Tender For Repair And Maintenance Of Steel/Wooden Furniture Including Painting / Polishing At Officer Md Accn Under Ge (Army) No 2 Jodhpur As Per Cpp Ser No 35, Jodhpur-Rajasthan

TDR : 55300892

Tender Notice
BOQ

19 Days Left

Jodhpur , Rajasthan

Tender Brief : Tender For Repair And Maintenance Of Steel/Wooden Furniture Including Painting / Polishing At Officer Md Accn Under Ge (Army) No 2 Jodhpur As Per Cpp Ser No 35

Document Fees
₹ 500 /-

EMD
₹ 80000.0 /-

Tender Value
₹ 40 Lakhs /-

Submission Date
21-05-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Replacement of following u/s parts of \\"Almirah large steel 1/2h x 1/2s\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD-1033) at site
2	S&F New lock of 6 lever with duplicate key of approved quality.
3	S&F new shelves made out of 1.00 mm thick CRCA sheet fixed with welding/riveted.
4	S&F new handle of 110 mm Stainless Steel heavy components with nut and bolt as approved by GE.
5	S&F new hinges (75mm).
6	S&F new legs made out of 1mm thick CRCA sheet fixed with welding/riveted.
7	S&F new Stainless Steel 20 mm dia hanging rod of existing shape and size.
8	S&F new locking device with plunger rod of suitable pattern to the locking system of Almirah steel.
9	M&L for Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including removal of dents/bends & welding all as specified and as directed.
10	Replacement of following u/s parts of \\"Almirah large steel with shelves\\" with suitable new parts of existing shape & size complete to match the original as per drg and directed by Engr-In Charge. (FD-67, 1031) at site.
11	S&F New lock of 6 lever with duplicate key of approved quality.
12	S&F new shelves made out of 1.00 mm thick CRCA sheet fixed with welding/riveted.
13	S&F new handle of 110 mm Stainless Steel heavy components with nut and bolt as approved by GE.
14	S&F new hinges (75mm).
15	S&F new legs made out of 1mm thick CRCA sheet fixed with welding/riveted.
16	S&F new locking device with plunger rod of suitable pattern to the locking system of Almirah steel.
17	M&L for Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two or more coat of synthetic enamel paint (spray painting) of approved quality including removal of dents/bends & welding all as specified and as directed.
18	Replacement of following u/s parts of \\"Almirah med steel with shelves\\" with suitable new parts of existing shape & size complete to match the original as per drg and directed by Engr-In Charge. (FD-243, 1032) at site.
19	S&F New lock of 6 lever with duplicate key of approved quality.
20	S&F new shelves made out of 1.00 mm thick CRCA sheet fixed with welding/riveted.
21	S&F new handle of 110 mm Stainless Steel heavy components with nut and bolt as approved by GE.
22	S&F new hinges (75mm).
23	S&F new legs made out of 1mm thick CRCA sheet fixed with welding/riveted.
24	S&F new locking device with plunger rod of suitable pattern to the locking system of Almirah steel.
25	M&L for Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including removal of dents/bends & welding all as specified and as directed.
26	Replacement of following U/S parts of \\"Bed Hard Steel with Plywood\\" suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge (FD/E6/MA/P/08) at site.
27	S&F new headrest made out of 18mm thick prelaminated MDF board of exterior grade fixed with screws including 2mm thick PVC edging.
28	S&F new footrest made out of 18mm thick prelaminated MDF board of exterior grade fixed with screws including 2mm thick PVC edging.
29	S&F new 12mm thick BWR phenol bonded commercial ply of size 1980x900mm , fitted with suitable nut & bolt.
30	S&F new hard Rubber Shoes.
31	M&L for Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including removal of dents/bends & welding all as specified and as directed.
32	Replacement of following U/S parts of \\"Charpoy Hard Top MAP\\" with suitable new parts of existing shape & size complete as per drg and directed by Engr-In-Charge FD/MAP/-II/01 at site.
33	S&F new 12mm thick BWR phenol bonded commercial ply of size 1980x900mm , fitted with suitable nut & bolt.
34	S&F suitable new hard Rubber Shoes.
35	M&L for Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two or more coat of synthetic enamel paint (spray painting) of approved quality including removal of dents/bends & welding all as specified and as directed.
