Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Facade Lighting Works |
| 2 | SITC of high quality long through mono color wash light, Protection Rating : IP68, complying to BIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" and having CE certification against standard \\"Low Voltage Directive & Protective Equipment - EN 60598-1:2015\\", and \\"Electromagnetic Compatibility Directive - EN 61547: 2009\\", Mounting Structure : Adjustable surface mount yoke arrangements for fixing the lights having the rotation degrees embosed in the die cast. Power consumption : 50W, CCT : 1800K/3000K/4000K/6000K, (as per the design approval), Optics : PMMA with holder, Beam Angle : 15º/25º/45º/60º, Control : ON/OFF, Body : Die casted / extruded aluminium with embossed manufacturer logo, Hot spot and light distribution : Optics Designed to minimize hot spots & fringing in different applications. Power Input : Constant DC 24V with external driver or AC 110-230V, 50Hz, Surge Protection : Inbuilt surge protection in the driver 2KV-4KV(Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection up to IK08, Painting : Chemical 3/7 tank processed treatment before the powder coat black/ash/approved color coat. Fixture will be suitable to operate in a temperature range of 0°C to 50°C, The light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 50,000 burning hours at L70 at 35 degree centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35 micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK07, IP68, NABL Acrediated laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. Power Loop In/Out along with IP68 connector having the length >300mm.(Including TNP & Good for use.). Make (Fittings):- Philips/Havells/Bajaj/K-lite/Leksa/Wipro or equivalent as per direction of E/I. |
| 3 | SITC of high quality long through mono color wash light, Protection Rating : IP68, complying to BIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" and having CE certification against standard \\"Low Voltage Directive & Protective Equipment - EN 60598-1:2015\\", and \\"Electromagnetic Compatibility Directive - EN 61547: 2009\\", Mounting Structure : Adjustable surface mount yoke arrangements for fixing the lights having the rotation degrees embosed in the die cast. Power consumption : 100W, CCT : 1800K/3000K/4000K/6000K, (as per the design approval), Optics : PMMA with holder, Beam Angle : 15º/25º/45º/60º, Control : ON/OFF, Body : Die casted / extruded aluminium with embossed manufacturer logo, Hot spot and light distribution : Optics Designed to minimize hot spots & fringing in different applications. Power Input : Constant DC 24V with external driver or AC 110-230V, 50Hz, Surge Protection : Inbuilt surge protection in the driver 2KV-4KV(Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection up to IK08, Painting : Chemical 3/7 tank processed treatment before the powder coat black/ash/approved color coat. Fixture will be suitable to operate in a temperature range of 0°C to 50°C, The light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 50,000 burning hours at L70 at 35 degree centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35 micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK07, IP68, NABL Acrediated laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. Power Loop In/Out along with IP68 connector having the length >300mm.(Including TNP & Good for use.) Make (Fittings):- Philips/Havells/Bajaj/K-lite/Leksa/Wipro or equivalent as per direction of E/I. Make (Fittings):- Philips/Havells/Bajaj/K-lite/Leksa/Wipro or equivalent as per direction of E/I. |
| 4 | SITC of 17W Mono color Projector Spot light, Protection Rating : IP68, complying to BIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" and having CE certification against standard \\"Low Voltage Directive & Protective Equipment - EN 60598-1:2015\\", and \\"Electromagnetic Compatibility Directive - EN 61547: 2009\\", Mounting Structure : Adjustable wall mount yoke arrangements for fixing the lights. Power consumption : 17W, CCT : 1800/3000/4000/6000K, (as per the design approval) Optics : PMMA with holder, Beam Angle : 15º/25º/45º/60º, Control : ON/OFF, Body : Die casted / extruded aluminium with embossed manufacturer logo, Hot spot and light distribution : Optics Designed to minimize hot spots & fringing in color mixing applications. Power Input : DC 24V(External Driver) or AC 110-230V, 50Hz. Surge Protection : Inbuilt surge protection 2KV-4KV(Additional if required will be added as per the requirement), Glare : Specially designed glare free round shape 360 deg / 3 unit. Focussing area/LED will be kept 90 Deg perpendicular below the glare free optic. Size of the LED optic & glare unit must be equal or +/-2% higher to achieve the maximum intensity and less glare. This additional arrangement can be fixed or removed on the application. Glare free optical design for human viewing angle from a distance within 2-3 Mtr. Toughened transparent glass having the IK protection up to IK05 sealed above the glare free unit. Painting : Chemical 3/7 tank processed treatment before the powder coat black/ash/approved color coat. Fixture will be suitable to operate in a temperature range of 0°C to 50°C , LED life should be at least 50,000 burning hours at L70 at 35 degree centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35 micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK05, IP68, HV Certificates from NABL Acrediated laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. (Including TNP & Good for use.) Make (Fittings):- Philips/Havells/Bajaj/K-lite/Leksa/Wipro or equivalent as per direction of E/I. |
