|
| 1 | Supply & fixing steel tubular pole 9 Metre long designated 410 SP-32 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect. |
| 2 | Supply & fixing pole earthling of pole by inserting MS Rod 20x2500mm in vertically ground level and connecting the pole with the help of 6 SWG GI wire including cost of all material, men and T&P. in industrial area as per UPSIDA/UPPCL Technical specification. |
| 3 | Supply & fixing 32mm dia,1.50M long MS Bracket pipe with clamp of suitable for fixing street light on ST pole including cost of men and T&P. (Top Bracket Type ) |
| 4 | Supply and fixing of factory wired integral 150 Watt LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 150 Watt. Confirming to IP 66 protection complete in all respect.with surge protection device. Minimum CAT AA with 5 year warrenty against defects,damaged & missing) Make: Cormpton/Philips/Bajaj/wipro. |
| 5 | Supply and fixing of factory wired integral 200Watt LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 200 Watt. Confirming to IP 66 protection complete in all respect.with surge protection device. Minimum CAT AA with 5 year warrenty against defects,damaged & missing) Make: Cormpton/Philips/Bajaj/wipro. |
| 6 | Supply & fixing 70 W LED Street light having die cast aluminium body and diffuser with driver set suitable for 70 Watt confirming to IP 66 protection complete in all respect with surge protection device. Minimum CAT AAA with 5 year warrenty against defects,damaged & missing) Make: Cormpton/Philips/Bajaj/wipro. |
| 7 | Supply & fixing 90 W LED Street light having die cast aluminium body and diffuser with driver set suitable for 90 Watt confirming to IP 66 protection complete in all respect with surge protection device. Minimum CAT AAA with 5 year warrenty against defects,damaged & missing) Make: Cormpton/Philips/Bajaj/wipro. |
| 8 | Supply , Laying & Sagging of of Arial bunch Conductor 3*50+1*35 MM2+1*16 mm2 on pole Complete in all respect including cost of t&p etc |
| 9 | Supply and fixing of Suspention Clamps with J hook complete in all respects including painting with aluminium paint complete in all respect including cost of t&p etc |
| 10 | Supply and fixing of Pearcing/PG Clamps complete in all respects including painting with aluminium paint Complete in all respect including cost of t&p etc |
| 11 | Supply and fixing of Dead end Clamps complete in all respects including painting with aluminium paint Complete in all respect including cost of t&p etc |
| 12 | Supply and fixing of LT Clamps complete in all respects including painting with aluminium paint Complete in all respect including cost of t&p etc |
| 13 | S/F of street light junction box made of SMC material complete with 4 way terminal block, cable gland etc. Complete in all respect including cost of t&p etc |
| 14 | S&F of 40 amp. double pole MCB (10KA cat B) for control panel complete in all respects |
| 15 | Supply & fixing Astronomical time switch L&T/Siemens/C&S or equel brand including cost of connection, material, men and T&P. |
| 16 | S/F of 6 Amp to 32 Amp SP MCB (10KA) B curve |
| 17 | 3x1.5 Sq mm PVC insulated copper cable |
| 18 | S&F of 63 amp. 4 pole MCB (10KA cat B) for control panel complete in all respects |
| 19 | Supply & fixing 3-Phase, 63A 415V Power Contractor ML-3 type or equel for Automatic Street & High Mast Control Panel in cluding cost of Connection, men and T&P. |
| 20 | Supply and replacement of Street Lights LED Driver (compatible with luminaire wattage) |
| 21 | Supply and replacement of SPD FOR LED street Lights (65 to 120 Watt) |
| 22 | Supply and replacement OF LED Lens / Cover glass with gasket (65 to 120 WATT ) |
| 23 | Supply & fixing 40A TPN capacity of automatic street light cubical panel painted with anti corrosive alkali and acid proof paint consisting of digitel/time switch TSO 100 series with ML-3 contactors,HRC fuses/MCB/MCCB/ isolating switch metering instrument & instrument box with CT's etc or as directed . Design & material will be approved by Engineer in charge. |
| 24 | S/B of 40 mm dia x 4.5 mtr. long G.I. pipe vertically for earthing having 12 mm dia. Holes spaced 75 mm apart drilled upto 2 mtr, from the bottom complete with earthing lead of no.6 to 8 SWG GI wire in G.I.pipe upto appron upto switch board 30 cm square box with hinged cover masonary enclosure. Funnel of top, alternate layers of charcoal and salt at least 150 mm thick alround etc. as per direction E/I complete in all respect as per drawing UPPWD Sch. No. 701 |
| 25 | Supply & erection of stay set at 3.5 Metres away from the pole complete with galvanised 19 mm dia x1.80 Metre long stay rod, 30 cm x 30 x 6.3 mm anchor plate, thimble stay clamps, stay insulator, 19 mm 600 mm double screw tightener, 7/3.5 mm G.I. stay wire etc. in 1:3:6 cement concrete complete in all respects. |
| 26 | Cleaning & spray painting of ST bend pole and power ST pole (up to safe height) with one coat of red oxide primer and two coat of alum. paint/PU paint as per direction of Engineer incharge including cost of all material, men and Hydraulic crane, other T&P. (Burger/Nerolac/ Asian make) After Two Year. |
| 27 | Supply and laying of 16 sqmm, 4 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. |
| 28 | Supply & fixing of LED light Strip with driver on street light pole including cost work T&P men and material complete in all respect. The LED strip should be in tri Colour as red, white and green (each colour 6 mtr.respectively.) With 03 Year warranty against defects/damage/missing. |
| 29 | Supply , Sagging & tensoning of overhead line with insulated ACSR weasel conductor including binding etc complete in all respects. |
| 30 | Dismantling & re-grouting of street light/Steel tubler (upto 12 Mtr long) Tilt/sick bend pole in 1:3:6 ratio cement concrete with stone pad including strengthening of pole by providing additional 04 Nos. support of 65x65x6mm or higher size MS angle in suitable length with the help of welding/cutting as per technical specification. |
| 31 | Painting letters (Pole No.) 2.5cm up to 8.0 cm size complete on Street light Pole/Panel/Other electrical properties under UPSIDA including cost of all material, men and T&P |
| 32 | Trimming of tree branch around the street light pole/ST pole/Central Varge for proper illumination & proper disposal of tree branch collecting on trolley or similar moving item including cost of men, trolley, T&P etc. (150 x 3 Year) |
| 33 | Hiring Charge of 80-100 feet expandable street light repairing hydraulic lift, capacity 300 Kg including cost of operator, mounting vehicle and fuel etc. (8 Hrs x 4 day x 36 Month) |
| 34 | Cost of material spares, wire, fuses, small accessories, alum. Lug up to 16 sq.mm, small cable gland, insulation tap,plastic tie, screw, nut & bolts, old cloth, cleaning spray and other small associated required for up-gradation work etc. |
| 35 | Providing operating cum maintenance staff of the entire street light network for routine maintenance of street lighting system, administrative, site office and staff colony etc including dismantling & re fixing of other street lights of UPSIDA with travelling expenses etc. (Electrician 01 nos, helper 02 nos) Please Enable Macros to View BoQ information |
