Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Permanent restoration of Batote Feeder HT |
| 2 | 9 Mtr ST pole (ST-410 SP 33) |
| 3 | MS Cross Arm with top bracket including Clamp |
| 4 | MS Channel x-Arm including Clamps and braces |
| 5 | 11 KV Polymer Composite Pin Insulator |
| 6 | 30 mm Sq ACSR Conductor |
| 7 | 11 KV Polymer Composite Disc Insulator |
| 8 | Galvanized Nuts and Bolts |
| 9 | Danger Plates with Clamps |
| 10 | Anti Climb Device With Clamp |
| 11 | Earthing of Pole |
| 12 | Red Oxide |
| 13 | Aluminnium Paint |
| 14 | Galvanised Stay Set Complete |
| 15 | Permanent restoration of Batote Feeder LT |
| 16 | 8 Mtr ST pole (ST-410 SP 33) |
| 17 | Clamp for Shakle Insulator |
| 18 | 30 mm Sq ACSR Conductor |
| 19 | 16 kN Polymer Shakle Insulator |
| 20 | Galvanized Nuts and Bolts |
| 21 | Danger Plates |
| 22 | Earthing of Pole |
| 23 | Red Oxide |
| 24 | Aluminnium Paint |
| 25 | Galvanized Stay Sey Complete |
| 26 | Permanent restoration of Essential Batote Feeder HT |
| 27 | 9 Mtr ST pole (ST-410 SP 33) |
| 28 | MS Cross Arm with top bracket including Clamp |
| 29 | MS Channel x-Arm including Clamps and braces |
| 30 | 11 KV Polymer Composite Pin Insulator |
| 31 | 30 mm Sq ACSR Conductor |
| 32 | 11 KV Polymer Composite Disc Insulator |
| 33 | Galvanized Nuts and Bolts |
| 34 | Danger Plates with Clamps |
| 35 | Anti Climb Device With Clamp |
| 36 | Earthing of Pole |
| 37 | Red Oxide |
| 38 | Aluminnium Paint |
| 39 | Galvanised Stay Set Complete |
| 40 | Permanent restoration of Essential Batote Feeder LT |
| 41 | 8 Mtr ST pole (ST-410 SP 33) |
| 42 | Clamp for Shakle Insulator |
| 43 | 30 mm Sq ACSR Conductor |
| 44 | 16 kN Polymer Shakle Insulator |
| 45 | Galvanized Nuts and Bolts |
| 46 | Danger Plates |
| 47 | Earthing of Pole |
| 48 | Red Oxide |
| 49 | Aluminnium Paint |
| 50 | Galvanized Stay Sey Complete |
| 51 | Permanent restoration of Sanasar Feeder HT |
| 52 | 9 Mtr ST pole (ST-410 SP 33) |
| 53 | MS Cross Arm with top bracket including Clamp |
| 54 | MS Channel x-Arm including Clamps and braces |
| 55 | 11 KV Polymer Composite Pin Insulator |
| 56 | 30 mm Sq ACSR Conductor |
| 57 | 11 KV Polymer Composite Disc Insulator |
| 58 | Galvanized Nuts and Bolts |
| 59 | Danger Plates with Clamps |
| 60 | Anti Climb Device With Clamp |
| 61 | Earthing of Pole |
| 62 | Red Oxide |
| 63 | Aluminnium Paint |
| 64 | Galvanised Stay Set Complete |
| 65 | Permanent restoration of Sanasar Feeder LT |
| 66 | 8 Mtr ST pole (ST-410 SP 33) |
| 67 | Clamp for Shakle Insulator |
| 68 | 30 mm Sq ACSR Conductor |
| 69 | 16 kN Polymer Shakle Insulator |
| 70 | Galvanized Nuts and Bolts |
| 71 | Danger Plates |
| 72 | Earthing of Pole |
| 73 | Red Oxide |
| 74 | Aluminnium Paint |
| 75 | Galvanized Stay Sey Complete |
| 76 | Permanent restoration of Dharmound siraj Feeder HT |
| 77 | 9 Mtr ST pole (ST-410 SP 33) |
| 78 | MS Cross Arm with top bracket including Clamp |
| 79 | MS Channel x-Arm including Clamps and braces |
| 80 | 11 KV Polymer Composite Pin Insulator |
| 81 | 30 mm Sq ACSR Conductor |
| 82 | 11 KV Polymer Composite Disc Insulator |
| 83 | Galvanized Nuts and Bolts |
| 84 | Danger Plates with Clamps |
| 85 | Anti Climb Device With Clamp |
| 86 | Earthing of Pole |
| 87 | Red Oxide |
| 88 | Aluminnium Paint |
| 89 | Galvanised Stay Set Complete |
| 90 | Permanent restoration of Dharmound siraj Feeder LT |
| 91 | 8 Mtr ST pole (ST-410 SP 33) |
| 92 | Clamp for Shakle Insulator |
| 93 | 30 mm Sq ACSR Conductor |
| 94 | 16 kN Polymer Shakle Insulator |
| 95 | Galvanized Nuts and Bolts |
| 96 | Danger Plates |
| 97 | Earthing of Pole |
| 98 | Red Oxide |
| 99 | Aluminnium Paint |
| 100 | Galvanized Stay Sey Complete |
| 101 | Permanent restoration of Boon bari champa Feeder HT |
| 102 | 9 Mtr ST pole (ST-410 SP 33) |
| 103 | MS Cross Arm with top bracket including Clamp |
| 104 | MS Channel x-Arm including Clamps and braces |
| 105 | 11 KV Polymer Composite Pin Insulator |
| 106 | 30 mm Sq ACSR Conductor |
| 107 | 11 KV Polymer Composite Disc Insulator |
| 108 | Galvanized Nuts and Bolts |
| 109 | Danger Plates with Clamps |
| 110 | Anti Climb Device With Clamp |
| 111 | Earthing of Pole |
| 112 | Red Oxide |
| 113 | Aluminnium Paint |
| 114 | Galvanised Stay Set Complete |
| 115 | Permanent restoration of Boon bari champa Feeder LT |
| 116 | 8 Mtr ST pole (ST-410 SP 33) |
| 117 | Clamp for Shakle Insulator |
| 118 | 30 mm Sq ACSR Conductor |
| 119 | 16 kN Polymer Shakle Insulator |
| 120 | Galvanized Nuts and Bolts |
| 121 | Danger Plates |
| 122 | Earthing of Pole |
| 123 | Red Oxide |
| 124 | Aluminnium Paint |
| 125 | Galvanized Stay Sey Complete |
| 126 | Permanent restoration of Boon bari champa Feeder HT |
| 127 | 9 Mtr ST pole (ST-410 SP 33) |
| 128 | MS Cross Arm with top bracket including Clamp |
| 129 | MS Channel x-Arm including Clamps and braces |
| 130 | 11 KV Polymer Composite Pin Insulator |
| 131 | 30 mm Sq ACSR Conductor |
| 132 | 11 KV Polymer Composite Disc Insulator |
| 133 | Galvanized Nuts and Bolts |
| 134 | Danger Plates with Clamps |
| 135 | Anti Climb Device With Clamp |
| 136 | Earthing of Pole |
| 137 | Red Oxide |
| 138 | Aluminnium Paint |
| 139 | Galvanised Stay Set Complete |
| 140 | Permanent restoration of Patnitop Overhead Feeder LT |
| 141 | 8 Mtr ST pole (ST-410 SP 33) |
| 142 | Clamp for Shakle Insulator |
| 143 | 30 mm Sq ACSR Conductor |
