|
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared and all as directed including cost of all labour, tools & plants etc., and all other charges complete. |
| 2 | Two coats Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour as directed including cost of all labour, tools & plants etc., and all other charges complete. |
| 3 | for inside Lighthouse Tower at all heights including scaffolding, lead, lift, safety measures, ropes, bosum chair etc. |
| 4 | For inside the buildings (Staff Qtr.) |
| 5 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade as directed including cost of all labour, tools & plants etc., and all other charges complete : New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) ( For outside staff Qtr. & C.wall. The Qty. may vary as per site for C.wall ) |
| 6 | Scrapping/putty/primer |
| 7 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete as directed including cost of all labour, tools & plants etc., and all other charges complete. (For buildings & C.wall) |
| 8 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete as directed including cost of all labour, tools & plants etc., and all other charges complete. (For LH Tower at all heights of SE Paint) |
| 9 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content with water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. (For interior buildings 1st class premium quality as per approved) including cost of all labour, tools & plants etc., and all other charges complete |
| 10 | Applying 1st quality Synthetic Enamel paint of approved brand and manufacture : |
| 11 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. (Paint with oil primer at all heights of outside LH Tower 1st class premium quality as per approved) including cost of all labour, tools & plants etc., and all other charges complete |
| 12 | Applying two or more coats of Synthetic Enamel paint of previously painted surfaces of existing GI Trestle tower of 30m height of approved brand and manufacture (Appcolite Hi-gloss or Gloss enamel / Berger Luxol Hi-gloss enamel) , 1st quality, colour, shade to give an even shade including a coat of primer and apply putty wherever necessary and as includinig scrapping of old paint, cleaning the surface from all dirt, dust and other foreign matter,necessary repairs to scratches, at all heights all as directed at site and as per standard specifications including cost of all materials, labour,tools & plants, scaffolding, bosum chair, safety measures and all other charges etc., complete. (Paint with oil primer for 2 Nos GI Trestle Tower work considered 1069.88 Sqm as Job work. Paint should be 1st class premium quality as per approved) |
| 13 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work:Wooden surfaces as directed including cost of all labour, tools & plants etc., and all other charges complete. |
| 14 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. (for metal surfaces) including cost of all labour, tools & plants etc., and all other charges complete |
| 15 | Replacement of existing damaged GI angles, flats, bolts & Nuts, Pipes, for entire 30m height Trestle Tower all as per direction of Engineer - in - charge and standard specifications, including cost of material, labour, tools & plants, welding as per standards,transportation, lead & lift, making holes, removal of damaged angles/flats/pipes, including applying priming coat of approved steel primer. (for 2Nos GI Trestle Tower work at all heights ) |
| 16 | Polishing on wood work with ready made varnishing polishing of approved brand and manufacture for Old work should give the good look on wooden surfaces after repairing of wooden legs and as including fill the gaps with wood putty, scrapping, cleaning, polishing all as directed at site including cost of all materials, labour, tools & plants and all other charges etc. complete. |
| 17 | One or more coats of French spirit polishing to LH tower wooden main entrance door to give an even shade, minor repais of legs, applying wooden putty wherever necessary, prepare the surface good for french spirit polish with sand paper at all heights and as directed at site including cost of materials, labour charges, tools & plants, safety measures and all other charges etc. complete. |
| 18 | Deismantling/demolision of |
| 19 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) including cost of all labour, tools & plants etc., and all other charges complete |
| 20 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 21 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. In cement mortar including cost of all labour, tools & plants etc., and all other charges complete |
| 22 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (Including IPS Flooring) as directed including cost of all labour, tools & plants etc., and all other charges complete |
| 23 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm as directed including cost of all labour, tools & plants etc., and all other charges complete |
| 24 | Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps : Upto 100 mm diameter as directed including cost of all labour, tools & plants etc., and all other charges complete |
| 25 | Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as directed including cost of all labour, tools & plants etc., and all other charges complete. |
| 26 | Dismantling G.I. pipes (external/internal work) including cutting wall, excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge including cost of all labour, tools & plants etc., and all other charges complete. |
| 27 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved including cost of all labour, tools & plants etc., and all other charges complete. |
| 28 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof as directed including cost of all labour, tools & plants etc., and all other charges complete. |
| 29 | Refixing of existing PVC hand rail cover for internal staircase at all heights of Lighthouse Tower including scrapping & cleaning, required heat process for jointing,gum etc. for complete jointing without movement of PVC cover all as directed including cost of all labour, tools & plants, safety arrangements, scaffolding etc. (PVC cover length 84m for LH Tower job work) |
| 30 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge. |
| 31 | For Dismantling, Providing of Doors/windows as directed including cost of all labour, tools & plants etc., and all other charges complete: |
| 32 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below |
| 33 | Repairs to Door/windows shutters including Fittings & fixtures for free movement and repair the crack place to joint nails (corrugated nails) and apply wood putty where ever necessary, papering for smooth finish all as per standard specifications and as directed at site including cost of all labour, materials, tools & plants,safety measures etc. complete. |
