contract sum shall be arrived at after duducting amount of schedule of \\"Credit\\" from the Total quoted amount Please Enable Macros to View BoQ information |