36	Replacement of following U/S parts of \\"Computer chair revolving/high back and med back\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD/E6/MAP/01) at site.
37	S&F new 12 mm thick hot pressed plywood for seat as shown on drg.
38	S&F new moulded polyurethane foam of 50mm thick with 32 density for seat.
39	S&F new tapestry cloth/leatherite rexine as approved by GE (cloth/rexine shall not be less than 300/- per RM) alongwith PVC lipping all round the seat.
40	S&F new 12 mm thick hot pressed plywood for back as shown on drg.
41	S&F new moulded polyurethane foam of 50mm thick with 32 density for back
42	S&F new tapestry cloth/leatherite rexine as approved by GE (cloth/rexine shall not be less than 300/- per RM) alongwith PVC lipping all round the back.
43	S&F new armrest made of black integral skin polyurethane & hardness with nuts & bolts as approved by Engr in charge.
44	S&F new hydraulic system with droplift mechanism of backrest adjusted as per existing shape & size.
45	S&F new MS bearing of existing shape & size of various type chair revolving steel.
46	S&F new wheeled 4/5 prong base of existing shape & size with nut & bolts to chair revolving steel of various types.
47	S&F suitable caster wheels of existing shape & size with nut & bolts as approved by Engr-in-Charge.
48	Two or more coat painting of synthetic enamel paint on frame of Chair computer with high class finishing including necessary welding and smoothness of surface.
49	Replacement of following U/S parts of \\"Chair Writing MAP/Chair Visitor\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD/E6/MAP/12) at site.
50	S&F new12 mm thick hot pressed plywood for seat.
51	S&F new moulded polyurethane foam of 50mm thick with 32 density for seat as approved by GE
52	S&F new tapestry cloth alongwith PVC lipping all round the seat)
53	S&F new12 mm thick hot pressed plywood for back
54	S&F new moulded polyurethane foam of 50mm thick with 32 density for Back as approved by GE .
55	S&F new tapestry alongwith PVC lipping all round the Back)
56	S&F suitable new armrest made of black integral skin polyurethane & hardness with nuts & bolts.
57	S&F new rubber stopper.
58	M&L for two or more coat spray painting of synthetic enamel paint with high class finishing, including necessary rubbing, scrapping, denting, welding and leveling as specified & directed by Engr-In-Charge
59	Replacement of following U/S parts of \\"Charpoy folding GI Pipe\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD-388 R) at site.
60	S&F suitable new 12mm thick BWR phenol bonded commercial ply of size 1800x900mm, fitted in two pieces with suitable nut & bolt.
61	Tightening of complete charpoy by suitable size nut & bolt as directed by Engr-in-Charge on site.
62	S&F new PVC shoes.
63	M&L for Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including removal of dents/bends & welding all as specified and as directed.
64	Replacement of following u/s parts of \\"Rack shoe steel \\" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD/E6/Map/02 (R). at site
65	S&F New Rubber Shoes.
66	Replacement of MS wire mesh of shelves of Rack shoe steel as shown on drg and directed by Engr-in-Charge
67	M&L for two or more coat spray painting of synthetic enamel paint with high class finishing, including necessary rubbing, scrapping, denting, welding and leveling as specified & directed by Engr-In-Charge
68	Replacement of following u/s parts of \\"Computer table\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and all directed by Engr-In-Charge (FD/E6/MAP/03 ) at site.
69	S&F new top of 18mm thick MDF board of exterior grade duly postforming laminated including 0.8mm thick pvc edge-banding with auto-lipped through-feed.
70	S&F new side plank of 18mm thick prelaminated MDF board as shown on drg.
71	S&F new keyboard tray of 18mm thick prelaminated MDF board including beading.
72	S&F of new heavy duty of suitable size telecscopic channel for smooth functioning of key board drawer.
73	S&F different new parts of drawers : Top/Side/Bottom of existing shape and size made of 18mm thick prelaminated MDF board.
74	S&F of new bottom shelf of 18mm thick pre- laminated MDF board including beading .
75	S&F of new adjustable hard shoes all as directed by Engr-in-Charge.