| 144 | 16 kN Polymer Shakle Insulator |
| 145 | Galvanized Nuts and Bolts |
| 146 | Danger Plates |
| 147 | Earthing of Pole |
| 148 | Red Oxide |
| 149 | Aluminnium Paint |
| 150 | Galvanized Stay Sey Complete |
| 151 | Permanent restoration of nathatop rural Feeder HT |
| 152 | 9 Mtr ST pole (ST-410 SP 33) |
| 153 | MS Cross Arm with top bracket including Clamp |
| 154 | MS Channel x-Arm including Clamps and braces |
| 155 | 11 KV Polymer Composite Pin Insulator |
| 156 | 30 mm Sq ACSR Conductor |
| 157 | 11 KV Polymer Composite Disc Insulator |
| 158 | Galvanized Nuts and Bolts |
| 159 | Danger Plates with Clamps |
| 160 | Anti Climb Device With Clamp |
| 161 | Earthing of Pole |
| 162 | Red Oxide |
| 163 | Aluminnium Paint |
| 164 | Galvanised Stay Set Complete |
| 165 | Permanent restoration of nathatop Rural Overhead Feeder LT |
| 166 | 8 Mtr ST pole (ST-410 SP 33) |
| 167 | Clamp for Shakle Insulator |
| 168 | 30 mm Sq ACSR Conductor |
| 169 | 16 kN Polymer Shakle Insulator |
| 170 | Galvanized Nuts and Bolts |
| 171 | Danger Plates |
| 172 | Earthing of Pole |
| 173 | Red Oxide |
| 174 | Aluminnium Paint |
| 175 | Galvanized Stay Sey Complete |
| 176 | Permanent restoration of New Chanderkote Overhead Feeder LT |
| 177 | 8 Mtr ST pole (ST-410 SP 33) |
| 178 | Clamp for Shakle Insulator |
| 179 | 30 mm Sq ACSR Conductor |
| 180 | 16 kN Polymer Shakle Insulator |
| 181 | Galvanized Nuts and Bolts |
| 182 | Danger Plates |
| 183 | Earthing of Pole |
| 184 | Red Oxide |
| 185 | Aluminnium Paint |
| 186 | Galvanized Stay Sey Complete |
| 187 | Permanent restoration of Rajgarh Feeder HT |
| 188 | 9 Mtr ST pole (ST-410 SP 33) |
| 189 | MS Cross Arm with top bracket including Clamp |
| 190 | MS Channel x-Arm including Clamps and braces |
| 191 | 11 KV Polymer Composite Pin Insulator |
| 192 | 30 mm Sq ACSR Conductor |
| 193 | 11 KV Polymer Composite Disc Insulator |
| 194 | Galvanized Nuts and Bolts |
| 195 | Danger Plates with Clamps |
| 196 | Anti Climb Device With Clamp |
| 197 | Earthing of Pole |
| 198 | Red Oxide |
| 199 | Aluminnium Paint |
| 200 | Galvanised Stay Set Complete |
| 201 | Permanent restoration of Rajgarh Feeder LT |
| 202 | 8 Mtr ST pole (ST-410 SP 33) |
| 203 | Clamp for Shakle Insulator |
| 204 | 30 mm Sq ACSR Conductor |
| 205 | 16 kN Polymer Shakle Insulator |
| 206 | Galvanized Nuts and Bolts |
| 207 | Danger Plates |
| 208 | Earthing of Pole |
| 209 | Red Oxide |
| 210 | Aluminnium Paint |
| 211 | Galvanized Stay Sey Complete |
| 212 | Creation of 25 KVA sub-station on Rajgarh feeder for Permanat Restoration |
| 213 | 11/0.433-0.250KV;50Hz), 25 KVA Aluminium Wound Distribution Transformer of latest Energy Efficiency Level-2 (New), IS1180 Part-I; 2014 as per latest upto date amendment |
| 214 | Gapless Surge Arrestor,9 KV ,10 KA ,LA with (polymer/porcelain) housing, Stn. Type |
| 215 | 11 kV G.O AB Switch , 3-phase, 3 pole 200 Amp. Vertical type |
| 216 | 11 kV Horn Gap Fuse Set 3 Phase 3 pole, 200 Amp |
| 217 | 25 mm² Single-Core Cable,1.1kV Grade, PVC Insulated Stranded Conductor FRLS type |
| 218 | 9 Mtr. Long Pole( ST-540 SP33) |
| 219 | 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 220 | GI Channel/Angle/Flat of sizes including clamps |
| 221 | Galvinized Nuts and Bolts. |
| 222 | Earthing of substation --Excavation of earth pit of dia 650 mm &depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 75 mmx10 mm & 50mmx6 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover. |
| 223 | 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 224 | LT Fuse set |
| 225 | Danger Plates with Clamps |
| 226 | Painting of Poles Red Oxide |
| 227 | Painting of Poles Aluminium Paint |
| 228 | Sundry items like aluminium lugs, Jumpers, binding Tape |
| 229 | Creation of 63 KVA sub-station on Rajgarh feeder for Permanat Restoration |
| 230 | 11/0.433-0.250KV;50Hz, 63 Aluminium Wound Distribution Transformer of latest Energy Efficiency Level-2 (New), IS1180 Part-I; 2014 as per latest upto date amendment with externally fitted MCCB with cable box and 4x4 Mtrs. suitable cable of ratings. |
| 231 | Gapless Surge Arrestor,9 KV ,10 KA ,LA with (polymer/porcelain) housing, Stn. Type |
| 232 | 11 kV G.O AB Switch , 3-phase, 3 pole 200 Amp. Vertical type |
| 233 | 11 kV Horn Gap Fuse Set 3 Phase 3 pole, 200 Amp |
| 234 | 70 mm² Single-Core Cable,1.1kV Grade, PVC Insulated Stranded Conductor FRLS type |
| 235 | 9 Mtr. Long Pole( ST-540 SP33) |
| 236 | 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 237 | GI Channel/Angle/Flat of sizes including clamps |
| 238 | Galvinized Nuts and Bolts. |
| 239 | Earthing of substation. |
| 240 | 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 241 | LT Fuse set |
| 242 | Danger Plates with Clamps |
| 243 | Painting of Poles Red Oxide |
| 244 | Painting of Poles Aluminium Paint |
| 245 | Sundry items like aluminium lugs, Jumpers, binding Tape |
| 246 | Permanent restoration of peerah Sawni Feeder HT |
| 247 | 9 Mtr ST pole (ST-410 SP 33) |
| 248 | MS Cross Arm with top bracket including Clamp |
| 249 | MS Channel x-Arm including Clamps and braces |
| 250 | 11 KV Polymer Composite Pin Insulator |
| 251 | 30 mm Sq ACSR Conductor |
| 252 | 11 KV Polymer Composite Disc Insulator |
| 253 | Galvanized Nuts and Bolts |
| 254 | Danger Plates with Clamps |
| 255 | Anti Climb Device With Clamp |
| 256 | Earthing of Pole |
| 257 | Red Oxide |
