|
| 1 | NOTES :- In case description of any two or more items of the schedule ‘A’ is same and the tenderer quotes different rates for such items, only lowest rate of such items will be considered for acceptance and subsequently payment will be made upon execution of the items accordingly. |
| 2 | Excavating in post holes (or similar holes) each n exc 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface in any type of soil, complete all as specified and directed. |
| 3 | Surface dressing in soft/loose soil n exc 15 cm deep complete all as specified. |
| 4 | Removing surplus excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point, complete all as specified and directed. |
| 5 | S&F Mild steel angle/flat iron/chanel framed work such as iron gate, ladder, SWT rame, grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified. |
| 6 | S&F Mild steel, plain, black sheet 1.60mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required etc complete. |
| 7 | M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. |
| 8 | M&L for Pre- painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. |
| 9 | S&F rolled mild Steel work Fe-410-W(Gde- E-250) quality-A' in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as spd. |
| 10 | S&F, plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment , conforming to Fe 410W (Grade E-250) quality 'A' complete all as specified and directed. |
| 11 | M&L, preparing new or previously untreated steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of surfaces complete all as specified and as directed. |
| 12 | Supply & Fix aluminium Powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing , fixing arrangements for frame etc complete all as specified and directed |
| 13 | Anodised aluminium door shutter, aluminium section weighing 0.55 Kg per M including necessary jointing cleats, glazing clips rubber neoprene packing, handles 2 nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified Note : Glass will be measured and paid seperately under relevant item |
| 14 | M&L 18/19mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination, fixed to timber framework complete all as specified and as directed. |
| 15 | S & F Aluminium (Die cast ) body door closer hydrolically regulated designation No.3 universal type suitable for door shutters of 851 to 1000mm in width and wt between 61 to 80 kgs. |
| 16 | S & F MS Mortice lock 4 leavers vertical type size 100mm |
| 17 | M&L for Sheet glass, 5.5mm thick ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified |
| 18 | M & L for Pre-cast cement concrete block masonry with solid blocks, Type C1 1:3:6 (20mm graded aggregate) exc. 10 cm in width and setting in cement mortar 1:4, complete |
| 19 | Taking down cement plaster on brick or stone etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed. |
| 20 | M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 , finished even and smooth without using extra cement complete. |
| 21 | M&L 10 mm th rendering in cement mortar 1:6 on brick or concrete wall surface of any description finished even & smooth (without using extra cement) complete all as specified and as directed |
| 22 | M&L for Preperaing new plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer all as specified. |
| 23 | M&L for Preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 24 | Mild steel TMT bars 10 mm dia and over, cut to length, bent ot shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified |
| 25 | M&L Hardcore of Broken stone / boulders of gauge n.exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rolled/rammed to a true surface complete all as specified |
| 26 | M & L 100 mm thick Cement concrete type B1, 1:2:4 (using 20 mm graded granite stone aggregate) in sub base of flooring/ hard standing finishing the surface even and smooth |
| 27 | M&L Cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate in plinth protection, 75mm thick, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at the length n exe 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete. |
| 28 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified. |
| 29 | M&L, 7 to 8mm thick coloured, joint free Non skid ceramic tiles of size 400 x 400mm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including screed bed or bedding layer 15mm thick in cement mortar 1:4 complete all as specified and as directed. Note: Shade, design/pattern of tiles shall be as approved by GE |
| 30 | M & L for Glazed ceramic tiles in vertical surface 300 x 450 x 6 to 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including screed bed 10mm thick in cement mortar 1:3 finished rough to receive wall tiles etc complete all as specified. |
| 31 | Taking down and refixing in the same opening after easing & adjusting shutter of size exc 1 sqm and n exc 2 sqm each complete all as specified. |
| 32 | Taking down Chowkats or frames with shutters not exceeding 1.5 Sqm each (Without taking off shutters from the frames) complete all as specified and directed |
| 33 | S&F wall anchor bolt Fasteners 8mm dia for concrete and masonry walls complete. |