76	M&L for two or more coats synthetic enamel black paint on steel frame surface with high class finish including necessary rubbing, denting, welding and smoothness surfaces all as directed by engr in charge.
77	Replacement of following u/s parts of \\" Teapoy Verandah \\" with suitable new parts of existing shape & size complete to match the original as shown on drg and all directed by Engr-In-Charge. ( FD-255, 383, FD/E6/MAP/17) at site.
78	S&F new top of 18mm thick MDF board of exterior grade duly postforming laminated finish including 0.8m thick pvc edge-banding with auto-lipped through-feed.
79	M&L for Rubber shoes
80	M&L for Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting, welding and making the surfaces smooth and applying two coat of approved shade synthetic enamel paint as specified & directed by Engr-In-Charge.
81	Replacement of following u/s parts of \\" Table bed side MAP\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and all directed by Engr-In-Charge. (FD/E6/MAP/15) at site
82	S&F new top of existing size made of 18mm thick prelaminated MDF board including 0.8m thick pvc edge-banding with auto-lipped through-feed.
83	S&F different new parts of small drawers : Top/Side/Bottom of existing shape and size made of 18mm thick prelaminated MDF board & 12 mm thick commercial ply wood.
84	S&F different new parts of large drawers : Top/Side/Bottom of existing shape and size made of 18mm thick prelaminated MDF board & 12 mm thick commercial ply wood.
85	S&F suitable size new back of table bed side, made out of 12 mm thick commercial ply wood duly screwed as shown on drg as directed.
86	S&F suitable size new sides of table bed side, made out of 18mm thick prelaminated MDF board duly screwed as shown on drg as directed.
87	S&F of new heavy duty of suitable size of telecscopic channel for smooth functioning of drawer as approved by GE.
88	S&F of new handle for drawer of table bed side MAP as approved by GE.
89	S&F of new hard rubber shoes (black) to legs of table bed side MAP as approved by GE.
90	Repalcement of old u/s front legs of table bed side with new front legs made out of 18mm MS square pipe (18 gauge) as shown on drg as directed.
91	Repalcement of old u/s rear legs of table bed side with new rear legs made out of 18mm MS square pipe (18 gauge) as shown on drg as directed.
92	Tightening of complete table by suitable size nails & screw as directed by Engr-in-Charge on site.
93	M&L for two or more coats synthetic enamel black paint on steel frame surface with high class finish including necessary rubbing, denting, welding and smoothness surfaces all as directed.
94	Replacement of following u/s parts of \\"Book Case glass front steel\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD-90(m) ,1028). at site
95	S&F New lock of 4 lever (set of 4 lock) with duplicate key of approved quality.
96	S&F new CP handles complete with nut and bolt as approved by GE.
97	S&F of new glasses of 4mm thick best quality ISI marked as specified & directed.
98	M&L for Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including removal of dents/bends & welding all as specified and as directed.
99	Replacement of following u/s parts of \\" Table Centre with Glass Top \\" with suitable new parts of existing shape & size complete to match the original as shown on drg and all directed by Engr-In-Charge. (FD-375) at site
100	10 mm thick Plate Tinted Glass duly edge must be polished and smooth . The colour of glass as per directed by Engr-in- charge.
101	M&L for steel polish of approved shade and quality for smooth shining and finishing (after rubbing/scrapping ) to complete frame as per existing shape and shown on drg and as directed by Engr-in-Charge
102	S&F of new Vaccum Rubber Shoe for fixing of Glass Top as per existing shape and shown on drg and as directed by Engr-in-Charge
103	S&F of new Rubber shoes
104	Replacement of following U/S parts of \\"Bed Hard with ply top\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. ( FD-21, 246, 264) at site
105	S&F 04 mm thick both side teak face ply all over the head rest of bed including teak wood beading.
106	S&F 04 mm thick both side teak face ply all over the foot rest of bed including teak wood beading .
107	S&F new long rail made out of teak wood size1800x90x35mm as per drg and directed by Engr in charge.
108	S&F new short rail/center stiffner made out of teak wood size 900x90x35mm as per drg .