| 5 | SITC of 10W Mono color Projector Spot light, Protection Rating : IP68, complying to BIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" and having CE certification against standard \\"Low Voltage Directive & Protective Equipment - EN 60598-1:2015\\", and \\"Electromagnetic Compatibility Directive - EN 61547: 2009\\", Mounting Structure : Adjustable wall mount yoke arrangements for fixing the lights. Power consumption : 10W, CCT : 1800/3000/4000/6000K, (as per the design approval) Optics : PMMA with holder, Beam Angle : 15º/25º/45º/60º, Control : ON/OFF, Body : Die casted / extruded aluminium with embossed manufacturer logo, Hot spot and light distribution : Optics Designed to minimize hot spots & fringing in color mixing applications. Power Input : DC 24V(External Driver) or AC 110-230V, 50Hz. Surge Protection : Inbuilt surge protection 2KV-4KV(Additional if required will be added as per the requirement), Glare : Specially designed glare free round shape 360 deg / 3 unit. Focussing area/LED will be kept 90 Deg perpendicular below the glare free optic. Size of the LED optic & glare unit must be equal or +/-2% higher to achieve the maximum intensity and less glare. This additional arrangement can be fixed or removed on the application. Glare free optical design for human viewing angle from a distance within 2-3 Mtr. Toughened transparent glass having the IK protection up to IK05 sealed above the glare free unit. Painting : Chemical 3/7 tank processed treatment before the powder coat black/ash/approved color coat. Fixture will be suitable to operate in a temperature range of 0°C to 50°C , LED life should be at least 50,000 burning hours at L70 at 35 degree centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35 micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK05, IP68, HV Certificates from NABL Acrediated laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. (Including TNP & Good for use.) Make (Fittings):- Philips/Havells/Bajaj/K-lite/Leksa/Wipro or equivalent as per direction of E/I. |
| 6 | SITC of high quality long through mono color Linear wash light, Protection Rating : IP68, complying to BIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" and having CE certification against standard \\"Low Voltage Directive & Protective Equipment - EN 60598-1:2015\\", and \\"Electromagnetic Compatibility Directive - EN 61547: 2009\\", Mounting Structure : Adjustable surface mount yoke arrangements for fixing the lights. Power consumption : 36W, CCT : 1800K/3000K/4000K/6000K, (as per the design approval), Optics : PMMA with holder, Beam Angle : 15º/25º/45º/60º, Control : ON/OFF, Body : Die casted / extruded aluminium with embossed manufacturer logo, Hot spot and light distribution : Optics Designed to minimize hot spots & fringing in different applications. Power Input : Constant DC 24V with external driver or AC 110-230V, 50Hz, Surge Protection : Inbuilt surge protection in the driver 2KV-4KV(Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection up to IK07, Painting : Chemical 3/7 tank processed treatment before the powder coat black/ash/approved color coat. Fixture will be suitable to operate in a temperature range of 0°C to 50°C, The light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 50,000 burning hours at L70 at 35 degree centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35 micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK07, IP68, HV Certificates from NABL Acrediated laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. Power Loop In/Out along with IP68 connector having the length >300mm.(Including TNP & Good for use.) Make (Fittings):- Philips/Havells/Bajaj/K-lite/Leksa/Wipro or equivalent as per direction of E/I. |
