|
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 14.90 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared as directed by Engineer-in-Charge. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 All kinds of soil. |
| 3 | Banking excavated earth by mechanical / manual means in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and for all lift : (a)All kinds of soil |
| 4 | Supplying and stacking at site.(a) Good earth |
| 5 | Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : In cement mortar |
| 6 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead |
| 7 | Engaging Hydraulic excavator for various works at site including but not exclusive of clearing jungle, uprooting of rank and heavy vegetation, grass, brush wood, trees, saplings, removal of rubbish/ malba, dressing the ground, excavating earth, etc. complete as per direction of Engineer-in-charge. The rate is inclusive of driver, fuel, lubricants, etc. for 8 hours shift and noting extra shall be payable. |
| 8 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 9 | Demolishing dry brick pitching in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material within 50 metres lead |
| 10 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 11 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 12 | 12 mm cement plaster of mix : (a)1:6 (1 cement: 6 coarse sand) |
| 13 | Finishing walls with Acrylic Smooth exterior paint of required shade :(a)New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 14 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : (a)Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 15 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 16 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a)1:1.5:3 (1 cement : 1.5 coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 17 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form for (a)Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 19 | Centering and shuttering including strutting, propping etc. and removal of form for (a)Lintels, beams, plinth beams, girders,bressumers and cantilevers |
| 20 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :(a) Red sand stone - exposed face fine dressed with rough backing. 30 mm thick |
| 21 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Wedge expansion type Fastener with threaded dia 10 mm |
| 22 | Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete : (a) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 23 | Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete |
| 24 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 25 | Pumping out water from the vacant DDA land, gram sabha land and overflowing water bodies caused by heavy rainfall, river seepage, broken water mains or drains and disposal to nearby s.w. drain or land as directed by Engineer-in-Charge. Note: In this item, The rate is inclusive of cost of services of operating staff, diesel/petrol/kerosene oil, lubricating oil, providing & fixing discharge hose pipe & foot valve hose pipe |
| 26 | Total Amount of DSR(1 to24) = 19752497.99 |
| 27 | Total amount after applying GST Correction Factor @0.973 1,92,19,180.54 Please Enable Macros to View BoQ information |