| 258 | Aluminnium Paint |
| 259 | Galvanised Stay Set Complete |
| 260 | Permanent restoration of Peerah Sawni Feeder LT |
| 261 | 8 Mtr ST pole (ST-410 SP 33) |
| 262 | Clamp for Shakle Insulator |
| 263 | 30 mm Sq ACSR Conductor |
| 264 | 16 kN Polymer Shakle Insulator |
| 265 | Galvanized Nuts and Bolts |
| 266 | Danger Plates |
| 267 | Earthing of Pole |
| 268 | Red Oxide |
| 269 | Aluminnium Paint |
| 270 | Galvanized Stay Sey Complete |
| 271 | Permanent restoration of New Gool Feeder HT |
| 272 | 9 Mtr ST pole (ST-410 SP 33) |
| 273 | MS Cross Arm with top bracket including Clamp |
| 274 | MS Channel x-Arm including Clamps and braces |
| 275 | 11 KV Polymer Composite Pin Insulator |
| 276 | 30 mm Sq ACSR Conductor |
| 277 | 11 KV Polymer Composite Disc Insulator |
| 278 | Galvanized Nuts and Bolts |
| 279 | Danger Plates with Clamps |
| 280 | Anti Climb Device With Clamp |
| 281 | Earthing of Pole |
| 282 | Red Oxide |
| 283 | Aluminnium Paint |
| 284 | Galvanised Stay Set Complete |
| 285 | Permanent restoration of New Gool Feeder LT |
| 286 | 8 Mtr ST pole (ST-410 SP 33) |
| 287 | Clamp for Shakle Insulator |
| 288 | 30 mm Sq ACSR Conductor |
| 289 | 16 kN Polymer Shakle Insulator |
| 290 | Galvanized Nuts and Bolts |
| 291 | Danger Plates |
| 292 | Earthing of Pole |
| 293 | Red Oxide |
| 294 | Aluminnium Paint |
| 295 | Galvanized Stay Sey Complete |
| 296 | Creation of 63 KVA sub-station on new Gool feeder for Permanat Restoration |
| 297 | 11/0.433-0.250KV;50Hz, 63 Aluminium Wound Distribution Transformer of latest Energy Efficiency Level-2 (New), IS1180 Part-I; 2014 as per latest upto date amendment with externally fitted MCCB with cable box and 4x4 Mtrs. suitable cable of ratings. |
| 298 | Gapless Surge Arrestor,9 KV ,10 KA ,LA with (polymer/porcelain) housing, Stn. Type |
| 299 | 11 kV G.O AB Switch , 3-phase, 3 pole 200 Amp. Vertical type |
| 300 | 11 kV Horn Gap Fuse Set 3 Phase 3 pole, 200 Amp |
| 301 | 70 mm² Single-Core Cable,1.1kV Grade, PVC Insulated Stranded Conductor FRLS type |
| 302 | 9 Mtr. Long Pole( ST-540 SP33) |
| 303 | 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 304 | GI Channel/Angle/Flat of sizes including clamps |
| 305 | Galvinized Nuts and Bolts. |
| 306 | Earthing of substation. |
| 307 | 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 308 | LT Fuse set |
| 309 | Danger Plates with Clamps |
| 310 | Painting of Poles Red Oxide |
| 311 | Painting of Poles Aluminium Paint |
| 312 | Sundry items like aluminium lugs, Jumpers, binding Tape |
| 313 | Permanent restoration of Dachan Dheeda Feeder HT |
| 314 | 9 Mtr ST pole (ST-410 SP 33) |
| 315 | MS Cross Arm with top bracket including Clamp |
| 316 | MS Channel x-Arm including Clamps and braces |
| 317 | 11 KV Polymer Composite Pin Insulator |
| 318 | 30 mm Sq ACSR Conductor |
| 319 | 11 KV Polymer Composite Disc Insulator |
| 320 | Galvanized Nuts and Bolts |
| 321 | Danger Plates with Clamps |
| 322 | Anti Climb Device With Clamp |
| 323 | Earthing of Pole |
| 324 | Red Oxide |
| 325 | Aluminnium Paint |
| 326 | Galvanised Stay Set Complete |
| 327 | Permanent restoration of Dachan Dheeda Feeder LT |
| 328 | 8 Mtr ST pole (ST-410 SP 33) |
| 329 | Clamp for Shakle Insulator |
| 330 | 30 mm Sq ACSR Conductor |
| 331 | 16 kN Polymer Shakle Insulator |
| 332 | Galvanized Nuts and Bolts |
| 333 | Danger Plates |
| 334 | Earthing of Pole |
| 335 | Red Oxide |
| 336 | Aluminnium Paint |
| 337 | Galvanized Stay Sey Complete |
| 338 | Permanent restoration of Pernote Feeder HT |
| 339 | 9 Mtr ST pole (ST-410 SP 33) |
| 340 | MS Cross Arm with top bracket including Clamp |
| 341 | MS Channel x-Arm including Clamps and braces |
| 342 | 11 KV Polymer Composite Pin Insulator |
| 343 | 30 mm Sq ACSR Conductor |
| 344 | 11 KV Polymer Composite Disc Insulator |
| 345 | Galvanized Nuts and Bolts |
| 346 | Danger Plates with Clamps |
| 347 | Anti Climb Device With Clamp |
| 348 | Earthing of Pole |
| 349 | Red Oxide |
| 350 | Aluminnium Paint |
| 351 | Galvanised Stay Set Complete |
| 352 | Permanent restoration of Pernote Feeder LT |
| 353 | 8 Mtr ST pole (ST-410 SP 33) |
| 354 | Clamp for Shakle Insulator |
| 355 | 30 mm Sq ACSR Conductor |
| 356 | 16 kN Polymer Shakle Insulator |
| 357 | Galvanized Nuts and Bolts |
| 358 | Danger Plates |
| 359 | Earthing of Pole |
| 360 | Red Oxide |
| 361 | Aluminnium Paint |
| 362 | Galvanized Stay Sey Complete |
| 363 | Creation of 25 KVA sub-station on pernote feeder for Permanat Restoration |
| 364 | 11/0.433-0.250KV;50Hz), 25 KVA Aluminium Wound Distribution Transformer of latest Energy Efficiency Level-2 (New), IS1180 Part-I; 2014 as per latest upto date amendment |
| 365 | Gapless Surge Arrestor,9 KV ,10 KA ,LA with (polymer/porcelain) housing, Stn. Type |
| 366 | 11 kV G.O AB Switch , 3-phase, 3 pole 200 Amp. Vertical type |
| 367 | 11 kV Horn Gap Fuse Set 3 Phase 3 pole, 200 Amp |
| 368 | 25 mm² Single-Core Cable,1.1kV Grade, PVC Insulated Stranded Conductor FRLS type |
| 369 | 9 Mtr. Long Pole( ST-540 SP33) |
| 370 | 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 371 | GI Channel/Angle/Flat of sizes including clamps |
| 372 | Galvinized Nuts and Bolts. |
| 373 | Earthing of substation --Excavation of earth pit of dia 650 mm &depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 75 mmx10 mm & 50mmx6 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover. |
