|
| 1 | Excavation in trenches n.exc 1.5 metre wide and n.exc 1.5 metre deep and getting out in hard/dense soil, complete all as specified and directed. |
| 2 | Returning filling in including spreading leveling, watering and well ramming in layers n. exc 25cm, complete all as specified and directed. |
| 3 | Removal of excavated material to be distance n.exc 50 metres and depositing where directed at a level n.exc 1.5m high from the starting point, complete all as specified and directed. |
| 4 | Cutting/boring of roads for laying of pipe of any type and size and making good road by providing soling with broken boulders or quarried stone, WBM of existing thickness and finally topping with bituminous macadum of existing thickness (bituminous macadum comprising of stone chipping and cold emulsion as per manufacturer's instructions) including necessary compaction by rolling etc. to match existing, complete all as specified and directed by Engr-In-Charge. |
| 5 | M & L for Cleaning of semi underground water storage tanks/ sump of capacity 50000 gallons, Nabha Gate. Cleaning shall be carried out by taking out algee scale, dirt and gravel deposited at bottom of tank and sludge to be disposed off to a distance not less than 15 metres from top circumference of tank including cleaning with water by adding bleaching powder removing moulds, fungus etc, and maikng it clean complete all as specified and directed by Engr-In-Charge. |
| 6 | M & L for PCC 1:3:6 type C-2 (40 mm grade atone aggregate) as in mass concrete for support to main line including necessary formwork, complete all as specified and directed by Engr-In-Charge. |
| 7 | Taking up cast iron / ductile iron water mains/pipes (including all fittings), with spigot and socket ends/ flanged ends and lead joints including burning out joints and recovering lead, including disconnecting pipes and fittings complete of size 150mm dia, complete all as specified and directed. |
| 8 | Taking up cast iron / ductile iron water mains/pipes (including all fittings), with spigot and socket ends/ flanged ends and lead joints including burning out joints and recovering lead, including disconnecting pipes and fittings complete of size 100mm dia, complete all as specified and directed. |
| 9 | Taking up cast iron / ductile iron water mains/pipes (including all fittings), with spigot and socket ends/ flanged ends and lead joints including burning out joints and recovering lead, including disconnecting pipes and fittings complete of size 80mm dia, complete all as specified and directed. |
| 10 | Ductile iron 150mm bore spun pipe K9 with internal cement mortar lining and external zinc coating with finishing layer of bitumen, manufactured, tested and duly marked in strict accordance with and conforming to IS: 8329/2000 (As per Indian amendment) in any length laid int renches complete all as specified and directed by Engineer in charge.Note : Jonts shall be measured and paid separately |
| 11 | Ductile iron 100mm bore spun pipe K9 with internal cement mortar lining and external zinc coating with finishing layer of bitumen, manufactured, tested and duly marked in strict accordance with and conforming to IS: 8329/2000 (As per Indian amendment) in any length laid int renches complete all as specified and directed by Engineer in charge.Note : Jonts shall be measured and paid separately |
| 12 | Ductile iron 80mm bore spun pipe K9 with internal cement mortar lining and external zinc coating with finishing layer of bitumen, manufactured, tested and duly marked in strict accordance with and conforming to IS: 8329/2000 (As per Indian amendment) in any length laid int renches complete all as specified and directed by Engineer in charge.Note : Jonts shall be measured and paid separately |
| 13 | Cast iron Sluice valve for water supply purpose with C.I. drilled flanged ends (integrally cast), class PN-1.6 conforming to IS-14846 of 2000, ISI marked with stainless steel spindle and iron wheel including jointing material complete such as rubber insertion packing rings with adequate size and requisite numbers nut, bolt and washer complete of the of size 150mm bore, including taking out old valve, any type, complete all as specified and directed. Note:- Flanged joints excavation and earth works will be measured and paid seperately. |
