|
| 1 | Construction of Embankment with Material Obtained from Borrow Pits Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 (Including all taxes, labour cess but Excluding GST) |
| 2 | Granular Sub-base with Well Graded Material (Table 400.1) (A) By Mix in Place Method Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (i) For Grading I Material (Including cost of labour cess but Excluding GST) |
| 3 | WBM Grading 2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405. (A) By Manual Means (Including cost of bitumen all taxes, labour cess but Excluding GST) |
| 4 | WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. (A) By Manual Means.(Including cost of labour cess but Excluding GST) |
| 5 | Providing and appying prime coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate 0.70 kg/Sqm using mechanical means as per Technical specification claue 502 .(Including cost of Bitumen Emulsion all taxes, labour cess but Excluding GST) |
| 6 | Providing and applying tack coat with bitumen VG-10 pressure distributor at the rate of 0.35 kg. per sqm on the prepared bituminous / granular surface cleaned with hydrulic broom as per Techinical Specification No. 503 (Including cost of bitumen all taxes, labour cess but Excluding GST) |
| 7 | Providing laying and rolling of open graded premix carpet of 20mm thickness composed of 13.2mm and 11.2mm dalla aggregate either using 80/100 penetration grade bitumen VG-10 @1.46kg per sqm. To required line,grade and level to serve as wearing course on a previously prepared base,including mixing by mixol,laying and rolling with a three wheel 80-100 KN static roller capacity.as per technical specification clause 508.(Including cost of bitumen all taxes, labour cess but Excluding GST) |
| 8 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C, as per Technical Specification Clause 510.(Including cost of bitumen all taxes, labour cess but Excluding GST) |
| 9 | Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1 (Including all taxes, labour cess but Excluding GST) |
| 10 | Brick edging on both sides of roads of Straight over burnt brick class 275 ( 8cm (3\\") wide & 12 cm (4.50\\") deep laid with mud mortor including labour & suplly of bricks finished to required templete and in proper alignment and also including dressing & ramming the excavated earth as directed by the E/I. as per SOR. (Including all taxes, labour cess but Excluding GST) |
| 11 | C/O 600 mm dia NP3 Hume pipe culvert 2.5 M long including S/O all material, labour T&P and etc. required for proper completion of work+Fixing jointing as per sor ( as per details of drawing) as per direction of E/I(Including cost of labour cess but Excluding GST) |
| 12 | Excavation for Structures Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. I. Ordinary soil (i) Upto 3 m depth (Including cost of labour cess but Excluding GST) |
| 13 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 I. P.C.C grade M 10 (i) Nominal mix 1:3:6(Including cost all taxes, labour cess but Excluding GST) |
| 14 | Stone masonry work in cement mortar in foundation complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203. II. Coursed rubble masonry (2nd sort) (ii) In 1:4 cement mortar(Including cost of all taxes, labour cess but Excluding GST) |
| 15 | Stone masonry in cement mortar for substructure complete as per drawing & technical specification Clauses 702, 704, 1202 and 1204 Coursed rubble masonry (1st sort) In 1:4 cement mortar(Including cost of all taxes, labour cess but Excluding GST) |
| 16 | Pointing with cement mortar (1:3) on brickwork as per drawing and technical specification Clauses 613.3 and 1204(Including cost of all taxes, labour cess but Excluding GST) |
| 17 | Plastering with cement mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1204 (Including all taxes, labour cess but Excluding GST) |
| 18 | Providing PCC M-20 archtectural coping on the top of wing/return wall. etc. complete as per drawing and techanical spec. clauses 615,710 and 1204.3.11 (Including all taxes, labour cess but Excluding GST) Please Enable Macros to View BoQ information |