| 7 | SITC of high quality long through mono color Linear wash light, Protection Rating : IP68, complying to BIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" and having CE certification against standard \\"Low Voltage Directive & Protective Equipment - EN 60598-1:2015\\", and \\"Electromagnetic Compatibility Directive - EN 61547: 2009\\", Mounting Structure : Adjustable surface mount yoke arrangements for fixing the lights. Power consumption : 60W, CCT : 1800K/3000K/4000K/6000K, (as per the design approval), Optics : PMMA with holder, Beam Angle : 15º/25º/45º/60º, Control : ON/OFF, Body : Die casted / extruded aluminium with embossed manufacturer logo, Hot spot and light distribution : Optics Designed to minimize hot spots & fringing in different applications. Power Input : Constant DC 24V with external driver or AC 110-230V, 50Hz, Surge Protection : Inbuilt surge protection in the driver 2KV-4KV(Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection up to IK07, Painting : Chemical 3/7 tank processed treatment before the powder coat black/ash/approved color coat. Fixture will be suitable to operate in a temperature range of 0°C to 50°C, The light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 50,000 burning hours at L70 at 35 degree centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35 micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK07, IP68, HV Certificates from NABL Acrediated laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. Power Loop In/Out along with IP68 connector having the length >300mm.(Including TNP & Good for use.) Make (Fittings):- Philips/Havells/Bajaj/K-lite/Leksa/Wipro or equivalent as per direction of E/I. |
| 8 | SITC of high quality long through mono color Linear wash light, Protection Rating : IP68, complying to BIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" and having CE certification against standard \\"Low Voltage Directive & Protective Equipment - EN 60598-1:2015\\", and \\"Electromagnetic Compatibility Directive - EN 61547: 2009\\", Mounting Structure : Adjustable surface mount yoke arrangements for fixing the lights. Power consumption : 12W, CCT : 1800K/3000K/4000K/6000K, (as per the design approval), Optics : PMMA with holder, Beam Angle : 15º/25º/45º/60º, Control : ON/OFF, Body : Die casted / extruded aluminium with embossed manufacturer logo, Hot spot and light distribution : Optics Designed to minimize hot spots & fringing in different applications. Power Input : Constant DC 24V with external driver or AC 110-230V, 50Hz, Surge Protection : Inbuilt surge protection in the driver 2KV-4KV(Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection up to IK07, Painting : Chemical 3/7 tank processed treatment before the powder coat black/ash/approved color coat. Fixture will be suitable to operate in a temperature range of 0°C to 50°C, The light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition.LED life should be at least 50,000 burning hours at L70 at 35 degree centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35 micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK07, IP68, HV Certificates from NABL Acrediated laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. Power Loop In/Out along with IP68 connector having the length >300mm. (Including TNP & Good for use.) Make (Fittings):- Philips/Havells/Bajaj/K-lite/Leksa/Wipro or equivalent as per direction of E/I. |
| 9 | SITC of high quality long through mono color Slim Linear wash light, Protection Rating : IP68, complying to BIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" and having CE certification against standard \\"Low Voltage Directive & Protective Equipment - EN 60598-1:2015\\", and \\"Electromagnetic Compatibility Directive - EN 61547: 2009\\", Mounting Structure : Adjustable surface mount yoke arrangements for fixing the lights. Power consumption : 15W, CCT : 1800K/3000K/4000K/6000K, (as per the design approval), Optics : PMMA with holder, Beam Angle : 15º/25º/45º/60º, Control : ON/OFF, Body : Die casted / extruded aluminium with embossed manufacturer logo, Hot spot and light distribution : Optics Designed to minimize hot spots & fringing in different applications. Power Input : Constant DC 24V with external driver or AC 110-230V, 50Hz, Surge Protection : Inbuilt surge protection in the driver 2KV-4KV(Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection up to IK07, Painting : Chemical 3/7 tank processed treatment before the powder coat black/ash/approved color coat. Fixture will be suitable to operate in a temperature range of 0°C to 50°C, The light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 50,000 burning hours at L70 at 35 degree centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35 micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK07, IP68, HV Certificates from NABL Acrediated laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. Power Loop In/Out along with IP68 connector having the length >300mm. Make (Fittings):- Philips/Havells/Bajaj/K-lite/Leksa/Wipro or equivalent as per direction of E/I. |
| 10 | SITC of high quality Mono Color Neon Flexible light, Protection Rating : IP68, Mounting Structure : Adjustable wall mount SS clips for fixing the lights. Power consumption : 10W, CCT : 3000k, (as per the design approval) Beam Angle : 120º, Power Input : DC 24V with external driver or AC 110-230V, 50Hz, Surge Protection : Inbuilt surge protection 2KV-4KV(Additional if required will be added as per the requirement), Fixture will be suitable to operate in a temperature range of 0°C to 50°C , LED life time should be at least 50,000 burning hours at L70 at 35 degree centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. LED Makes should be CREE, LumilLED, Osram, Seoul, Epistar, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. Make (Fittings):- Philips/Havells/Bajaj/K-lite/Leksa/Wipro or equivalent as per direction of E/I. |