| 374 | 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 375 | LT Fuse set |
| 376 | Danger Plates with Clamps |
| 377 | Painting of Poles Red Oxide |
| 378 | Painting of Poles Aluminium Paint |
| 379 | Sundry items like aluminium lugs, Jumpers, binding Tape |
| 380 | Creation of 63 KVA sub-station on pernote feeder for Permanat Restoration |
| 381 | 11/0.433-0.250KV;50Hz, 63 Aluminium Wound Distribution Transformer of latest Energy Efficiency Level-2 (New), IS1180 Part-I; 2014 as per latest upto date amendment with externally fitted MCCB with cable box and 4x4 Mtrs. suitable cable of ratings. |
| 382 | Gapless Surge Arrestor,9 KV ,10 KA ,LA with (polymer/porcelain) housing, Stn. Type |
| 383 | 11 kV G.O AB Switch , 3-phase, 3 pole 200 Amp. Vertical type |
| 384 | 11 kV Horn Gap Fuse Set 3 Phase 3 pole, 200 Amp |
| 385 | 70 mm² Single-Core Cable,1.1kV Grade, PVC Insulated Stranded Conductor FRLS type |
| 386 | 9 Mtr. Long Pole( ST-540 SP33) |
| 387 | 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 388 | GI Channel/Angle/Flat of sizes including clamps |
| 389 | Galvinized Nuts and Bolts. |
| 390 | Earthing of substation. |
| 391 | 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 392 | LT Fuse set |
| 393 | Danger Plates with Clamps |
| 394 | Painting of Poles Red Oxide |
| 395 | Painting of Poles Aluminium Paint |
| 396 | Sundry items like aluminium lugs, Jumpers, binding Tape |
| 397 | Permanent restoration of Ramban Feeder HT |
| 398 | 9 Mtr ST pole (ST-410 SP 33) |
| 399 | MS Cross Arm with top bracket including Clamp |
| 400 | MS Channel x-Arm including Clamps and braces |
| 401 | 11 KV Polymer Composite Pin Insulator |
| 402 | 30 mm Sq ACSR Conductor |
| 403 | 11 KV Polymer Composite Disc Insulator |
| 404 | Galvanized Nuts and Bolts |
| 405 | Danger Plates with Clamps |
| 406 | Anti Climb Device With Clamp |
| 407 | Earthing of Pole |
| 408 | Red Oxide |
| 409 | Aluminnium Paint |
| 410 | Galvanised Stay Set Complete |
| 411 | Permanent restoration of Ramban Feeder LT |
| 412 | 8 Mtr ST pole (ST-410 SP 33) |
| 413 | Clamp for Shakle Insulator |
| 414 | 30 mm Sq ACSR Conductor |
| 415 | 16 kN Polymer Shakle Insulator |
| 416 | Galvanized Nuts and Bolts |
| 417 | Danger Plates |
| 418 | Earthing of Pole |
| 419 | Red Oxide |
| 420 | Aluminnium Paint |
| 421 | Galvanized Stay Sey Complete |
| 422 | Creation of 25 KVA sub-station on Ramban feeder for Permanat Restoration |
| 423 | 11/0.433-0.250KV;50Hz), 25 KVA Aluminium Wound Distribution Transformer of latest Energy Efficiency Level-2 (New), IS1180 Part-I; 2014 as per latest upto date amendment |
| 424 | Gapless Surge Arrestor,9 KV ,10 KA ,LA with (polymer/porcelain) housing, Stn. Type |
| 425 | 11 kV G.O AB Switch , 3-phase, 3 pole 200 Amp. Vertical type |
| 426 | 11 kV Horn Gap Fuse Set 3 Phase 3 pole, 200 Amp |
| 427 | 25 mm² Single-Core Cable,1.1kV Grade, PVC Insulated Stranded Conductor FRLS type |
| 428 | 9 Mtr. Long Pole( ST-540 SP33) |
| 429 | 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 430 | GI Channel/Angle/Flat of sizes including clamps |
| 431 | Galvinized Nuts and Bolts. |
| 432 | Earthing of substation --Excavation of earth pit of dia 650 mm &depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 75 mmx10 mm & 50mmx6 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover. |
| 433 | 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 434 | LT Fuse set |
| 435 | Danger Plates with Clamps |
| 436 | Painting of Poles Red Oxide |
| 437 | Painting of Poles Aluminium Paint |
| 438 | Sundry items like aluminium lugs, Jumpers, binding Tape |
| 439 | Creation of 63 KVA sub-station on ramban feeder for Permanat Restoration |
| 440 | 11/0.433-0.250KV;50Hz, 63 Aluminium Wound Distribution Transformer of latest Energy Efficiency Level-2 (New), IS1180 Part-I; 2014 as per latest upto date amendment with externally fitted MCCB with cable box and 4x4 Mtrs. suitable cable of ratings. |
| 441 | Gapless Surge Arrestor,9 KV ,10 KA ,LA with (polymer/porcelain) housing, Stn. Type |
| 442 | 11 kV G.O AB Switch , 3-phase, 3 pole 200 Amp. Vertical type |
| 443 | 11 kV Horn Gap Fuse Set 3 Phase 3 pole, 200 Amp |
| 444 | 70 mm² Single-Core Cable,1.1kV Grade, PVC Insulated Stranded Conductor FRLS type |
| 445 | 9 Mtr. Long Pole( ST-540 SP33) |
| 446 | 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 447 | GI Channel/Angle/Flat of sizes including clamps |
| 448 | Galvinized Nuts and Bolts. |
| 449 | Earthing of substation. |
| 450 | 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 451 | LT Fuse set |
| 452 | Danger Plates with Clamps |
| 453 | Painting of Poles Red Oxide |
| 454 | Painting of Poles Aluminium Paint |
| 455 | Sundry items like aluminium lugs, Jumpers, binding Tape |
| 456 | Creation of 100 KVA sub-station on Ramban feeder for Permanat Restoration |
| 457 | 11/0.433-0.250KV;50Hz, 100 Aluminium Wound Distribution Transformer of latest Energy Efficiency Level-2 (New), IS1180 Part-I; 2014 as per latest upto date amendment with externally fitted MCCB with cable box and 4x4 Mtrs. suitable cable of ratings. |
| 458 | Gapless Surge Arrestor,9 KV ,10 KA ,LA with (polymer/porcelain) housing, Stn. Type |
| 459 | 11 kV G.O AB Switch , 3-phase, 3 pole 200 Amp. Vertical type |
| 460 | 11 kV Horn Gap Fuse Set 3 Phase 3 pole, 200 Amp |
| 461 | 70 mm² Single-Core Cable,1.1kV Grade, PVC Insulated Stranded Conductor FRLS type |