| 34 | M&L for preparation of old painted surfaces of wall and applying one coat of cement base paint complete as all specified. |
| 35 | M&L for complete removal of existing treatment (upto plaster surface) of old painted surfaces including 2mm thick wall care putty and applying two coats of distemper oil emulsion on surfaces of walls complete all as specified and directed. |
| 36 | M&L, preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 37 | M&L, preparation of old painted steel surfaces of any description, over 10cm in width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 38 | S&F 25mm dia SS curtain rod, including suitable matching brackets , stops , rollers ect , complete all as specified and directed. |
| 39 | M&L for 20 mm thick screed bed or bedding layer in CM 1:6 for laying of floor finish. |
| 40 | M&L Colour Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick with grey pigment cement and pigmenst set ionted and pointed in neat cement slurry colour to match in floors . |
| 41 | M&L for preparing old painted steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of Aluminium paint over aluminium red oxide primer complete all as specified and directed. |
| 42 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. |
| 43 | M & L for excavating in trenches, n.exc. 1.5m wide and n. exc 1.5m in depth, for foundation, etc and getting out in any type of soil, complete all as spd and directed by engineer-In-charge. |
| 44 | M&L for Cement concrete Type D2 1:4:8 (40mm graded aggregate) as in foundations, filling and mass concrete |
| 45 | S&F Mild steel angle/flat iron/chanel framed work such as ornamental and intricate design iron gate, ladder, SWT rame, grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified. |
| 46 | S&F Mild steel, plain, black sheet 1.00mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required etc complete. |
| 47 | M&L for TMT bar bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete |
| 48 | -Ditto- but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete |
| 49 | M&L for formwork to flat rough finished sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work vertical or to batter complete |
| 50 | M&L for formwork to flat rough finished sides of pillars, posts, struts, piers, columns, and complete |
| 51 | M&L Reinforced Cement concrete Nominal Mix, Type B1 1:2:4 (20 mm graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under reamed piles and mass concrete |
| 52 | M&L for RCC Nominal Mix, Type B1 1:2:4 (using 20 mm grade stone aggregate) for columns, pillars, piers, posts and struts etc all as specified |
| 53 | Material and labour PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in copings complete all as specified and directed. |
| 54 | M&L, 18 to 20mm thick, approved machine cut, coloured Granite, factory polished, edges rounded in in skirting/ dado laid over cement screed 10mm thick in cement mortar 1:3, pointing with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone complete all as specified and directed. |
| 55 | Returning, filling incl spreading leveling watering and well ramming in layers n exc 25 cm thick each layer complete all as specified and directed by Engr -In Charge. |
| 56 | Rolling and consolidating formation surfaces with 8-12 ton power roller including filling in soft spots , hollows and depressions etc which occurs during rolling to required level gradient and camber etc including watering as necessary during rolling complete as speceified. |
| 57 | M&L Moorum / red bajri filling in berms or pavings, laid in layers n.exc 15cm thick, spred. Levelled and rammed including watering complete all as specified |
| 58 | M & L 100 mm thick Cement concrete type D2, 1:4:8 (using 40 mm graded granite stone aggregate) in sub base / sub floor complete all as specified |
| 59 | M&L for Cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified. Note : No extra cost to be paid to contractor if cement quantity increase in design mix. |
| 60 | Forming contraction (dummy) joints 65 mmx10 mm wide filled with sealing compound grade A complete. |
| 61 | Forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade A complete all as specified. |
| 62 | M&L Reinforced concrete 300mm bore pipe class NP-3 laid and jointed complete with collars all as specified and directed. |
| 63 | M&L for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 for 300mm bore dia pipe. |
| 64 | Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft and loose soils. |
| 65 | M&L for sand filling under floors or in foundations including watering and consolidation etc spread, levelled and rammed including watering complete all as specified and directed. |
| 66 | M&L machine pressed precast concrete inter locking paver block with grey cement and pigment (Reflective type)in any shape and size confirming to IS-15658-2006 of 60 mm thickness M-30 grade complete all as specified. |
| 67 | Removing excavated soil exc 50 m but not exc 250m away and depositing where directed at a level not exc 1.5 m from the starting point. |
| 68 | S&F PVC (SWR) pipe 110mm, single socketed, in any length with rubber ring joints, laid in trenches or floor complete all as specified. |