| 11 | SITC of high quality long through multi colour with RGBW 4in1 LED, DMX-RDM based wash light, Protection Rating: IP68, complying to BIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" and having CE certification against standard \\"Low Voltage Directive & Protective Equipment - EN 60598 (Part 2/Sec 1):2020\\", and \\"Electromagnetic Compatibility Directive - EN 61547:2020\\", Mounting Structure: Adjustable surface mount yoke arrangements for fixing the lights having the rotation degrees embossed in the die cast. Power consumption: 50W, CCT: RGBW (6000K -7000K) (as per the design approval), Optics: PMMA/PC Lens with separate holder, Beam Angle: 25°/45°/60°(as per the design approval), Luminous Efficacy must be Min : 55Lm/W, Body: Die casted/ extruded aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hot spot and light distribution: Optics Designed to minimize hot spots & fringing in colour mixing applications. Luminaire shall be capable of producing dynamic colour-changing light with 16.7million colours and it shall support control via DMX, Ethernet, and Remote Device Management (RDM) for enhanced configuration and management. The luminaire should offer channel options of 8/ 4 channels by using a Programming kit, with these channels providing control for effects and colour transitions like 4 colour 4 channels, Master, Jump, strobe, Macro function and speed in the rest 4 channels as per the requirement. Additionally, it shall feature auto colour synchronization functionality, allowing seamless operation if there is a loss of DMX signal/ with loop in loop out. Power Input: DC 24V External Group Driver or AC 110-230V, 50Hz, Surge Protection: Inbuilt surge protection in the driver 2KV-4KV (Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection: IK08 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/Grey/approved colour coat. Fixture will be suitable to operate in a temperature range of -10°C to +60°C, the light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 50,000 burning hours at L70.(Including TNP & Good for use.) at 50 degrees centigrade LM80 to be provided. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35-micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK08, HV & IP68 Certificates from NABL Accredited laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with LM80 report from as international testing Laboratory. Power & DMX Loop In/Out along with moulded connector having the length >300mm. Certifications: CE, RoHS, BIS. Make (Fittings):- Philips/Havells/Bajaj/K-lite/Leksa/Wipro or equivalent as per direction of E/I. |
| 12 | SITC of high quality long through Multi colour with RGBW 4in1 LED, DMX-RDM based linear wash light, Protection Rating: IP68, complying to BIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" and having CE certification against standard \\"Low Voltage Directive & Protective Equipment - EN 60598 (Part 2/Sec 1):2020\\", and \\"Electromagnetic Compatibility Directive - EN 61547:2020\\", Mounting Structure: Adjustable surface mount yoke arrangements in the die cast for fixing. Power consumption: 50W, CCT: RGBW (6000K - 7000K) (as per the design approval), Optics: PMMA/PC Lens with holder, Beam Angle: 25°/45°/60°(as per the design approval), Luminous Efficacy must be Min : 55Lm/W, Body: Die casted/ extruded aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hot spot and light distribution: Optics Designed to minimize hot spots & fringing in colour mixing applications. Luminaire shall be capable of producing dynamic colour-changing light with 16.7million colours and it shall support control via DMX, Ethernet, and Remote Device Management (RDM) for enhanced configuration and management. The luminaire should offer channel options of 8/ 4 channels by using a Programming kit, with these channels providing control for effects and colour transitions like 4 colour 4 channels, Master, Jump/ strobe, Micro function and speed. Additionally, it shall feature auto colour synchronization functionality, allowing seamless operation if there is a loss of DMX signal/ with loop in loop out. Power Input: DC 24V External Group Driver or AC 110-230V, 50Hz, Surge Protection: Inbuilt surge protection in the driver 2KV-4KV (Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection: IK07 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/Grey/approved colour coat. Fixture will be suitable to operate in a temperature range of -10°C to +60°C, the light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 50,000 burning hours at L70 at 50 degrees centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35-micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK07, HV & IP68 Certificates from NABL Accredited laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. Power & DMX Loop In/Out along with moulded connector having the length >300mm. Certifications: CE, RoHS, BIS.(Including TNP & Good for use.) Make (Fittings):- Philips/Havells/Bajaj/K-lite/Leksa/Wipro or equivalent as per direction of E/I. |