| 462 | 9 Mtr. Long Pole( ST-540 SP33) |
| 463 | 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 464 | GI Channel/Angle/Flat of sizes including clamps |
| 465 | Galvinized Nuts and Bolts. |
| 466 | Earthing of substation. |
| 467 | 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 468 | LT Fuse set |
| 469 | Danger Plates with Clamps |
| 470 | Painting of Poles Red Oxide |
| 471 | Painting of Poles Aluminium Paint |
| 472 | Sundry items like aluminium lugs, Jumpers, binding Tape |
| 473 | Permanent restoration of Battery Chashma Feeder HT |
| 474 | 9 Mtr ST pole (ST-410 SP 33) |
| 475 | MS Cross Arm with top bracket including Clamp |
| 476 | MS Channel x-Arm including Clamps and braces |
| 477 | 11 KV Polymer Composite Pin Insulator |
| 478 | 30 mm Sq ACSR Conductor |
| 479 | 11 KV Polymer Composite Disc Insulator |
| 480 | Galvanized Nuts and Bolts |
| 481 | Danger Plates with Clamps |
| 482 | Anti Climb Device With Clamp |
| 483 | Earthing of Pole |
| 484 | Red Oxide |
| 485 | Aluminnium Paint |
| 486 | Galvanised Stay Set Complete |
| 487 | Permanent restoration of Battery Chashma Feeder LT |
| 488 | 8 Mtr ST pole (ST-410 SP 33) |
| 489 | Clamp for Shakle Insulator |
| 490 | 30 mm Sq ACSR Conductor |
| 491 | 16 kN Polymer Shakle Insulator |
| 492 | Galvanized Nuts and Bolts |
| 493 | Danger Plates |
| 494 | Earthing of Pole |
| 495 | Red Oxide |
| 496 | Aluminnium Paint |
| 497 | Galvanized Stay Sey Complete |
| 498 | Creation of 25 KVA sub-station on battery Chashma feeder for Permanat Restoration |
| 499 | 11/0.433-0.250KV;50Hz), 25 KVA Aluminium Wound Distribution Transformer of latest Energy Efficiency Level-2 (New), IS1180 Part-I; 2014 as per latest upto date amendment |
| 500 | Gapless Surge Arrestor,9 KV ,10 KA ,LA with (polymer/porcelain) housing, Stn. Type |
| 501 | 11 kV G.O AB Switch , 3-phase, 3 pole 200 Amp. Vertical type |
| 502 | 11 kV Horn Gap Fuse Set 3 Phase 3 pole, 200 Amp |
| 503 | 25 mm² Single-Core Cable,1.1kV Grade, PVC Insulated Stranded Conductor FRLS type |
| 504 | 9 Mtr. Long Pole( ST-540 SP33) |
| 505 | 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 506 | GI Channel/Angle/Flat of sizes including clamps |
| 507 | Galvinized Nuts and Bolts. |
| 508 | Earthing of substation --Excavation of earth pit of dia 650 mm &depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 75 mmx10 mm & 50mmx6 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover. |
| 509 | 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 510 | LT Fuse set |
| 511 | Danger Plates with Clamps |
| 512 | Painting of Poles Red Oxide |
| 513 | Painting of Poles Aluminium Paint |
| 514 | Sundry items like aluminium lugs, Jumpers, binding Tape |
| 515 | Creation of 63 KVA sub-station on battery Chashma feeder for Permanat Restoration |
| 516 | 11/0.433-0.250KV;50Hz, 63 Aluminium Wound Distribution Transformer of latest Energy Efficiency Level-2 (New), IS1180 Part-I; 2014 as per latest upto date amendment with externally fitted MCCB with cable box and 4x4 Mtrs. suitable cable of ratings. |
| 517 | Gapless Surge Arrestor,9 KV ,10 KA ,LA with (polymer/porcelain) housing, Stn. Type |
| 518 | 11 kV G.O AB Switch , 3-phase, 3 pole 200 Amp. Vertical type |
| 519 | 11 kV Horn Gap Fuse Set 3 Phase 3 pole, 200 Amp |
| 520 | 70 mm² Single-Core Cable,1.1kV Grade, PVC Insulated Stranded Conductor FRLS type |
| 521 | 9 Mtr. Long Pole( ST-540 SP33) |
| 522 | 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 523 | GI Channel/Angle/Flat of sizes including clamps |
| 524 | Galvinized Nuts and Bolts. |
| 525 | Earthing of substation. |
| 526 | 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 527 | LT Fuse set |
| 528 | Danger Plates with Clamps |
| 529 | Painting of Poles Red Oxide |
| 530 | Painting of Poles Aluminium Paint |
| 531 | Sundry items like aluminium lugs, Jumpers, binding Tape |
| 532 | Creation of 100 KVA sub-station on Batttery Chashma feeder for Permanat Restoration |
| 533 | 11/0.433-0.250KV;50Hz, 100 Aluminium Wound Distribution Transformer of latest Energy Efficiency Level-2 (New), IS1180 Part-I; 2014 as per latest upto date amendment with externally fitted MCCB with cable box and 4x4 Mtrs. suitable cable of ratings. |
| 534 | Gapless Surge Arrestor,9 KV ,10 KA ,LA with (polymer/porcelain) housing, Stn. Type |
| 535 | 11 kV G.O AB Switch , 3-phase, 3 pole 200 Amp. Vertical type |
| 536 | 11 kV Horn Gap Fuse Set 3 Phase 3 pole, 200 Amp |
| 537 | 70 mm² Single-Core Cable,1.1kV Grade, PVC Insulated Stranded Conductor FRLS type |
| 538 | 9 Mtr. Long Pole( ST-540 SP33) |
| 539 | 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 540 | GI Channel/Angle/Flat of sizes including clamps |
| 541 | Galvinized Nuts and Bolts. |
| 542 | Earthing of substation. |
| 543 | 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 544 | LT Fuse set |
| 545 | Danger Plates with Clamps |
| 546 | Painting of Poles Red Oxide |
| 547 | Painting of Poles Aluminium Paint |
| 548 | Sundry items like aluminium lugs, Jumpers, binding Tape |
| 549 | Permanent restoration of Old Chanderkote Feeder HT |
| 550 | 9 Mtr ST pole (ST-410 SP 33) |
| 551 | MS Cross Arm with top bracket including Clamp |
| 552 | MS Channel x-Arm including Clamps and braces |
| 553 | 11 KV Polymer Composite Pin Insulator |
| 554 | 30 mm Sq ACSR Conductor |
| 555 | 11 KV Polymer Composite Disc Insulator |
| 556 | Galvanized Nuts and Bolts |