| 14 | Cast iron Sluice valve for water supply purpose with C.I. drilled flanged ends (integrally cast), class PN-1.6 conforming to IS-14846 of 2000, ISI marked with stainless steel spindle and iron wheel including jointing material complete such as rubber insertion packing rings with adequate size and requisite numbers nut, bolt and washer complete of the of size 100mm bore, including taking out old valve, any type, complete all as specified and directed. Note:- Flanged joints excavation and earth works will be measured and paid seperately. |
| 15 | Cast iron Sluice valve for water supply purpose with C.I. drilled flanged ends (integrally cast), class PN-1.6 conforming to IS-14846 of 2000, ISI marked with stainless steel spindle and iron wheel including jointing material complete such as rubber insertion packing rings with adequate size and requisite numbers nut, bolt and washer complete of the of size 80mm bore, including taking out old valve, any type, complete all as specified and directed. Note:- Flanged joints excavation and earth works will be measured and paid seperately. |
| 16 | Run lead joint to socket and spigot pipe and pipe fittings for 150mm bore of pipe on coming main line from main reservoir to BOSS, LSNS, USNS area, complete all as specified and directed by Engr-in-Charge. |
| 17 | Run lead joint to socket and spigot pipe and pipe fittings for 100mm bore of pipe on coming main line from main reservoir to BOSS, LSNS, USNS area, complete all as specified and directed by Engr-in-Charge. |
| 18 | Run lead joint to socket and spigot pipe and pipe fittings for 80mm bore of pipe on coming main line from main reservoir to BOSS, LSNS, USNS area, complete all as specified and directed by Engr-in-Charge. |
| 19 | M&L for Cutting of 100/80/50/40mm dia GI pipe and reducing to required length before laying and fixed in position for insertion of new tees, branches including welding, jointing with new pipe connection complete all as directed.Note : The items required for repalcement shall be measured and paid separately unde relevant items of BOQ. |
| 20 | Day to day maintenance /repair/rectification of water supply complaints against any kind of fault in GI/CI/DI/MS water distribution pipe line of any size or ‘No water supply’ complaint from building mounted OHT or any other complaint all as directed time to time by digging/ tightening of fittings/ cocking of lead in CI pipe joints/ replacing GI fittings etc including necessary excavation, returning filling and removing surplus soil (if required) and rectification of complaint to ensure satisfactory serviceability of the water supply by providing two plumbers with two helper on daily basis complete all as directed by Engineer-in-Charge.Notes:- (i) The items required to be replaced shall be measured & paid separately under relevant item of BOQ.(ii) The Contractor shall be fully responsible to provide necessary transportation, T&P and safety equipment to his labour to prevent any kind of accidents and department will not be responsible for any type of compensation to the contractor or his labour in case of any accidents, miss-happening to his workmen.(iii) In case any complaint informed to the contractor telephonically or verbally or on complaint slip is not rectified within 48 hours, the contractor shall be penalized @ Rs 200/- per complaint per day until rectification of complaint and shall be recovered from his dues.(iv) The contractor or his representative shall report to the concerned JE E/M daily in the morning at 9.00 AM to collect the complaints and shall deposit the same to this office after rect1ficat1on duly signed by the concerned user/ occupant of affected accn or area |
| 21 | Supply and fixing in replacement following items in day to day maintenance of water supply system : |
| 22 | GI Tee reducer 40 x 40 x 25mm |
| 23 | GI Tee reducer 50 x 50 x 25mm |
| 24 | GI Tee reducer 25 x 25 x 20mm |
| 25 | GI Tee reducer 20 x 20 x 15mm |
| 26 | GI Tee equal 25 x 25 x 25mm |
| 27 | GI Tee equal 20 x 20 x 20mm |
| 28 | GI Tee equal 15 x 15 x 15mm |
| 29 | GI Union 50 mm |
| 30 | GI Union 40 mm |
| 31 | GI Union 25 mm |
| 32 | GI Union 20 mm |
| 33 | GI Union 15 mm |
| 34 | GI barrel nipple 15 mm, 6 inches long, screwed at both ends |
