|
| 1 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 110 to 130 Watt. Confirming to IP 66 Protection complete in all respect as per direction by E/I. PWD SOR 2018 Si No. 1424 Cat AAA |
| 2 | Supply and laying of 16 sqmm 4 core aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc as per direction by E/I. PWD SOR 2018 S.I. No. 501-I |
| 3 | Supply and fixing of 4 sqmm 2 core flat twin \\"AL\\" cable complete with labour T&P an dall taxes as per direction by E/I. (PSR) |
| 4 | S/L of 63 mm Dia DWC HDPE Pipe Completewith laying under ground with cartage labour complete in all respect as per direction by E/I.(PSR) |
| 5 | Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect as per direction by E/I. PWD SOR 2018 S.I. No. 641 |
| 6 | Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with double arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect as per direction by E/I. PWD SOR 2018 S.I. No. 642 |
| 7 | Supply & fixing of 8 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 135 mm and base plate 12mm thik) having 3mm thikness with Double arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P complete in all respect as per direction of the E/Ic. PWD SOR 2018 S.I. No. 644 |
| 8 | Supply and fixing of plain or pin type copper tin plated cable socket (lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the E/Ic. PWD SOR 2018 S.I. No. 501-F |
| 9 | S&F of 63 Amp. 415 V metal clad T.P.N. rewireable type switch fuse unit on angle iron bracket complete in all respect as per direction by E/I.S.I. no. 316 PWD SOR 2018 |
| 10 | Making suitable earthing of street light pole with 2.5 M long 20 mm dia M.S Rod with 7/16 SWG GS wire in 15 mm dia 2.0 M long GI pipe duly clamped with 2 nos. of clamps and binding on pole including cost of labour & T&P etc required for proper completion as per direction by E/I (PSR) |
| 11 | S&F of 0.5 Amp to 5 Amp. SP MCB (10KA) C Curve PWD as per direction by E/I SOR 2018 S.I. No. 1001 CAT-B |
| 12 | Numbring of Pole with 6' circule Yellow paint base and number with black paint as per direction by E/I. (PSR) |
| 13 | Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing.Make: As approved in U.P. P.W.D., & C.P.R.I. Certified as per direction by E/I.PWD SOR 2018 SI NO. 725B |
| 14 | Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect as per direction by E/I.PWD SOR 2018 SI NO. 717 Please Enable Macros to View BoQ information |