| 557 | Danger Plates with Clamps |
| 558 | Anti Climb Device With Clamp |
| 559 | Earthing of Pole |
| 560 | Red Oxide |
| 561 | Aluminnium Paint |
| 562 | Galvanised Stay Set Complete |
| 563 | Permanent restoration of Old Chanderkote Feeder LT |
| 564 | 8 Mtr ST pole (ST-410 SP 33) |
| 565 | Clamp for Shakle Insulator |
| 566 | 30 mm Sq ACSR Conductor |
| 567 | 16 kN Polymer Shakle Insulator |
| 568 | Galvanized Nuts and Bolts |
| 569 | Danger Plates |
| 570 | Earthing of Pole |
| 571 | Red Oxide |
| 572 | Aluminnium Paint |
| 573 | Galvanized Stay Sey Complete |
| 574 | Permanent restoration of Karol Feeder HT |
| 575 | 9 Mtr ST pole (ST-410 SP 33) |
| 576 | MS Cross Arm with top bracket including Clamp |
| 577 | MS Channel x-Arm including Clamps and braces |
| 578 | 11 KV Polymer Composite Pin Insulator |
| 579 | 30 mm Sq ACSR Conductor |
| 580 | 11 KV Polymer Composite Disc Insulator |
| 581 | Galvanized Nuts and Bolts |
| 582 | Danger Plates with Clamps |
| 583 | Anti Climb Device With Clamp |
| 584 | Earthing of Pole |
| 585 | Red Oxide |
| 586 | Aluminnium Paint |
| 587 | Galvanised Stay Set Complete |
| 588 | Permanent restoration of Karol Feeder LT |
| 589 | 8 Mtr ST pole (ST-410 SP 33) |
| 590 | Clamp for Shakle Insulator |
| 591 | 30 mm Sq ACSR Conductor |
| 592 | 16 kN Polymer Shakle Insulator |
| 593 | Galvanized Nuts and Bolts |
| 594 | Danger Plates |
| 595 | Earthing of Pole |
| 596 | Red Oxide |
| 597 | Aluminnium Paint |
| 598 | Galvanized Stay Sey Complete |
| 599 | Permanent restoration of Essential Ramban HT |
| 600 | 9 Mtr ST pole (ST-410 SP 33) |
| 601 | MS Cross Arm with top bracket including Clamp |
| 602 | MS Channel x-Arm including Clamps and braces |
| 603 | 11 KV Polymer Composite Pin Insulator |
| 604 | 30 mm Sq ACSR Conductor |
| 605 | 11 KV Polymer Composite Disc Insulator |
| 606 | Galvanized Nuts and Bolts |
| 607 | Danger Plates with Clamps |
| 608 | Anti Climb Device With Clamp |
| 609 | Earthing of Pole |
| 610 | Red Oxide |
| 611 | Aluminnium Paint |
| 612 | Galvanised Stay Set Complete |
| 613 | Permanent restoration of Sangaldan Feeder LT |
| 614 | 8 Mtr ST pole (ST-410 SP 33) |
| 615 | Clamp for Shakle Insulator |
| 616 | 30 mm Sq ACSR Conductor |
| 617 | 16 kN Polymer Shakle Insulator |
| 618 | Galvanized Nuts and Bolts |
| 619 | Danger Plates |
| 620 | Earthing of Pole |
| 621 | Red Oxide |
| 622 | Aluminnium Paint |
| 623 | Galvanized Stay Sey Complete |
| 624 | Permanent restoration of Thatharka HT |
| 625 | 9 Mtr ST pole (ST-410 SP 33) |
| 626 | MS Cross Arm with top bracket including Clamp |
| 627 | MS Channel x-Arm including Clamps and braces |
| 628 | 11 KV Polymer Composite Pin Insulator |
| 629 | 30 mm Sq ACSR Conductor |
| 630 | 11 KV Polymer Composite Disc Insulator |
| 631 | Galvanized Nuts and Bolts |
| 632 | Danger Plates with Clamps |
| 633 | Anti Climb Device With Clamp |
| 634 | Earthing of Pole |
| 635 | Red Oxide |
| 636 | Aluminnium Paint |
| 637 | Galvanised Stay Set Complete |
| 638 | Permanent restoration of Thatharka Feeder LT |
| 639 | 8 Mtr ST pole (ST-410 SP 33) |
| 640 | Clamp for Shakle Insulator |
| 641 | 30 mm Sq ACSR Conductor |
| 642 | 16 kN Polymer Shakle Insulator |
| 643 | Galvanized Nuts and Bolts |
| 644 | Danger Plates |
| 645 | Earthing of Pole |
| 646 | Red Oxide |
| 647 | Aluminnium Paint |
| 648 | Galvanized Stay Sey Complete |
| 649 | Permanent restoration of Old Gool feeder HT |
| 650 | 9 Mtr ST pole (ST-410 SP 33) |
| 651 | MS Cross Arm with top bracket including Clamp |
| 652 | MS Channel x-Arm including Clamps and braces |
| 653 | 11 KV Polymer Composite Pin Insulator |
| 654 | 30 mm Sq ACSR Conductor |
| 655 | 11 KV Polymer Composite Disc Insulator |
| 656 | Galvanized Nuts and Bolts |
| 657 | Danger Plates with Clamps |
| 658 | Anti Climb Device With Clamp |
| 659 | Earthing of Pole |
| 660 | Red Oxide |
| 661 | Aluminnium Paint |
| 662 | Galvanised Stay Set Complete |
| 663 | Permanent restoration of Old Gool Feeder LT |
| 664 | 8 Mtr ST pole (ST-410 SP 33) |
| 665 | Clamp for Shakle Insulator |
| 666 | 30 mm Sq ACSR Conductor |
| 667 | 16 kN Polymer Shakle Insulator |
| 668 | Galvanized Nuts and Bolts |
| 669 | Danger Plates |
| 670 | Earthing of Pole |
| 671 | Red Oxide |
| 672 | Aluminnium Paint |
| 673 | Galvanized Stay Sey Complete |
| 674 | Creation of 100 KVA sub-station on Old Gool for Permanat Restoration |
| 675 | 11/0.433-0.250KV;50Hz, 100 Aluminium Wound Distribution Transformer of latest Energy Efficiency Level-2 (New), IS1180 Part-I; 2014 as per latest upto date amendment with externally fitted MCCB with cable box and 4x4 Mtrs. suitable cable of ratings. |
| 676 | Gapless Surge Arrestor,9 KV ,10 KA ,LA with (polymer/porcelain) housing, Stn. Type |
| 677 | 11 kV G.O AB Switch , 3-phase, 3 pole 200 Amp. Vertical type |
| 678 | 11 kV Horn Gap Fuse Set 3 Phase 3 pole, 200 Amp |
| 679 | 70 mm² Single-Core Cable,1.1kV Grade, PVC Insulated Stranded Conductor FRLS type |
| 680 | 9 Mtr. Long Pole( ST-540 SP33) |
| 681 | 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 682 | GI Channel/Angle/Flat of sizes including clamps |
| 683 | Galvinized Nuts and Bolts. |
| 684 | Earthing of substation. |
| 685 | 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 686 | LT Fuse set |
| 687 | Danger Plates with Clamps |
| 688 | Painting of Poles Red Oxide |
| 689 | Painting of Poles Aluminium Paint |
