Name of Work:- SPL REPAIR/REPLACEMENT/RENEWAL OF FURNITURE AGAINST SVY OFF CONDEMNATION BOARD FOR DARRANGA MIL STN UNDER GE RANGIA
Sl. No.
Item Description
1
FD-279 - Chair dining :- All wood shall seasoned first class hard wood free from knots and defects.Hard Nylon buffers shall be fixed at the bottom of legs with screws. Canning of chairs by true Godrej pattern with plastic cane 2mm to 2.5mm wide, quality as approved by GE all as specified and as shown on drgs.All wooden surface shall be french polished with glossy finish, shade as approved by GE.Rest all as specified/ shown in drawing and directed by Engineer-in-Charge.
2
FD-1043 - Trestle store room steel : Trestle shall be of overall size of 2440x600x300 mm. All members, strut and bracing shall be welded properly with good finishing. All steel surfaces shall be finished with two coats of synthetic enamel paint upto obtaining glossy finished over a coat of redoxide primer with spray gun after properly smoothening the surface with sand paper. Rest all as specified/ shown in drawing and directed by Engineer-in-Charge.
3
FD/MAP-II/03 - Table dining 6 Pers :- All wooden part shall be first class hard wood free from knots and defects.Top shall be 18 mm thick prelaminated particle board both side laminated duly covered with half round beading in matching shade with synthetic adhesive(Fevicol SH). All wooden surface shall be french polished with glossy finish. Rest all as specified/ shown in drawing and directed by Engineer-in-Charge.
4
CWE/TEZ/4 - Charpoy MS tubing plywood top : Plywood shall be BWR grade, fitted with nut and bolts. (Make of plywood: Century/ Green Ply/Archidply). Head board shall have 18mm thick Exterior grade both side prelaminated particle board fitted with half round teakwood beading all around with good finishing .PVC shoes shall be provided to legs of charpoy. All steel members shall be finished with two coats of synthetic enamel paint upto obtaining glossy finish over a coat of redoxide primer with spray gun after properly smoothening the surface with sand paper in black colour.Rest all as specified/ shown in drawing and directed by Engineer-in-Charge.
5
FD/E6/MAP/17 - Teapoy Verandah : Top shall be 18 mm thick prelaminated particle board both side laminated duly covered with half round beading in matching shade with synthetic adhesive(Fevicol SH). All steel and iron surfaces shall be finished with two coats of synthetic enamel paint upto obtaining glossy finish over a coat of redoxide primer with Spray gun after properly smoothening the surface with sand paper. Rest all as specified/ shown in drawing and directed by Engineer-in-Charge.
6
NOTE : (Applicable for all items):-(i) The bidders/contractors are advised to read relevant Contract drawings and Particular specifications, Key specifications, Special conditions and General conditions of Contracts before entry/quoting the rates.(ii) The items are to be manufactured as per relevant drawings and specifications and supplied to the Department. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