| 13 | SITC of high quality Multi Color Neon Flexible light, Protection Rating : IP68, Mounting Structure : Adjustable wall mount aluminium profile for fixing the lights. Power consumption : 12W, CCT : RGB/RGBW, (as per the design approval) Beam Angle : 120º, Control : DmX512 Channel : 4 CH, Power Input : DC 24V with external driver, Surge Protection : Inbuilt surge protection 2KV-4KV(Additional if required will be added as per the requirement), Fixture will be suitable to operate in a temperature range of 0°C to 50°C , LED life time should be at least 50,000 burning hours at L70 at 35 degree centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. LED Makes should be CREE, LumilLED, Osram, Seoul, Epistar, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. (Including TNP & Good for use.) Make (Fittings):- Philips/Havells/Bajaj/K-lite/Leksa/Wipro or equivalent as per direction of E/I. |
| 14 | SITC of Aluminium Profile for Neon flex. (Including TNP & Good for use.) |
| 15 | SITC of 3W Step light Material: die-cast aluminium, GS driver, CCT: 3000K, Product Size: 40*185*44, Cut Size: 33*170*41, Bottom box included, CRI:80, Lumens: 80 LM/W , Beam angle: 10 °, Voltage: 85-265V/50Hz, IP68 .(Including TNP & Good for use.) Make (Fittings):- Philips/Havells/Bajaj/K-lite/Leksa/Wipro or equivalent as per direction of E/I. |
| 16 | SITC of DC power driver for the above Lights, Power:200W, Input:AC110-240VAC,50Hz, Output:DC12/24V,Protection rating,IP68,Surge protection:LL4KV,LE6KV(IncludingTNP&Good for use.) |
| 17 | SITC of high quality DMX decoder, Power Input : DC 24V, Input Signal: DMX512, 8 channel, Addressing: You can manually set DMX addresses using DIP switches or digital displays, Smooth Dimming: Enables 0–100% dimming and dynamic effects like fading or color chasing. IP Rating: IP20.(Including TNP & Good for use.) |
| 18 | SITC of IP driver box made up of PVC / UPVC for the internal terminations and external outgoing connecting points, with required PVC / brass glands, Optional suitable size MCB fitted for control outgoing circuits.(Including TNP & Good for use.) |
| 19 | SITC of PVC insulated multi core electrical un armored flexible 5C x 0.5Sq mm power cable having less electrical losses.(Including TNP & Good for use.) |
| 20 | SITC of PVC insulated multi core electrical un armored flexible 3C x 1.5Sq mm power cable having less electrical losses. This PVC insulated and round sheathed wire features a bright multi strands copper conductors and it supports voltage grade up to 1100V.(Including TNP & Good for use.) |
| 21 | SITC of PVC insulated multi core electrical un armored flexible 3C x 2.5Sq mm power cable having less electrical losses. This PVC insulated and round sheathed wire features a bright multi strands copper conductors and it supports voltage grade up to 1100V.(Including TNP & Good for use.) |
| 22 | SITC of 5 core DMX cable comprises twisted pairs with shield support for carrying of data. DMX512 cable is used for connecting all light consoles that use DMX 512 standard data transmission.(Including TNP & Good for use.) |
| 23 | SITC of PVC insulated multi core electrical armored flexible 4C x 10Sq mm power cable having less electrical losses. This PVC insulated and round sheathed wire features a bright multi strands aluminium conductors and it supports voltage grade up to 1100V.(Including TNP & Good for use.) |
| 24 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. for both power and Dmx. (As per actuals depending upon the site condition). 63 mm dia (OD-63 mm & ID-51 mm nominal)DSR-2025(1.21.2) |
| 25 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.(Including TNP & Good for use.) 25mm DSR-2025(1.21.2) |
| 26 | Earth Excavation Work for cable laying 90cm below ground level on proper sand bed(depth may vary as per actual site condition and as per direction of E/I). |
| 27 | SITC of Main Power Distribution Board made up of MS Sheet metal fabricated housing black powder coated and ivery connectors for the internal terminations and external outgoing connecting points, fibre / brass glands of suitable size fitted MCB control for outgoing circuits. Timer with required contactor for auto switching. Power panel suitable for indoor/outdoor applicable and floor mount / wall mount options.- 3 Nos of 32A TPN MCB Outgoing MCB's.- 1No of 100A TPN Incoming MCCB.(Including TNP & Good for use.) |
| 28 | SITC of Sub Power Distribution Board made up of MS Sheet metal fabricated housing black powder coated and ivery connectors for the internal terminations and external outgoing connecting points, fibre / brass glands of suitable size fitted MCB control for outgoing circuits. Timer with required contactor for auto switching. Power panel suitable for indoor/outdoor applicable and floor mount / wall mount options.- 12 Nos of 6/10A SP Outgoing MCB's.- 1No of 32A TPN Incoming MCCB.(Including TNP & Good for use.) |