109	S&F new 12mm thick BWR phenol bonded commercial plywood of size 1800x900mm , fitted with suitable nut & bolt complete to match the existing shape and size.
110	Tightening of complete Bed Hard by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site.
111	M&L for one or more coat french wooden polish of approved shade and quality and including one coat of lacquer polish for smooth shining and finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
112	Replacement of following U/S parts of \\"Chair Easy FD\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD-229) at site.
113	S&F of new Front/Rear legs
114	S&F of new Side rails (including holes for caning)
115	S&F of new Front/Rear rails (including holes for caning)
116	S&F of new Arm/Handles
117	S&F of new Stiffeners
118	Buffers
119	Tightening of complete chair by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site.
120	M&L for one or more coat french wooden polish of approved shade and quality and including one coat of lacquer polish for smooth shining and finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
121	Replacement of following U/S parts of \\"Peg Table\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD-277) at site.
122	S&F new top of 18mm thick MDF board of exterior grade duly postforming laminated finish including 0.8mm thick pvc edge-banding with auto-lipped through-feed.
123	Long rails
124	Short rails
125	Stiffeners
126	Buffers
127	Tightening of complete Peg Table by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site.
128	M&L for one or more coat french wooden polish of approved shade and quality and including one coat of lacquer polish for smooth shining and finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
129	Replacement of following u/s parts of \\" Table Centre \\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and all directed by Engr-In-Charge. (FD-235, 274, 393) at site.
130	S&F new top of 18mm thick MDF board of exterior grade duly postforming laminated finish including 0.8mm thick pvc edge-banding with auto-lipped through-feed.
131	Long rails
132	Short rails
133	Wooden battens
134	Rubber shoes
135	Tightening of completeTable Centre by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site.
136	M&L one or more coat Melamine wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
137	Replacement of following U/S parts of \\"Table Dining 4 Person (1200x900x760mm) \\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg directed by Engr-In-Charge. ( FD/MAP/II/03). at site
138	S&F new top of 18mm thick prelaminated MDF Board of exterior grade including 0.8mm thick PVC edge beading with auto-lipped through-feed.
139	Long rail
140	Short rail
141	Buffers
142	Tightening of complete Table Dining by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site.
143	M&L one or more coat french wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
144	Replacement of following U/S parts of \\"Table Dining 6 Person\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD 239, 273 & FD/MAP/II/03) at site.
145	S&F new top of 18mm thick prelaminated MDF Board of exterior grade including 0.8mm thick PVC edge beading with auto-lipped through-feed.
146	Long rail
147	Short rail
148	Buffers
149	Tightening of complete Table Dining 6 person by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site.
150	M&L one or more coat Melamine wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by
151	Replacement of following U/S parts of \\" Table Dressing Ladies\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD- 251, 378) at site.
152	S&F drawer of preleminated MDF board 18mm thick exterior grade duly fixed with 0.8mm thick PVC beading as per drg and as directed by Engr-in-Charge.
153	S&F suitable new acrylic knob as approved by GE.
154	S&F frame of first class hard wood (Teak) including 6mm thick ply wood for back side of mirror duly fixed with frame as per drg and as directed by Engr-in-Charge
155	S&F suitable new electro copper plated mirror of polished sheet glass of first class quality ISI marked size 1220x366x5mm thick as approved by GE.
156	S&F suitable new table top/bottom of prelaminated MDF board of 18mm thick one side teak finish and other side white with 4mm thick half round teak wood beading
157	S&F suitable new side plank of prelaminated MDF board of 18mm thick with 4mm thick half round teak wood beading
