|
| 1 | E/W in cutting or in embenkment in ordinary soil exavation to be in the form of regular pits not exceeding .50m in depth and E/w in embenkment to be in 20 cm layers including remming and dressing the surface to required levels and slops i/c all lead 8 km, cartage |
| 2 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitablematerial. |
| 3 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 P.C.C Nominal mix 1:3:6 |
| 4 | Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 |
| 5 | Supplying, fitting and placing TMT bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202 |
| 6 | Supply and laying of following size pipes for distribution system conferming to letest/ relevent I.S. 4985/2000 specification with all jointing materials and specials conferming to letest/relevent I.S. specification including F.O.R. destination and all texes and insurance etc. with loading,unloading and carting upto site of work, also including specials for these pipes and lowering them into the trenches and laying true to alignment and gradient and jointing etc. complete (including testing of pipelines and cutting of pipes for making up the length but excluding the cost of trenches ) all complete as per instructions of Engineer-in-charge as per UPJN SOR (150 mm dia PVC Pipe 6 KG/CM² |
| 7 | Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification. Including Labour Cess |
| 8 | Supply & Fixing of hot dip G.I. Octagonal pole 9 mtr long 3mm thick sheet , with base plate and single arm over hang of 70mm dia complete i.e. M.S. Clamp, loading unloading, grouting 1:2:4 cement,coarse sand & stone grit and 4 no. Foundation bolts with checknut. as per s.i. no. 645 |
| 9 | Supply and Laying of A.L. Conductor PVC insulated armourd cable 1100 V grade 25 sq mm 3.5 core on pole as per s.i. no. 501j |
| 10 | Supply and Laying of CPVC Pipe 50 mm dia Complete in all respect as per DSR Chapter18.9.6 |
| 11 | Supply and Laying of A.L. Conductor PVC insulated armourd cable 1100 V grade 10 sq mm 2 core on pole as per s.i. no. 501b |
| 12 | Supply and fixing of LE.D. street light fitting having die cast aliminium body and difuser suitable for 110-130 watt. And conferming to IP 66 Protection having company LOGO Engraved complete in all respect witted driver set (not circuitory) with BIS no. written on it, current drive shall be <1050 A, phase to phase protection at 440 v upto 8 hrs & > 300v auto cut and re-start feature with warranty minimum 5 years. as per s.i.1424 B/S CAT AAA PWD Schedule |
| 13 | Supply and fixing of 25 sqmm AL. Connection lugs as per s.i.504 e |
| 14 | Supply and Burrying of 75 mm dia 3 mtr. long Electrod casted with maintenance free, conductive concrete, non corrosive mixture (Ultra low resistive carbon 0.001 ohm/mtr) in the ratio of 3:1:1 (macronite : cement: water) on M.S. Rod with hole ( 16mm diameter x3 mtr.) will be vertically installed for earthing with 1 mtr G.I. strip (25 mm x 2.5mm) connected with SS nut bolt. the earth electrode will be installed into the 100 mm pit up to 3000 mm depth normal soil will be used as backfill material. Make : as approve in U.P.P.W.D. & C.P.R.I. Certified as per s.i. no. 729(C) |
| 15 | S/F of 100 Amp. 415 v matel clad T.P.N.rewireable type switch fuse unit on angle iron bracket complete in all respect (si 328)cat- B |
| 16 | S/F of Sign Board i/c all |
| 17 | Deduction Old Pole |
| 18 | After Deductions |
| 19 | GST 18 % Please Enable Macros to View BoQ information |