| 34 | Repairs to aluminium door/windows for free movement including replacement of damaged EPDM gasket, nails, screws etc. all as directed at site including cost of all labour, materials, tools & plants,safety measures etc. complete. |
| 35 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood (It should be light brown color and well seasoned.) |
| 36 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately). For 35 mm thick shutters Second class teak wood. |
| 37 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately). For 30 mm thick shutters Second class teak wood |
| 38 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. For Second class teak wood |
| 39 | Renewing glass panes, with wooden fillets wherever necessary: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 40 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) Frame size 45 x 85 mm solid door/ window/ Ceosetory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with M.S hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (Qty. may vary as per requirement) |
| 41 | 35 mm thick factory made Solid panel PVC Door shutter made out of single piece extruded solid PVC profiles, 5 mm (± 0.2mm) thick, having styles & rails (except lock rail) of size 95 mm x 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5mm thick solid PVC lock rail of size 115mm X 35mm out of which 75mm to be flat and 20mm to be tapered at both ends having 15mm solid core in middle of rail section integrally extruded, fixing the styles and rails with the help of solvent and self driven self tapping screws of 125mm X 11mm including providing 5mm single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineer-in-Charge. Decorative finish (wood grained finish). |
| 42 | Replacement with new Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4mm in both directions with wire of dia. 0.50 mm all complete. With 2nd class teak wood beading 62X19 mm. including the cost of materials , labours, tools & plants, removal and all other charges etc., complete. |
| 43 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. (Replacement of damaged MS grills for windows incl. removal) |
| 44 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25 mm with two chromium plated brass brackets fixed withC.P. brass screws and PVC sleeves etc., wherever necessary complete : 25 mm dia |
| 45 | Providing & Fixing of Brass Antique Zinc and Diamond Curtain Finials for Door and Window Accessories 1 inch Rod Curtain Holders for Home Décor (End holders for curtain rods) |
| 46 | Removal & Replacement with new fittings & Fixtures for Door & Window as directed including cost of all labour, tools & plants etc., and all other charges complete |
| 47 | Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 48 | Providing and fixing 200x10 mm aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 49 | Providing and fixing 150x10 mm aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 50 | Providing and fixing 100x10 mm aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 51 | Providing and fixing ISI marked 125x75x4 mm aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: |
| 52 | Providing and fixing ISI marked 75x63x3.2 mm aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: |
| 53 | Providing and fixing 125 mm aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 54 | Providing and fixing 100 mm aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 55 | Providing and fixing 125mm bright finished brass handles with screws etc. complete: |
| 56 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Double rubber stopper |
| 57 | Providing and fixing heavy duty aluminium Aldrop 300 x 16mm |
| 58 | Providing and fixing Double strip (horizontal type) magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. |
| 59 | Providing and fixing bright finished 150mm brass hard drawn hooks and eyes. |
| 60 | Providing and fixing of 2nd class standard 125mm door/Window wooden stopper with ISI marked 100x58x1.90 mm oxidised M.S. pressed butt hinges with necessary screws etc. complete. |
| 61 | Earth work/filling & Drystone packing including cost of all labour, tools & plants etc., and all other charges complete |
| 62 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil with dewatering. |
| 63 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. |
| 64 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
| 65 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift upto1.5 m. All kinds of soil. |
| 66 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. (River Sand) |
| 67 | P & L of Cement Concrete as directed including cost of all labour, tools & plants etc., and all other charges complete |
| 68 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand(zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 69 | Providing and laying in position cement concrete of specified grade - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 70 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 71 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding etc., all complete at plinth & above levels. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 72 | Centering and shuttering for Foundations, footings, bases of columns, etc. for mass concrete |
| 73 | Centering / Shuttering for Shelves (Cast in situ) |
| 74 | Cutting of CC Road upto 300mm width and after laying of pipe line, making good with CC 1:2:4 all as directed including cost of all labour, materials, tools & plants, etc. complete. |
| 75 | Providing & Laying of Brick Work as directed including cost of all labour, tools & plants etc., and all other charges complete |
| 76 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 77 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 78 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement :3 coarse sand) |
| 79 | Plastering work as directed including cost of all labour, tools & plants etc., and all other charges complete |
| 80 | Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In- Charge with C.M (1:4). |
| 81 | Repair works to cracks in masonary / R.C.C. works/ lintels/ beams/ chajjas etc., cutting out cracks in 'V' section , cleaning out wetting, grouting with cement-sand slurry, 1:3( 1 Cement, 3 fine sand) including mixing with water proofing compound as recommended by the manufacture and as directed at site by the engineer in charge including supply of all materials, labours , tools & plants, curing, scaffoldings, and safety measures and all other charges etc.,complete |