158	S&F suitable size new leg of 1st class hard wood teak as per drg and as directed by Engr-in-Charge.
159	S&F suitable new plain sliding glass as per drg and as directed by Engr-in-Charg.
160	Tightening of complete Table Dressing Ladies by suitable size screw & nails as directed by Engr-in-Charge at site.
161	M&L one or more coat french wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
162	Replacement of following U/S parts of \\"Table Dressing (ladies) with Stool \\" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD/MAP-II/07) at site.
163	S&F suitable new electro copper plated mirror of polished sheet glass of first class quality ISI marked size 1220x380x5mm thick as approved by GE.
164	S&F different new parts of drawers : Top/Side/Bottom of existing shape and size made of 18mm prelaminated MDF board & 12 mm thick ply wood with 4mm thick 0.8mm PVC edge beading as per drg & directed.
165	S&F suitable new 6mm thick ply wood for back side of mirror duly fixed with frame as per drg and as directed by Engr-in-Charge
166	S&F suitable new top of table dressing ladies (box) of prelaminated MDF board of 18 mm thick with 4mm thick half round teak wood beading.
167	S&F suitable new side planks of table dressing (box) of prelaminated MDF board of 18mm thick with 4mm thick half round teak wood beading.
168	S&F suitable new door plank of table dressing (box) of prelaminated MDF board of 18mm thick with 4mm thick half round teak wood beading.
169	S&F suitable new bottom (box) of 12mm thick plywood as shown on drg.
170	S&F suitable new stainless steel piano hinges and one nos magnetic catcher as shown on drg.
171	S&F of new heavy duty mild steel telecscopic channel for smooth functioning of drawer as approved by GE.
172	S&F suitable new 50 mm long 'D' shaped stainless steel handle as approved by GE.
173	S&F suitable new 75 mm long 'D' shaped stainless steel handle as approved by GE.
174	S&F new cushion foam of 75mm thick and 40 density for seat of stool dressing (box) as shown on drg.
175	S&F new leatherite cloth for seat of stool dressing (box) as shown on drg as approved by GE.
176	S&F suitable new heavy duty revolving nylon double wheels for stool dressing (box) as shown on drg.
177	Tightening of complete Table Dressing Ladies by suitable size screw & nails as directed by Engr-in-Charge at site.
178	M&L one or more coat french wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
179	Replacement of following U/S parts of \\"Table Writing FD\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD-33, 249, 275) at site.
180	S&F new top of 18mm thick MDF board of exterior grade duly postforming laminated finish including 0.8mm thick pvc edge-banding with auto-lipped through-feed.
181	Leg (35x35x760mm)
182	Long rails
183	Short rails
184	S&F of new sides of box made of 18mm thick Pre laminated MDF board as per drg and directed by Engr-In-Charge.
185	S&F of new door made of 18mm thick Pre laminated MDF board fixed with suitable piano type hinges alongwith 04mm thick teak wood beading as directed by Engr-In-Charge.
186	S&F of new self of 18mm thick Pre laminated MDF board as per drg and directed by Engr-In-Charge.
187	S&F of new central leg (150 to 200mm long) of teak wood as per directed by Engr-In-Charge.
188	S&F suitable new knobs / handle of approved quality.
189	Buffers
190	S&F different new parts of drawers : Top/Side/Bottom of existing shape and size made of 18mm prelaminated MDF board & 12 mm thick commercial ply wood with 4mm thick teak wood half round beading as per drg & directed.
191	S&F of new back ply of 6mm thick as per drg and as directed by Engr-In-Charge.
192	Tightening of complete Table Writing by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site.
193	M&L one or more coat french wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
194	Replacement of following U/S parts of \\"Teapoy\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD-232, 278, 382) at site.
195	S&F new top of 18mm thick MDF board of exterior grade duly postforming laminated finish including 0.8mm thick pvc edge-banding with auto-lipped through-feed.
196	Long rails
197	Short rails
198	Stiffeners
199	Buffers
200	Tightening of complete Teapoy by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site.
201	M&L one or more coat french wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
