|
| 1 | Taking down cement or cement lime plaster any description from walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 2 | M & L for rendering 15mm thick in cement mortar 1:4 on stone walls or other than fair faces of brick walls fiinished even and smooth without using extra cement, complete all as specified and directed. |
| 3 | M&L for preparation of new plastered wall surface including cornices etc and applying two coats of exterior emulsion all weather proof paint of Apex Ultima of ASIAN or equivelent make of any approved colour (multi colour pattern as approved by GE) over and including a coat of primer, complete all as specified and directed. |
| 4 | M&L for complete removal of existing treatment of wall surfaces, preparation of plastered or unplastered or untreated wall surfaces including cornices etc and applying two coats of exterior emulsion all weather proof paint of Apex Ultima of ASIAN or equivelent make of any approved colour (multi colour pattern as approved by GE), complete all as specified and directed. |
| 5 | Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillers etc, complete all as specified and directed. |
| 6 | M & L for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 7 | All as per Item No 6.00 here-in-before but except bricks. |
| 8 | M & L for providing plain cement concrete type B-1, 1:2:4, (using 20 mm graded stone aggregate), as in copings, bed block for embedding hold fasts, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required, complete all as specified and directed. |
| 9 | Demolition of RCC of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 10 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m indepth, for foundation, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil, complete all as specified and directed. |
| 11 | M&L for Plain Cement Concrete 1:4:8 type D2 (using 40mm graded granite stone aggregate) as in fondation, filling and mass, complete all as specified and directed. |
| 12 | M & L for providing RCC design mix M-25, (using 20 mm graded stone aggregate) as in foundation including rafts, footing, foundation beams, plinth beams, base of columns and the like, complete all as specified and directed. |
| 13 | M & L for providing RCC design mix M-25, (using 20 mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed. |
| 14 | M & L for providing RCC design mix M-25, (using 20 mm graded stone aggregate) as in Columns, pillars, piers, posts and struts, complete all as specified and directed. |
| 15 | Returning & filling of the excavated earth including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils, complete all as specified and directed. |
| 16 | Removing excavated soils not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point, complete all as specified and directed. |
| 17 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished flat surfaces of concrete. |
| 18 | Formwork to sides of square, rectangular or polygonal pillars, posts, struts, piers, columns and stanchions rough finished surfaces of conrete flat, complete all as specified and directed. |
| 19 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of conrete flat, complete all as specified and directed. |
| 20 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 21 | All as per Item No 20.00 here-in-before but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders. |
| 22 | S&F in repair galvanised, 2 strand, steel barbed wire 2.24mm dia with 2mm barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc, complete all as specified and directed. |
| 23 | S&F in repair concertina coil 1050mm dia, 56 loop, 2.5mm core wire heavy galvanished (wire-275 GSM & strip-200 GSM), tensile strength of wire 1400-1500 N/Sqmm, weight 14.63 Kg/coil, stretchable length 12M including securing or tying at crossings with and provision of galvanised mild steel wire, staples ot steel pins etc, complete all as specified and directed. |
| 24 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 25 | S&F angle iron posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, and grills and grating and for iron frame works similar work conforming to Fe-290 Gde E-165, complete all as specified and directed. |
| 26 | M&L for painting to new steel surfaces of any description over 10 cm in with or girth, not otherwise describe and applying two coats of synthetic enamel paints over a coat of red oxide primer, complete all as specified and directed. Please Enable Macros to View BoQ information |