| 82 | 6 mm cement plaster of mix : 1:3 (1 cement: 3 fine sand) (This will apply same day of concrete work as per requirement) |
| 83 | 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand) |
| 84 | Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed arrangement andscrews etc. complete : 18mm thick |
| 85 | Tiles flooring as directed including cost of all labour, tools & plants etc., and all other charges complete |
| 86 | Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customized design as per direction of Engineer in charge. The glass mosaic tiles shall be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operations, material and required pattern approved by Engineer-in-charge. (for tree pedestal circular wall work) |
| 87 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size - Size of Tile 800 x 800 mm (For flooring & skirting) |
| 88 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size Size of Tile 600 x 600 mm |
| 89 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete. (Anti skid tiles) |
| 90 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 91 | Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture. (for existing kota stone floor/skirting polishing including acetic acid soap cleaning, removal of damaged putty on joints and replacing at all heights of Lighthouse Tower. ) |
| 92 | Deleted |
| 93 | Water Supply Arrangements as directed including cost of all labour, tools & plants etc., and all other charges complete |
| 94 | P & F Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work 32 mm nominal outer dia. Pipes. (incl. removal of existing pipes) |
| 95 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall 25 mm nominal outer dia .Pipes. (incl. removal of existing pipes) |
| 96 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia .Pipes. (incl. removal of existing pipes) |
| 97 | P & F 32mm Brass Foot valve of approved brand |
| 98 | P & F 32mm brass Non Return valve of approved brand |
| 99 | P & F 25mm brass Non Return valve of approved brand |
| 100 | P & F Extra Heavy Brass Ball Valve (50 mm) 2 inch with handle |
| 101 | P & F Extra Heavy Brass Ball Valve (32 mm) with handle |
| 102 | P & F Extra Heavy Brass Ball Valve (25 mm) 1 inch with handle |
| 103 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.(1000lit x 2nos ) |
| 104 | P & F 2 inch CPVC Plain Tank Nipple Socket |
| 105 | P & F 1 inch CPVC Plain Tank Nipple Socket |
| 106 | Replacement of fittings & fixtures with new in bathroom items all as directed and including cost of all labour, tools & plants, removal and all other charges etc. |
| 107 | P & F Single Piece WC With PP Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories And Accessories Set, Size: 360x730x740 mm, S Trap- 300 mm all as directed including cost of all material , labour, tools & plants, and all other charges etc., complete.(Complete set for Suite comode) |
| 108 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 109 | Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 110 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. |
| 111 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps |
| 112 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 113 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 114 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia |
| 115 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter |
| 116 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore. |
| 117 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : 15mm nominal bore |
| 118 | Providing and fixing Chrome Finish Health Faucet |
| 119 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore |
| 120 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: 15 mm nominal bore. |
| 121 | Providing and fixing 15mm nominal dia PILLAR COCK |
| 122 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length. |
| 123 | P & F connection pipe for Geyser points |
| 124 | Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements. Weighing not less than 106 gms. |
| 125 | P & F of S.C.I. Gully or Nahani grating 100 mm dia (or SS jali) |
| 126 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 127 | Providing and fixing unplasticized Rigid PVC SWR single socketed pipes conforming to IS 13592 Type B (pressure of 6 kg/sqcm) including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion and jointing with approved solvent wherever required as per the direction of the Engineer-in-charge for soil, waste and vent pipes including necessary fittings and accessories complete including cost of all labour, tools & plants etc., and all other charges complete.(Note : 1. All the joints shall be leak proof. 2. The centre line length of pipes shall be measured for the purpose of payment. 3. Floor trap and terminal guard only shall be measured separately for payment). |
| 128 | 110mm |
| 129 | 75 mm dia |
| 130 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 110x110x110 mm |
| 131 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 75x75x75 mm |
| 132 | Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm dia (Floor traps) |
| 133 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design including cost of all labour, tools & plants etc., and all other charges complete: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 134 | Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design as directed including cost of all labour, tools & plants etc., and all other charges complete. |
| 135 | Cleaning of septic tank including soak pit, Inspection chamber, Surface drainage etc. at all heights including, bailing out water by pumping, removal of sludges and residues, disposing the septic tank residues in a pit and disposal of debris within a lead of 50 m, removinig the obstructions in the man hole and sewer lines removing the grass/bush at least 1m wide around the septic tank all as directed including cost of all labour, tools & plants, applying bleaching/water treatment agencies in water tank and septic cleaninig agencies in septic tank, replacing the cover in septic tank, manhole and all other charges all as directed at site including cost of all labour charges, materials, tools & plants, safety measures and all other charges etc., complete. |
| 136 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work class \\"C\\" 40 mm dia. nominal bore with fixing of rollers for flag pedestal as directed including cost of all labour, tools & plants etc., and all other charges complete. |
| 137 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels as directed including cost of all labour, tools & plants etc., and all other charges complete. Granite stone slab colour black, Cherry/ Ruby red Please Enable Macros to View BoQ information |