202	Replacement of following U/S parts of \\"Dressing Gents with Mirror Map\\" with suitable size new parts of existing shape & size complete to match the original as per drg and directed by Engr-In-Charge at site.
203	S&F suitable new 5mm thick looking mirror with back supported by 06mm plywood of existing shape & size with suitable nut & bolts.
204	S&F suitable new 12mm thick back ply of box .
205	S&F new top/base of table dressing made out of 18/19mm thick prelaminated MDF board ,one side teak finish and other side white.
206	S&F new side planks of table dressing made out of 18/19mm thick prelaminated MDF board ,one side teak finish and other side white.
207	S&F of new piano hinges and one nos magnetic catcher as shown on drg.
208	S&F of new 05 mm thick plain glass self in table dressing as shown on drg.
209	S&F complete new beading of 4mm thick and fixed with headless nail.
210	Tightening of complete table by suitable size nails as directed by Engr-in-Charge on site.
211	M&L for two or more coat french polish with high class finishing.
212	Replacement of following U/S parts of \\" Sofa Set 4/5 Seater\\" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg including re cushioning of sofa set 02,03,04 & 05 and directed by Engr-In-Charge. (FD-258, 281, 373) at site.
213	Front/Rear legs
214	Side rails
215	Front/rear side long rails
216	Arm/Handles
217	Wooden battens
218	Buffers
219	Tightening of complete Sofa Set 4/5 Seater by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site.
220	For 4 Seater M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
221	For 5 Seater M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
222	Re-Cushioning of sofa set 02,03,04 & 05 seater : (FD-258, FD-281, FD-373)
223	S&F suitable size new cloth cover with YKK chain for sofa cushion size 22”x21”x4” of superior quality tapestry cloth including markin as approved by GE,
224	S&F new cushion foam 100mm thick and 40density, size 22”x21”x4” of superior quality as approved by GE.
225	Replacement of following unserviceable parts of \\"Bin Soiled Multipurpose\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and all directed by Engr-In-Charge. FD-244 & FD/E6/MAP/09 at site
226	S&F new shelves made out of 18mm thick prelaminated MDF board exterior grade including PVC beading ..
227	S&F new top of Bin Soiled multipurpose made out of 18mm thick prelaminated MDF board exterior grade with PVC beading.
228	S&F new doors made out of 18mm thick prelaminated MDF board with PVC beading, fixed with piano hinges.
229	S&F new 100 mm long handle as per approved by GE.
230	S&F different new parts of drawers : Top/Side/Bottom of existing shape and size made of 18mm prelaminated MDF board & 12 mm thick commercial ply wood with 4mm thick 0.8mm PVC edge beading as per drg & directed.
231	S&F new base made out of 18 mm thick prelaminated MDF board.
232	S&F new sides made out of 18 mm thick prelaminated MDF board.
233	S&F new back made out of 18 mm thick prelaminated MDF board.
234	Tightening of complete Bin Soiled multipurpose by suitable size nails & screw as directed by Engr-in-Charge on site.
235	M&L for two or more coats french polishing with high class finishing as directed by Engr-in- charge.
236	Replacement of following unserviceable parts of \\"Side board\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and all directed by Engr-In-Charge. (FD-26(M), 241, 391, 1112) at site.
237	S&F new shelves made out of 18mm thick prelaminated MDF board exterior grade including PVC beading ..
238	S&F new top of side board made out of 18mm thick prelaminated MDF board exterior grade with PVC beading.
239	S&F new doors made out of 18mm thick prelaminated MDF board with PVC beading, fixed with piano hinges.
240	S&F new 100 mm long handle as per approved by GE.
241	S&F different new parts of drawers : Top/Side/Bottom of existing shape and size made of 18mm prelaminated MDF board & 12 mm thick commercial ply wood with 4mm thick 0.8mm PVC edge beading as per drg & directed.
242	S&F new base made out of 18 mm thick prelaminated MDF board.
243	S&F new sides made out of 18 mm thick prelaminated MDF board.
244	S&F new back made out of 18 mm thick prelaminated MDF board.
245	Tightening of complete side board by suitable size nails & screw as directed by Engr-in-Charge on site.
246	M&L for two or more coats french polishing with high class finishing as directed by Engr-in- charge.
