|
| 1 | Nagar Palika Parishad Bilaspur me Kuon (2Nos) ka Jirndowar karya (As per Estimate) |
| 2 | Earth work Excavation in foundation in ordinary soil including all cost complete |
| 3 | Concrete with 4 cm gauge brick ballast with fine sand of 1.25 FM and cement in 1:2:6 in foundation including supply of labour material T&P etc required for proper completion of work |
| 4 | M-150 brick work in 1:4 cement and coarse sand mortar including all cost of materials labour and t&p etc required for proper completion of work sr no.305 |
| 5 | 12 mm thick plaster in 1:4 cement coarse sand and mortar over brick work including all cost of materials labour and t&p etc required for proper completion of work (sr.no. 584) |
| 6 | P.C.C 1:2:4 with cement, coarse sand & 20 mm gauge stone grit including labour, material T&P incl. all compl. (S.I No 279 (a)) |
| 7 | Concrete with 4 cm gauge stone ballast with fine sand of 2.25 FM and cement in 1:6:12 in foundation including supply labour material T&P incl all compl. (SR NO.279A) |
| 8 | Providing & fixing of interlocking CC tiles 80mm thick M-30 grade over 20 to 40 mm sand layer and joint filled by dry fine sand including all cost of labour t&p etc complete |
| 9 | Finishing of wall with 1 coat of waterproof cement paint weather coat at approved quality including all cost. S.I No ch .no .14, N.I -5 As per Item No.4 |
| 10 | Supply and fixing Of granite stone (as per market rate) |
| 11 | Providing & fixing mild steel iron railing 25 MM G.I. pipe including fabrication labour material t&p etc complete . rate analysis |
| 12 | RCC work 1:1.5:3 with cement approved coarse sand & 20 mm guage stone grit etc including centering & shuttering etc all compl of work SI no 283 |
| 13 | Mild steel or iron work in plain work such as RCC of RB work including bending for proper shape and including supply of steel and its wastage & authorised overlapping etc shall be measured (SI No 504) |
| 14 | Supply and fixing of 7 mtr gi octangal pole of approved make top dia 70 mm bottom dia 130 mm base plate 12 mm having 3mm thick. Single arm bracket on RCC foundation bolts excavation and filling and required T&P complete in all respect |
| 15 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade At a depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and on top as directed by the Engineer-In-charge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Specification: 16 sq. mm 4 core (20a 1.9/2024) |
| 16 | Supply and fixing of LED Street with mandatory driver set having die cast aluminium body with toughened glass/UV stabilized PC cover and lenses suitable for 140 watt to 150 watt confirming to IP 66 and IK 67 and above protection complete in all respect. 16800-18000 system lumen high power LED with lenses all complete. |
| 17 | Supply and fixing following capacity of automatic street light cubicle control panel Painted with anti-corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch, metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. Specification: 40 Ampere TPN SOR no. 807 (if io) |
| 18 | S&F of 6 Amp to 5 Amp DP MCB (10KA) C-Curve (CAT A) Per pole |
| 19 | Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for earthing With its top at least 3 meters below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG G.I. wire in 15mm dia G.I. pipe up to switch board (from apron to switch board the cost of G.I. pipe and G.I. wire will be extra). 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick around etc. as per directions of Engineer-in-charge complete in all respects as per drawing. |
| 20 | Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required, complete in all respect. Note: Earthing G.I. Strip Total Length: wire = 1/2 (716-2018) |
| 21 | Supply and wiring of submains With two nos. of 2.5 sq. mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material, labour and T&P required for proper completion of the work as directed at site by Engineer-in-charge. Specification: 2.5 sq. mm multistrand copper conductor cable Quantity: 1x08 = 08 mtr per Pole Wire (289-218) |
| 22 | Supply and fixing of plain or pin type copper tin plated cable socket (lugs) To the cable leads, insulating with red tape and making connection etc. with all labour and T&P as per direction of the Engineer-in-charge. Quantity: 10x1 Taper Lugs. 504 d-2018 |
| 23 | upply and Fixing of single piece Tri Color LED Strip light in 18 Metre with inbuilt actual Tri Color which should have JP 65 for protection against dust and water and having min 72 LEDs uniformly and wide voltage of 160V-360V with onsite warranty of one Pole to cover 18 Metre strip Tiranga rope Light (2x18mtr) |
| 24 | Construction of information pillar in brick with black granite stone (3'x2.5') Please Enable Macros to View BoQ information |