| 35 | GI barrel nipple 15 mm, 4 inches long, screwed at both ends |
| 36 | GI barrel nipple 20 mm, 9 inches long, screwed at both ends |
| 37 | GI barrel nipple 20 mm, 6 inches long, screwed at both ends |
| 38 | GI barrel nipple 20 mm, 4 inches long, screwed at both ends |
| 39 | GI barrel nipple 25 mm, 4 inches long, screwed at both ends |
| 40 | GI screwed plug 15 mm |
| 41 | GI screwed plug 20 mm |
| 42 | GI screwed plug 25 mm |
| 43 | GI Elbow 15 mm |
| 44 | GI Elbow 20 mm |
| 45 | GI Elbow 25 mm |
| 46 | GI Elbow 40 mm |
| 47 | GI Elbow 50 mm |
| 48 | GI Socket 15 mm |
| 49 | GI Socket 20 mm |
| 50 | GI Socket 25 mm |
| 51 | GI Socket 40 mm |
| 52 | GI Socket 50 mm |
| 53 | Reducer Elbow GI 20 x 15 mm |
| 54 | Reducer Elbow GI 25 x 15 mm |
| 55 | Reducer Elbow GI 40 x 15 mm |
| 56 | Tank nipple 25 mm |
| 57 | Tank nipple 20 mm |
| 58 | Tank nipple 15 mm |
| 59 | Brick masonry valve pit of size 120x120x120cm (internal dimensions) with earth work in any type of soil, plain cement concrete M-10 type C-2 as in foundation, brick work in cement mortar 1:6 (01 cement : 06 coarse sand) 23cm thick, 15mm thick plaster in cement mortar 1:4 (01 cement : 04 coarse sand) internally and externally flush pointed in same mortar as the work proceeds flooring shall be 40mm thick in plain cement concrete M-15 (Nominal mix) laid over 75mm thick hard core top cover shall be made out of mild steel sheet 3.15mm thick fixed in angle iron frame made out of angle size 40x40x6mm with two number of hinges on one side and locking aggangement at other side with 50mm pad lock complete including painting with two coats of sythetic enamel pait over a coat of red oxide primer including dismantling existing valve pit, complete all as specified and directed. |
| 60 | Cast iron/ ductile iron ittings for spigot and socketed pipe i.e. bends (any type radius and angle) tapers any type (straight, bend, increasing decreasing or double socket etc) all sockets or socker and spigot collars, caps and plugs up to 150mm dia, complete all as specified and directed. |
| 61 | Repacking stuffing box of sluice valve spindle including taking apart and reassembling ensuring no water leakage by providing new gaskets, gland dori, nuts & bolts etc for smooth functioning of valve of size 250mm bore, complete all as specified and directed. |
| 62 | Repacking stuffing box of sluice valve spindle including taking apart and reassembling ensuring no water leakage by providing new gaskets, gland dori, nuts & bolts etc for smooth functioning of valve of size 100mm bore, complete all as specified and directed. |
| 63 | Strainer suitable for 150mm bore of pipe (AC/CI) with MS sheet 3mm thicknes including 30mm hole making on overall surface with 100mm pitch distance maintain from one hole to another in any direction and length 1200mm, fixed in poistion, complete all as specified and directed. |
| 64 | Supply only spun yarn for leakage control of any size of pipe line. |
| 65 | Dismantling water tanks exc. 500 ltr & nexc 1000 ltrs capacity and removing from site complete all as specified and directed.. |
| 66 | Dismantling water tanks exc. 1000 ltr & nexc 2000 ltrs capacity and removing from site complete all as specified and directed.. |
| 67 | M & L for rotational moulded polyethene water storage tanks 500 litrek lid) hoisted and fixed in position all as specified in SSR part-I, complete all as specified and directed. |
| 68 | M & L for rotational moulded polyethene water storage tanks 1000 litres capacity (cylindrical vertical with threaded closed top with tank lid) hoisted and fixed in position all as specified in SSR part-I, complete all as specified and directed. |
| 69 | Disconnecting existing PVC /Ferro cement/MS Tank of capacity exc 500 ltr but n exe 1000 ltrs setting aside (or lowering if required) for repairs, cleaning etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.Note :- Cleaning, repairing etc. shall be measured and paid separately. |
| 70 | Disconnecting existing PVC /Ferro cement/MS Tank of capacity exc 1000 ltr but n exe 2000 ltrs setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.Note :- Cleaning, repairing etc. shall be measured and paid separately. |
| 71 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.of tank capacity 500 ltrs, complete all as specified and directed. |