| 29 | Providing earthing with galvanised iron earth plate, Earthing pipe, GI earthing wire, complete with all materials, testing and recording.(Including TNP & Good for use.) |
| 30 | Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. DSR-2025(5.2) |
| 31 | Earthing with G.I. earth plate 600 mm X 600 mm X 6mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. with charcoal/ coke and salt as required. DSR-2025(5.4) |
| 32 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50metre below ground as strip earth electrode, including connection/terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) DSR-2025(5.9) |
| 33 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.DSR-2025(5.12) |
| 34 | SITC of 5 pin XLR Male connectors having 5 pole cable connector, Male/Female connector with improved latch, cage type contacts, \\"solder stop\\" for easy soldering, and additional ground contact for best contact integrity between chassis and cable connector. More durable housing for maximum reliability.(Including TNP & Good for use.)DSR-2025(19.9.3) |
| 35 | SITC of 5 pin XLR Female connectors having 5 pole cable connector, Male/Female connector with improved latch, cage type contacts, \\"solder stop\\" for easy soldering, and additional ground contact for best contact integrity between chassis and cable connector. More durable housing for maximum reliability.(Including TNP & Good for use.)DSR-2025(19.9.3) |
| 36 | SITC of DMX isolator or splitter provides Isolated optical DMX splitter provides 8 outputs from a 1 input and Input voltage: AC 110 to 220 V, 50 Hz, Product features: Group 1 & group 8 DMX signal change.(Including TNP & Good for use.) |
| 37 | SITC of Din Rail Mount DMX controller can be used to control a wide variety of different DMX systems- from RGB/RGBW to more advanced moving and color mixing luminaires, 512 DmX channels in live mode (computer), stand alone mode with 1 area and 20 scenes, Mac OSx 10.6/10.7/10.8 - Windows XP/VISTA/SEVEN/8 32/64 bits and USB 2.0, XLR3, mini USB, Power From 5V to 5.5V DC (AC/DC adapter in option.(Including TNP & Good for use.) |
| 38 | Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete. ( 6-1-1 ) ( 2022-23 )(Including TNP & Good for use.) |
| 39 | SITC of additional accessories for installing all required lights as per the final drawing/site condition consisting of clamps, brackets, angles, joints, hardware's like fasteners, nut & bolts etc.,(with all required materials & TNP etc.) as per direction of E/I. |
| 40 | Civil Works |
| 41 | Sub-Head : Earth Work |
| 42 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30cm in depth,1.5m in width as well as 10 sqm on plan)including getting out and disposal of excavated earth,lead upto 50m and for all lift,as directed by Engineer-in-Charge.(Civil DSR 2023 SI No. 2.6) |
| 43 | All kinds of soil (Civil DSR 2023 SI No. 2.6.1) |
| 44 | Excavating trenches of required width for pipes,cables,etc including excavation for sockets, and dressing of getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc.and disposing of surplus excavated soil as directed, within a lead of 50 m : |
| 45 | All kinds of soil (Civil DSR 2023 SI No. 2.10.1) |
| 46 | Pipes, cables etc,not exceeding 80 mm dia. (Civil DSR 2023 SI No. 2.10.1.1) |
| 47 | Pipes,cablesetc.exceeding 80mm dia.but not exceeding 300 mm dia. (Civil DSR 2023 SI No. 2.10.1.2) |
| 48 | Excavating, supplying and filling of local earth (including royalty)by mechanical transport upto a lead of 5km, also including ramming and watering of the earth in layers not exceeding 20cm in trenches, plinth, sides of foundation etc., complete. (Civil DSR 2023 SI No. 2.25A) |
| 49 | Sub-Head : Concrete Work |
| 50 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (Civil DSR 2023 SI No. 4.1) |
| 51 | 1:4:8 (1 Cement:4 coarses and (zone-III) derived from natural sources :8 graded stone aggregate 40mm nominal size derived from natural sources). (Civil DSR 2023 SI No. 4.1.8) |
| 52 | Sub-Head : Masonry Work |
| 53 | Brick work with common burnt clay F.P.S. (nonmodular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : (Civil DSR 2023 SI No. 6.4) |
| 54 | Cement mortar 1:6 (1 cement : 6 coarse sand) (Civil DSR 2023 SI No. 6.4.2) |
| 55 | Sub-Head : Stone Work |
| 56 | Stone work, plain in copings, cornices, string courses and plinth courses, upto 75mm thick in Cement mortar1:6 (1 cement:6 coarse sand) including pointing withwhite cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade (Civil DSR 2023 SI No. 7.32) |
| 57 | White sand stone (Civil DSR 2023 SI No. 7.32.2) |
| 58 | Providing and fixing stone jali 40mm thick through out incement mortar 1:3 (1 cement:3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement :2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc. (Civil DSR 2023 SI No. 7.33) |
| 59 | White sand stone (Civil DSR 2023 SI No. 7.33.2) |
| 60 | Stone tile work for wall lining upto 10m height with special adhesive over 12mm thick bed of cement mortar 1:3 (1 cement:3 coarse sand) including pointing in white cement with an admixture of pigment to match the stone shade. (Civil DSR 2023 SI No. 7.38) |
