|
| 1 | Painting of desert cooler including making surface even, prima paint coat from inside & outside and spray painting of body, fan Motor, blades, etc. with two coat of required shade complete with material and labour. |
| 2 | Supplying and replacement of cooler fan 500 mm (20\\") ISI marked with all necessary material including connection complete of approved as required. |
| 3 | Supplying, erecting and testing of approved make exhaust fan heavy duty with mounting frame, blades AC 230-250 complete connection and including, frame bolt/anchor hole fasteners etc. complete finished and as required. 450mm sweep RPM 900 / 1400 |
| 4 | Supply and replacement of ISI marked cooler submersible water pump complete with all necessary material including connection of approved make as required |
| 5 | Supply, fixing & testing of MPP condenser 440 Volt single phase of approved make as required as per specification condenser 4.00 mfd. 440 volt. |
| 6 | Supply, fixing & testing of MPP condenser 440 Volt single phase of approved make as required as per specification Condenser 6.00 mfd 440Volt |
| 7 | Supply and fixing of multi core round FRLSH PVC insulated copper (flexible)conductor & PVC sheathed cables1100Volts as per IS:694-1990 of approved make (30/0.25 mm) Three core 1.5 sq.mm. |
| 8 | Supply and fixing of approved make 3 pin plug top ISI marked 16Amp 250Volt 3 Pin top |
| 9 | Supply and fixing of approved make electronic dimmer/regulator including connection etc. as required on existing board 650 Watt |
| 10 | Providing & fixing of wood wool / khas pads of normal size desert/ room cooler panels set of 3 nos including fixing wire mesh on pads. |
| 11 | Servicing & overhauling of cooler fanmotor, pump including replacement of distribution, delivery pipes, PVC ebows, painting etc. as reqd. complete with necessary material & labour. |
| 12 | Supply, installation, testing & commissioning of suction / discharge copper pipe line in split air conditioning unit 1.0/1.5 TR/2 TR/3 TR capacity including brazing, nitrile rubber Insulation 6/9 mm thick class 'O', etc complete as required. Copper tube 5/8\\" |
| 13 | Chemical servicing of window /split air conditioning unit 1TR/ 1.5TR/2TR/3TR capacity including cleaning of cooling & condensing units, filters, grills etc & all other parts oiling & greasing of fan motor, testing of A.C unit etc. |
| 14 | Gas charging (R410A /Eco Friendly Green Gas) of window/ split air conditioning unit including flushing of cooling & condensing units with nitrogen gas & rectificaion of leakage, replacement of filter, flair nut etc. if any. 1.5 TR |
| 15 | Gas charging (R410A/Eco Friendly Green Gas) of window/split air conditioning unit including flushing of cooling & condensing units with nitrogen gas & rectification of leakage, replacement of filter, flair nutetc. if any. 2.0 TR |
| 16 | Drain piping :- Providing and fixing of CPVC, 6Kg/cm2 drain water piping with fittings, support and insulated with 6 mm thick closed cell elastomeric nitrile rubber insulation complete as per specification. 20 mm dia ID |
| 17 | Repairing of old damaged front grill of desert cooler with fittings such as air flow guide in all direction upper, lower, right and left fitting with all materials & labour. |
| 18 | Repairing of demaged switch panel of desert cooler replacement of demeged switches and indicators as necessary. |
| 19 | Replacement of cooler body sump tank of suitable size leak proof made of GI sheet with all material and laboure. Size 32''X36''X8'' |
| 20 | Replacement of exhaust fan arm kit with nut. Bolt & washer. ( 12 '' long 4 pc in 1 set) |
| 21 | Providing & Fixing printed circuit boards (PCBs) |
| 22 | Providing & Fixing capacitor 50 mfd Please Enable Macros to View BoQ information |