| 72 | Cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc.of tank capacity 1000 ltrs, complete all as specified and directed. |
| 73 | S & F 15mm dia ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed in repairs, complete all as specified and directed. Make : Prayag or equivalent as directed by Engineer in charge. |
| 74 | S & F 20mm dia ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed in repairs, complete all as specified and directed. Make : Prayag |
| 75 | S & F 25mm dia ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed in repairs, complete all as specified and directed. Make : Prayag Make : Prayag or equivalent as directed by Engineer in charge. |
| 76 | Gun metal globe or gate valves (ISI-marked) with iron wheel head, screwed both ends for iron pipe 50mm bore and fixed in repair, complete all as specified and directed. |
| 77 | All as per Srl item No 39 above but 40mm bore dia |
| 78 | All as per Srl item No. 39 above but 32mm bore dia |
| 79 | All as per Srl item No. 39 above but 25mm bore dia |
| 80 | All as per Srl item No. 39 above but 20mm bore dia |
| 81 | All as per Srl item No. 39 above but 15mm bore dia |
| 82 | Taking up or down steel tubing pipes with connection from trenches, ceilings, floors walls etc including cleaning for refixing or removing from site complete with all fittings (such as sockets, bends, elbows, unions, tees, diminishing pieces, caps and plug, Tee, short pieces etc) for 15mm dia pipe complete all as specified and directed. |
| 83 | All as per Srl item No. 45 above but 20mm bore dia |
| 84 | All as per Srl item No. 45 above but 25mm bore dia |
| 85 | All as per Srl item No. 45 above but 32mm bore dia |
| 86 | All as per Srl item No. 45 above but 40mm bore dia |
| 87 | All as per Srl item No. 45 above but 50mm bore dia |
| 88 | All as per Srl item No. 45 above but 80mm bore dia |
| 89 | Mild steel galvanised iron water tubing 15mm bore with screwed & socket joints, medium grade, galvanised, with all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. fixed to wall or ceiling or laid in floor in old existing or new routes, complete all as specified and directed. |
| 90 | All as per Srl item No. 52 above but 20mm bore dia |
| 91 | All as per Srl item No. 52 above but 25mm bore dia |
| 92 | All as per Srl item No. 52 above but 32mm bore dia |
| 93 | All as per Srl item No. 52 above but 40mm bore dia |
| 94 | All as per Srl item No. 52 above but 50mm bore dia |
| 95 | All as per Srl item No. 52 above but 80mm bore dia |
| 96 | Mild steel galvanised iron water tubing 15mm bore with screwed & socket joints, medium grade, galvanised, with all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. etc. laid in trenches in old existing or new routes or under roads, complete all as specified and directed. |
| 97 | All as per Srl item No 59 above but 20mm bore dia |
| 98 | All as per Srl item No. 59 above but 25mm bore dia |
| 99 | All as per Srl item No. 59 above but 32mm bore dia |
| 100 | All as per Srl item No. 59 above but 40mm bore dia |
| 101 | All as per Srl item No. 59 above but 50mm bore dia |
| 102 | All as per Srl item No. 59 above but 80mm bore dia |
| 103 | 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms), fixed in repair, complete all as specified and directed. |
| 104 | Cleaning of surrounding area of water storage tanks/sump/ BP tanks including plants and vegetation etc. and removing and deposited the same to a distance exc 50m away, complete all as specified and directed by Engr-In-Charge. |
| 105 | Supply only best quality bleaching powder grade 'A' ISI marked for water treatment purpose, complete all as specified and directed by Engr-In-Charge. Make:- DCM Shree Ram / Declibac Technologies / Shre Rayaseema or as approved by MES. |
| 106 | Supply only Ferric alum solid cake type (25 Kg/piece) material best quality for water treatment purpose, complete all as specified and directed by Engr-In-Charge. |
| 107 | Supply only Best quality AQUA FIT (Calcium based granular disinfectant for water treatment, more stable than chlorine gas and stronger than bleaching powder) in 45Kg packing plastic drum, complete all as specified and directed by Engr-In-Charge. Make:- Declibac/Purichlor or equivlant in makes as approved by MES. Please Enable Macros to View BoQ information |