247	Replacement of following U/S parts of \\"Hat Stand\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD-23, 233, 362) at site.
248	S&F 4mm thick teak face decorative plywood fixed with fevicol tipped with teak wood edging all round size 1330x710 mm as per drg and as directed by Engr-in-Charge.
249	S&F of Mirror of size 300x440x5mm thick as per drg. Make-Saint Gobin/Modi Guard
250	S&F of Aluminium Peg set 120 mm with mark of approved shape and size.
251	M&L for two or more coat french polish with high class finishing.
252	Repair and re canning of \\"Chair Verandah\\" as per existing shape & size complete to match the original as per drg and all directed by Engr-In-Charge. (FD-256 ) at site.
253	Re-canning of chair verandah with 4/5mm wide and half round superior quality white plastic cane
254	Removing the existing unserviceable cane plastic / newar from the chair verandah and supply and fixing PVC seat 4mm thick in lieu of cane after providing two additional stiffener at centre of seat & back with 25x5 mm flat Iron welded with centre of the frame duly white painted for support of PVC seat. .Due care shall be taken while fixing the PVC seat, The PVC seat shall get approved from BSO before supply.
255	Two or more coats of white synthetic enamel paint on entire steel/iron frame with high class finishing including necessary scrapping and smoothness of surface.
256	Tuck welding to broken legs and frames of chair verandah
257	S&F of new PVC shoes 20mm dia at bottom of legs.
258	Replacement of following u/s parts of \\"Chair dining MAP Officer\\" with suitable new parts (teak wood) of existing shape & size complete to match the original as shown on drg at site and directed by Engr-In-Charge. (FD/MAP-II/04) at site.
259	S&F of front legs.
260	S&F of rear legs.
261	S&F of stiffeners.
262	Replacement of old torn u/s cloth of seat with new synthatic tapestry cloth of best quality not less than Rs. 350/mtr as approved by GE, along with new markin cloth of matching colours as per drg or as directed.
263	Replacement of u/s plywood of seat with 12mm new comercial plywood.
264	Replacement of u/s foam of seat with new foam of 75mm thick with 40 density and fixing it with seat as per drg or as directed.
265	S&F of new Buffers
266	Tightening of complete chair by suitable size screw/ nails/bamboo skewers & wood corner (whereever required) as directed by Engr-in-Charge at site.
267	M&L one or more coat Melamine wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed by Engr-in- charge.
268	Repair/Replacement of following u/s parts of \\"TV trolly\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge
269	S&F of new top of 18 mm thick prelaminated MDF board including 4mm thick teak wood half round beading all round of top as directed.
270	S&F of new bottom / side planks of 18 mm thick prelaminated MDF board including 4mm thick teak wood half round beading as shown on drg as directed.
271	S&F of shutters shall be of plain glass 5.5 mm thick duly fitted with stainless steel hinges of reqd length as per drg or as directed by Engr-in-charge.
272	S&F of magnetic catcher shall be provided as shown on drg as directed.
273	S&F of coasters made of stainless steel body with hard rubber roller as shown on drg as directed.
274	Tightening of complete trolly by suitable size nails & screw as directed by Engr-in-Charge on site.
275	M&L for two or more coats french polishing with high class finishing as directed by Engr-in-charge.Note - (i) Repair/Maint work will be executed where the furniture exist in different users /Md Accn under AOR of GE (A) No 2 Jodhpur as directed by Engr-in-Charge/BSO.(ii) The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ. Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Rajasthan Tenders

Furniture Tenders

Furniture Items Tenders

Wooden Furniture Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Repair And Maintenance Of Steel/Wooden Furniture Including Painting / Polishing At Officer Md Accn Under Ge (Army) No 2 Jodhpur As Per Cpp Ser No 35, Jodhpur-Rajasthan

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Repair And Maintenance Of Steel/Wooden Furniture Including Painting / Polishing At Officer Md Accn Under Ge (Army) No 2 Jodhpur As Per Cpp Ser No 35, Jodhpur-Rajasthan

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us