| 69 | M & L for point wiring with 1.5 sqmm FR grade PVC insulated and unsheathed stranded copper conductor cable,1100 volts grade as per IS-694 drawn through and including PVC casing/conduit complete with all fittings and acessories including PVC Board for mounting of switches, sockets, regulators, etc and 1.5 sq mm stranded copper conductor cable FR grade PVC insulated and unsheathed for earth continuity all as specified and directed for One light Point controlled by one one way switch. |
| 70 | All as per Ser item 68 above but for One Ceiling /Exhaust /wall Fan Point controlled by one one way switch. |
| 71 | Supply and fix ceiling rose surface backelite three terminals, PVC/polycarbonate, insulated body. |
| 72 | Supply and fix in repair switch piano flush type, 6 Amps 240 volts single pole one way. |
| 73 | Supply and fix in repair SP&N DBs, double door, 240 volt, 4 way complete all as specified and directed. |
| 74 | M&L in repair for MCB single pole, 240 volts, 6 - 32 Amps, 10 KA C Curve |
| 75 | M&L in repair for MCB single pole & neutral 240 volts 32Amps C curve. |
| 76 | Supply and fix in replacement 1200mm BLDC 5star rated ceiling fan with regulator enable motor with power input of 28Watt with 10% tolerance, motor insulation B, 230V , 50Hz, single phase A.C speed 350, Air delivery 215CMM with complete set of 3nos blades, down rod , 2 Nos canopies, shackel kit and all remaining accessories including nut bolts, washers ' including connecting up of cable from ceiling rose or connector to fan complete all as specified and directed. ake : Usha (Model No.Technix) or equivalent model in Havells/ OrientNote: - Old Unserviceable fans shall be deposited to MES store. |
| 77 | S&F wall mounted fan of Size 400mm Sweep, AC Single Phase. 230 Volt with Blades, Frame and , Providing Connection with and including 3 Core Flexible Copper Conductor Cable of suitable Size and Length , complete all as specified and as directed.Make : Havells pentaforce or equivalent model in Usha/ Orient |
| 78 | Supply and fix in repair 20 watt intregated LED tube light fitting 4 ft , suitable for single phase 230 Volts, 50 Hz AC supply and mounted on wall or ceiling, complete with all accessories internally prewired and including electrically connection with copper conductor cable of size 0.5 Sqmm (nominal area)all as specified. Make :Make - Havells/Crompton /Philips/ Wipro/ Vinay. |
| 79 | M&L for sub main wiring comprising single core , 2 Runs of 4 sqmm nominal cross sectional area,FRLS multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including appropriate dia. in PVC casing capping/conduit and its fittings complete surface/concealed including provision of 1X4 sqmm nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earth wire complete all as specified. Note: 2 runs of 4sqmm copper cable and one run of 4 sqmm copper earth wire and conduit/Casing & Capping will be measured as one length. |
| 80 | Supply And Fix flame proof type wall mounted air conditioner hi wall split units (indoor and outdoor) electric driven three phase of capacity 2 TR 440 v, 50 hz, complete with indoor and out door unit including cutting chaging stone/brick wall suitable for fixing indoor unit and making good disturbed surface complete all as specified and directed. Make Shyaam Cat Part No.SSPL/HC/508 or Equivallent Model in Sudhir |
| 81 | Supply and fix Servo Voltage stabilizer for automatic operation, three phase naturally air cooled indoor type & designed for input variation between 340 V to 480 V with output voltage stabilized at 415 V with accuracy of ± 1% and of capacity 10 KVA complete all as specified and directed. |
| 82 | Supply and fix flame proof electric switch socket and metallic plug top combination in LM-16 material rating 32 Amps 500 volts, 4 pole + earth with plug including necessary fixing arrangement & all outgoing electric connection complete all as specified and directed.. |
| 83 | M&Lfor making brick foundation and rain protection shed for outdoor unit of split type AC with angle iron of size 35x35x5 mm thickness and pre painted galvalume zinc coating GI based corrugated steel sheet 0.50 mm thick of any color having tensile strength of 550 Mpa fixed with self tapping screws including necessary cutting/welding and nuts/bolts for fixing of shed on brick/pcc foundation rendering 15 mm thick in cement mortar(1:4) over brick surface and painting steel surface with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 84 | Supply and fix submain wiring with Four runs of single core 4 sqmm FRLSH PVC insulated copper cable 1100 vots grade multistrand, unseathed conductor , surface type ,drawn into Steel conduit and all necessary fittings including 1x4 sqmm multi strand FRLSH PVC insulated copper wire for earth continuity conductor connected to common earth dolly complete including taking down old unserviceable sub main wiring of any size and making good disturbed surface complete all as specified and directed. Note: 4 runs of 4sqmm copper cable and one run of 4 sqmm copper earth wire will be measured as one length. Please Enable Macros to View BoQ information |