| 690 | Sundry items like aluminium lugs, Jumpers, binding Tape |
| 691 | Permanent restoration of Banihal/Hospital feeder HT |
| 692 | 9 Mtr ST pole (ST-410 SP 33) |
| 693 | MS Cross Arm with top bracket including Clamp |
| 694 | MS Channel x-Arm including Clamps and braces |
| 695 | 11 KV Polymer Composite Pin Insulator |
| 696 | 30 mm Sq ACSR Conductor |
| 697 | 11 KV Polymer Composite Disc Insulator |
| 698 | Galvanized Nuts and Bolts |
| 699 | Danger Plates with Clamps |
| 700 | Anti Climb Device With Clamp |
| 701 | Earthing of Pole |
| 702 | Red Oxide |
| 703 | Aluminnium Paint |
| 704 | Galvanised Stay Set Complete |
| 705 | Permanent restoration of Banihal/Hospital Feeder LT |
| 706 | 8 Mtr ST pole (ST-410 SP 33) |
| 707 | Clamp for Shakle Insulator |
| 708 | 30 mm Sq ACSR Conductor |
| 709 | 16 kN Polymer Shakle Insulator |
| 710 | Galvanized Nuts and Bolts |
| 711 | Danger Plates |
| 712 | Earthing of Pole |
| 713 | Red Oxide |
| 714 | Aluminnium Paint |
| 715 | Galvanized Stay Sey Complete |
| 716 | Permanent restoration of Old Nowgam feeder HT |
| 717 | 9 Mtr ST pole (ST-410 SP 33) |
| 718 | MS Cross Arm with top bracket including Clamp |
| 719 | MS Channel x-Arm including Clamps and braces |
| 720 | 11 KV Polymer Composite Pin Insulator |
| 721 | 30 mm Sq ACSR Conductor |
| 722 | 11 KV Polymer Composite Disc Insulator |
| 723 | Galvanized Nuts and Bolts |
| 724 | Danger Plates with Clamps |
| 725 | Anti Climb Device With Clamp |
| 726 | Earthing of Pole |
| 727 | Red Oxide |
| 728 | Aluminnium Paint |
| 729 | Galvanised Stay Set Complete |
| 730 | Permanent restoration of Old Nowgam Feeder LT |
| 731 | 8 Mtr ST pole (ST-410 SP 33) |
| 732 | Clamp for Shakle Insulator |
| 733 | 30 mm Sq ACSR Conductor |
| 734 | 16 kN Polymer Shakle Insulator |
| 735 | Galvanized Nuts and Bolts |
| 736 | Danger Plates |
| 737 | Earthing of Pole |
| 738 | Red Oxide |
| 739 | Aluminnium Paint |
| 740 | Galvanized Stay Sey Complete |
| 741 | Permanent restoration of bankoot feeder HT |
| 742 | 9 Mtr ST pole (ST-410 SP 33) |
| 743 | MS Cross Arm with top bracket including Clamp |
| 744 | MS Channel x-Arm including Clamps and braces |
| 745 | 11 KV Polymer Composite Pin Insulator |
| 746 | 30 mm Sq ACSR Conductor |
| 747 | 11 KV Polymer Composite Disc Insulator |
| 748 | Galvanized Nuts and Bolts |
| 749 | Danger Plates with Clamps |
| 750 | Anti Climb Device With Clamp |
| 751 | Earthing of Pole |
| 752 | Red Oxide |
| 753 | Aluminnium Paint |
| 754 | Galvanised Stay Set Complete |
| 755 | Permanent restoration of bankoot Feeder LT |
| 756 | 8 Mtr ST pole (ST-410 SP 33) |
| 757 | Clamp for Shakle Insulator |
| 758 | 30 mm Sq ACSR Conductor |
| 759 | 16 kN Polymer Shakle Insulator |
| 760 | Galvanized Nuts and Bolts |
| 761 | Danger Plates |
| 762 | Earthing of Pole |
| 763 | Red Oxide |
| 764 | Aluminnium Paint |
| 765 | Galvanized Stay Sey Complete |
| 766 | Permanent restoration of Gund feeder HT |
| 767 | 9 Mtr ST pole (ST-410 SP 33) |
| 768 | MS Cross Arm with top bracket including Clamp |
| 769 | MS Channel x-Arm including Clamps and braces |
| 770 | 11 KV Polymer Composite Pin Insulator |
| 771 | 30 mm Sq ACSR Conductor |
| 772 | 11 KV Polymer Composite Disc Insulator |
| 773 | Galvanized Nuts and Bolts |
| 774 | Danger Plates with Clamps |
| 775 | Anti Climb Device With Clamp |
| 776 | Earthing of Pole |
| 777 | Red Oxide |
| 778 | Aluminnium Paint |
| 779 | Galvanised Stay Set Complete |
| 780 | Permanent restoration of Gund Feeder LT |
| 781 | 8 Mtr ST pole (ST-410 SP 33) |
| 782 | Clamp for Shakle Insulator |
| 783 | 30 mm Sq ACSR Conductor |
| 784 | 16 kN Polymer Shakle Insulator |
| 785 | Galvanized Nuts and Bolts |
| 786 | Danger Plates |
| 787 | Earthing of Pole |
| 788 | Red Oxide |
| 789 | Aluminnium Paint |
| 790 | Galvanized Stay Sey Complete |
| 791 | Permanent restoration of Hinjhall Feeder HT |
| 792 | 9 Mtr ST pole (ST-410 SP 33) |
| 793 | MS Cross Arm with top bracket including Clamp |
| 794 | MS Channel x-Arm including Clamps and braces |
| 795 | 11 KV Polymer Composite Pin Insulator |
| 796 | 30 mm Sq ACSR Conductor |
| 797 | 11 KV Polymer Composite Disc Insulator |
| 798 | Galvanized Nuts and Bolts |
| 799 | Danger Plates with Clamps |
| 800 | Anti Climb Device With Clamp |
| 801 | Earthing of Pole |
| 802 | Red Oxide |
| 803 | Aluminnium Paint |
| 804 | Galvanised Stay Set Complete |
| 805 | Permanent restoration of Hinjhall Feeder LT |
| 806 | 8 Mtr ST pole (ST-410 SP 33) |
| 807 | Clamp for Shakle Insulator |
| 808 | 30 mm Sq ACSR Conductor |
| 809 | 16 kN Polymer Shakle Insulator |
| 810 | Galvanized Nuts and Bolts |
| 811 | Danger Plates |
| 812 | Earthing of Pole |
| 813 | Red Oxide |
| 814 | Aluminnium Paint |
| 815 | Galvanized Stay Sey Complete |
| 816 | Creation of 25 KVA sub-station on Hinjhall feeder for Permanat Restoration |
| 817 | 11/0.433-0.250KV;50Hz), 25 KVA Aluminium Wound Distribution Transformer of latest Energy Efficiency Level-2 (New), IS1180 Part-I; 2014 as per latest upto date amendment |
| 818 | Gapless Surge Arrestor,9 KV ,10 KA ,LA with (polymer/porcelain) housing, Stn. Type |
| 819 | 11 kV G.O AB Switch , 3-phase, 3 pole 200 Amp. Vertical type |
| 820 | 11 kV Horn Gap Fuse Set 3 Phase 3 pole, 200 Amp |
| 821 | 25 mm² Single-Core Cable,1.1kV Grade, PVC Insulated Stranded Conductor FRLS type |
| 822 | 9 Mtr. Long Pole( ST-540 SP33) |