| 61 | 8mm thick (mirror polished and machine cut edge) (Civil DSR 2023 SI No. 7.38.1) |
| 62 | Granite stone of any colour and shade. (Civil DSR 2023 SI No. 7.38.1.1) |
| 63 | Sub-Head : Cladding Work |
| 64 | Providing and fixing expansion hold fasteners on C.C./R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. (Civil DSR 2023 SI No. 8.8) |
| 65 | Wedge expansion type (Civil DSR 2023 SI No. 8.8.1) |
| 66 | Fastener with threaded dia 12 mm (Civil DSR 2023 SI No. 8.8.1.3) |
| 67 | Stonework (machine cut edges) for wall lining etc. (veneer work) upto 10metre height, backing filled with a grout of average 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade :(To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : Civil DSR 2023 SI No. 8.14) |
| 68 | Red sand stone-Exposed face machine cut and table rubbed with rough backing. (Civil DSR 2023 SI No. 8.14.3) |
| 69 | 40 mm thick (Civil DSR 2023 SI No. 8.14.3.4) |
| 70 | White sand stone-Exposed face machine cut and table rubbed with rough backing. (Civil DSR 2023 SI No. 8.14.4) |
| 71 | 40 mm thick (Civil DSR 2023 SI No. 8.14.4.4) |
| 72 | Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement:2 coarse sand), including making the necessary chases in stone andholes in walls wherever required. (Civil DSR 2023 SI No. 8.15) |
| 73 | Sub-Head : Steel Work |
| 74 | Steel work in builtup tubular (round,squareor rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and apply in gap rimingcoat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (Civil DSR 2023 SI No. 10.16) |
| 75 | Hot finished welded type tubes. (Civil DSR 2023 SI No. 10.16.1) |
| 76 | Steel work welded in builtup sections/framedwork, including cutting,hoisting,fixing In position and applying a priming coat of approved steel primer using structural steel etc. as required. (Civil DSR 2023 SI No. 10.25) |
| 77 | In stringers,treads,landingsetc.ofstaircases,including use of chequered plate wherever required, all complete. (Civil DSR 2023 SI No. 10.25.1) |
| 78 | In gratings,frames,guardbar,ladder,railings,brackets, gates and similar works. (Civil DSR 2023 SI No. 10.25.2) |
| 79 | Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10mm dia double threaded 6.8 grade (yieldstrength 480 N/mm2), counter sunkhead, comprising of 10mm dia polyamide PA6 grade sleeve, includingdrilling of hole in frame, concrete/masonry,etc.as per direction of Engineer-in-charge. (Civil DSR 2023 SI No. 10.27) |
| 80 | 10 x 80 mm (Civil DSR 2023 SI No. 10.27.2) |
| 81 | 10 x 120 mm (Civil DSR 2023 SI No. 10.27.3) |
| 82 | Providing and fixing stainless steel (Grade304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing andmaking curvature(whereverrequired) and fitting the same with necessary stainless steel nuts and bolts complete,i/c fixing the railing with necessary accessories & stainless steel dash fasteners ,stainless steel bolts etc., of required size, on thetop of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). (Civil DSR 2023 SI No. 10.28) |
| 83 | Sub-Head : Flooring |
| 84 | Cement concrete flooring 1:2:4 (1cement:2coarse sand:4graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. (Civil DSR 2023 SI No. 11.3) |
| 85 | 40 mm thick with 20 mm nominal size stone aggregate (Civil DSR 2023 SI No. 11.3.1) |
| 86 | Kota stones lab flooring over 20mm(average)thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : (Civil DSR 2023 SI No. 11.26) |
| 87 | 25 mm thick. (Civil DSR 2023 SI No. 11.26.1) |
| 88 | Kota stones labs 20mm thick in risers of steps, skirting, dado and pillars laid on 12mm (average) thick cement mortar 1:3 (1 cement 3coarse sand)and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. (Civil DSR 2023 SI No. 11.27) |
| 89 | 40mm thick fine dressed stone flooring over 20mm (average) thick base of cement mortar 1:5(1cement:5 coarse sand) with joints finished flush. (Civil DSR 2023 SI No. 11.28) |
| 90 | Red sand stone (Civil DSR 2023 SI No. 11.28.1) |
| 91 | White sand stone (Civil DSR 2023 SI No. 11.28.2) |
| 92 | Sub-Head : Roofing |
| 93 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10mm gap for thermal expansion, (i)Single socketed pipes. (Civil DSR 2023 SI No. 12.41) |
| 94 | 75 mm diameter (Civil DSR 2023 SI No. 12.41.1) |
| 95 | 110 mm diameter (Civil DSR 2023 SI No. 12.41.2) |
| 96 | Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion. (Civil DSR 2023 SI No. 12.42) |
| 97 | Coupler (Civil DSR 2023 SI No. 12.42.1) |
| 98 | 75mm (Civil DSR 2023 SI No. 12.42.1.1) |
| 99 | 110mm (Civil DSR 2023 SI No. 12.42.1.2) |
| 100 | Single pushfit Coupler : (Civil DSR 2023 SI No. 12.42.2) |
| 101 | 75mm (Civil DSR 2023 SI No. 12.42.2.1) |
| 102 | 110mm (Civil DSR 2023 SI No. 12.42.2.2) |
| 103 | Single tee with door (Civil DSR 2023 SI No. 12.42.3) |
| 104 | 75x75x75 mm (Civil DSR 2023 SI No. 12.42.3.1) |
| 105 | 110x110x110 mm (Civil DSR 2023 SI No. 12.42.3.2) |
| 106 | Single tee without door (Civil DSR 2023 SI No. 12.42.4) |
| 107 | 75x75x75 mm (Civil DSR 2023 SI No. 12.42.4.1) |
| 108 | 110x110x110 mm (Civil DSR 2023 SI No. 12.42.4.2) |
| 109 | Bend 87.5° (Civil DSR 2023 SI No. 12.42.5) |
| 110 | 75 mm bend (Civil DSR 2023 SI No. 12.42.5.1) |
| 111 | 110 mm bend (Civil DSR 2023 SI No. 12.42.5.2) |
| 112 | Shoe (Plain) (Civil DSR 2023 SI No. 12.42.6) |
| 113 | 75 mm Shoe (Civil DSR 2023 SI No. 12.42.6.1) |
| 114 | 110 mm Shoe (Civil DSR 2023 SI No. 12.42.6.2) |
| 115 | Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length ,including cutting brick work and fixing in cement mortar 1:4 (1cement:4 coarse sand) and making good the wall etc. complete. (Civil DSR 2023 SI No. 12.43) |
| 116 | 75 mm (Civil DSR 2023 SI No. 12.43.1) |
| 117 | 110 mm (Civil DSR 2023 SI No. 12.43.2) |
| 118 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15cm diameter and weighing not less than 440 grams. (Civil DSR 2023 SI No. 12.44) |
| 119 | Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS:277, in 240m pasteel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18microns. Sheet should have protective guard film of 25microns minimum to avoid scratches during transportation and should be supplied in single length upto 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/seIf tapping screws of size(5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafter sand trusses and including cutting to size and shape wherever required. (Civil DSR 2023 SI No. 12.5) |
| 120 | Sub-Head : Finishing |
| 121 | 12 mm Cement plaster mix (Civil DSR 2023 SI No. 13.4) |
| 122 | 1:6 (1 cement: 6 coarse sand) (Civil DSR 2023 SI No. 13.4.2) |
| 123 | 15mm cement plaster on the rough side of single or half brick wall of mix : (Civil DSR 2023 SI No. 13.5) |
| 124 | 1:6 (1 cement: 6 coarse sand) (Civil DSR 2023 SI No. 13.5.2) |
| 125 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface top repare the surface even and smooth complete. (Civil DSR 2023 SI No. 13.8) |
| 126 | Removing dry or oil bound distemper, waterproofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (Civil DSR 2023 SI No. 13.91) |
| 127 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : (Civil DSR 2023 SI No. 13.98) |
| 128 | One or more coats on old work. (Civil DSR 2023 SI No. 13.98.1) |
| 129 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : (Civil DSR 2023 SI No. 13.99) |
| 130 | One or more coats on old work. (Civil DSR 2023 SI No. 13.99.1) |
| 131 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: (Civil DSR 2023 SI No. 13.62) |
| 132 | Two or more coats on new work over an undercoat of suitable shade with ordinary paint of approved brand and manufacture. (Civil DSR 2023 SI No. 13.62.1) |
| 133 | Sub-Head : Dismantling and Demolishing |
| 134 | Dismantling tile work in floor sand roofs laid in cement mortar including stacking material within 50 metres lead. (Civil DSR 2023 SI No. 15.23) |
| 135 | For thickness of tiles 10 mm to 25 mm (Civil DSR 2023 SI No. 15.23.1) |
| 136 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (Civil DSR 2023 SI No. 15.56) |
| 137 | Disposal of building rubbish/malba/similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50m initial lead, for all leads including all lifts involved. (Civil DSR 2023 SI No. 15.60) |
| 138 | Sub-Head : Aluminium Work |
| 139 | Providing and fixing aluminium work for doors, windows, ventilator sand partitions with extruded builtup standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminiums ections shall be smooth,rustfree,straight,mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing,paneling and dash fasteners to be paid for separately) : (Civil DSR 2023 SI No. 21.1) |
| 140 | For fixed portion (Civil DSR 2023 SI No. 21.1.1) |
| 141 | Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC 15) (Civil DSR 2023 SI No. 21.1.1.1) |
| 142 | Sub-Head : Conservation of Heritage Buildings |
| 143 | Providing and fixing double scaffolding system (cuplock type)on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5metre centre to centre, horizontal & vertical tubes joint with cup&lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/or pointing and/or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible ,for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. (Civil DSR 2023 SI No. 24.2) |
| 144 | Note:-(1)The elevational area of the scaffolding shall be measured for payment purpose |
| 145 | (2)The payment will be made once only forexecution of all items for such works. |
| 146 | Applying breathable, non-reactive, antifungal, and water repellant Silane/Siloxane chemical as approved by Archaeological Survey of India/Engineer-in-charge, of approved brandand manufacture, diluted with solvent mineral Turpentine oil in the ratio of 1:12 (One part of approved chemical : 12 Part of Turpentine oil), on the existings and stone masonry surface with two or more coats to give uniform application of chemical on the surface, all complete as per direction of Engineer-In-charge (The rate is inclusive of all materials & labours involved except scaffolding). (Civil DSR 2023 SI No. 24.8) Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