| 823 | 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 824 | GI Channel/Angle/Flat of sizes including clamps |
| 825 | Galvinized Nuts and Bolts. |
| 826 | Earthing of substation --Excavation of earth pit of dia 650 mm &depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 75 mmx10 mm & 50mmx6 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover. |
| 827 | 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 828 | LT Fuse set |
| 829 | Danger Plates with Clamps |
| 830 | Painting of Poles Red Oxide |
| 831 | Painting of Poles Aluminium Paint |
| 832 | Sundry items like aluminium lugs, Jumpers, binding Tape |
| 833 | Permanent restoration of Sherbibi Feeder HT |
| 834 | 9 Mtr ST pole (ST-410 SP 33) |
| 835 | MS Cross Arm with top bracket including Clamp |
| 836 | MS Channel x-Arm including Clamps and braces |
| 837 | 11 KV Polymer Composite Pin Insulator |
| 838 | 30 mm Sq ACSR Conductor |
| 839 | 11 KV Polymer Composite Disc Insulator |
| 840 | Galvanized Nuts and Bolts |
| 841 | Danger Plates with Clamps |
| 842 | Anti Climb Device With Clamp |
| 843 | Earthing of Pole |
| 844 | Red Oxide |
| 845 | Aluminnium Paint |
| 846 | Galvanised Stay Set Complete |
| 847 | Permanent restoration of Sherbibi Feeder LT |
| 848 | 8 Mtr ST pole (ST-410 SP 33) |
| 849 | Clamp for Shakle Insulator |
| 850 | 30 mm Sq ACSR Conductor |
| 851 | 16 kN Polymer Shakle Insulator |
| 852 | Galvanized Nuts and Bolts |
| 853 | Danger Plates |
| 854 | Earthing of Pole |
| 855 | Red Oxide |
| 856 | Aluminnium Paint |
| 857 | Galvanized Stay Sey Complete |
| 858 | Creation of 25 KVA sub-station on Sherbibi feeder for Permanat Restoration |
| 859 | 11/0.433-0.250KV;50Hz), 25 KVA Aluminium Wound Distribution Transformer of latest Energy Efficiency Level-2 (New), IS1180 Part-I; 2014 as per latest upto date amendment |
| 860 | Gapless Surge Arrestor,9 KV ,10 KA ,LA with (polymer/porcelain) housing, Stn. Type |
| 861 | 11 kV G.O AB Switch , 3-phase, 3 pole 200 Amp. Vertical type |
| 862 | 11 kV Horn Gap Fuse Set 3 Phase 3 pole, 200 Amp |
| 863 | 25 mm² Single-Core Cable,1.1kV Grade, PVC Insulated Stranded Conductor FRLS type |
| 864 | 9 Mtr. Long Pole( ST-540 SP33) |
| 865 | 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 866 | GI Channel/Angle/Flat of sizes including clamps |
| 867 | Galvinized Nuts and Bolts. |
| 868 | Earthing of substation --Excavation of earth pit of dia 650 mm &depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 75 mmx10 mm & 50mmx6 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover. |
| 869 | 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 870 | LT Fuse set |
| 871 | Danger Plates with Clamps |
| 872 | Painting of Poles Red Oxide |
| 873 | Painting of Poles Aluminium Paint |
| 874 | Sundry items like aluminium lugs, Jumpers, binding Tape |
| 875 | Permanent restoration of chareel Feeder HT |
| 876 | 9 Mtr ST pole (ST-410 SP 33) |
| 877 | MS Cross Arm with top bracket including Clamp |
| 878 | MS Channel x-Arm including Clamps and braces |
| 879 | 11 KV Polymer Composite Pin Insulator |
| 880 | 30 mm Sq ACSR Conductor |
| 881 | 11 KV Polymer Composite Disc Insulator |
| 882 | Galvanized Nuts and Bolts |
| 883 | Danger Plates with Clamps |
| 884 | Anti Climb Device With Clamp |
| 885 | Earthing of Pole |
| 886 | Red Oxide |
| 887 | Aluminnium Paint |
| 888 | Galvanised Stay Set Complete |
| 889 | Permanent restoration of Chareel Feeder LT |
| 890 | 8 Mtr ST pole (ST-410 SP 33) |
| 891 | Clamp for Shakle Insulator |
| 892 | 30 mm Sq ACSR Conductor |
| 893 | 16 kN Polymer Shakle Insulator |
| 894 | Galvanized Nuts and Bolts |
| 895 | Danger Plates |
| 896 | Earthing of Pole |
| 897 | Red Oxide |
| 898 | Aluminnium Paint |
| 899 | Galvanized Stay Sey Complete |
| 900 | Creation of 25 KVA sub-station on Chareel feeder for Permanat Restoration |
| 901 | 11/0.433-0.250KV;50Hz), 25 KVA Aluminium Wound Distribution Transformer of latest Energy Efficiency Level-2 (New), IS1180 Part-I; 2014 as per latest upto date amendment |
| 902 | Gapless Surge Arrestor,9 KV ,10 KA ,LA with (polymer/porcelain) housing, Stn. Type |
| 903 | 11 kV G.O AB Switch , 3-phase, 3 pole 200 Amp. Vertical type |
| 904 | 11 kV Horn Gap Fuse Set 3 Phase 3 pole, 200 Amp |
| 905 | 25 mm² Single-Core Cable,1.1kV Grade, PVC Insulated Stranded Conductor FRLS type |
| 906 | 9 Mtr. Long Pole( ST-540 SP33) |
| 907 | 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 908 | GI Channel/Angle/Flat of sizes including clamps |
| 909 | Galvinized Nuts and Bolts. |
| 910 | Earthing of substation --Excavation of earth pit of dia 650 mm &depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 75 mmx10 mm & 50mmx6 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover. |
| 911 | 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 912 | LT Fuse set |
| 913 | Danger Plates with Clamps |
| 914 | Painting of Poles Red Oxide |
| 915 | Painting of Poles Aluminium Paint |
| 916 | Sundry items like aluminium lugs, Jumpers, binding Tape |
| 917 | Permanent restoration of J Tunnel Feeder HT |
| 918 | 9 Mtr ST pole (ST-410 SP 33) |
| 919 | MS Cross Arm with top bracket including Clamp |
| 920 | MS Channel x-Arm including Clamps and braces |
| 921 | 11 KV Polymer Composite Pin Insulator |
| 922 | 30 mm Sq ACSR Conductor |
| 923 | 11 KV Polymer Composite Disc Insulator |
| 924 | Galvanized Nuts and Bolts |
| 925 | Danger Plates with Clamps |
| 926 | Anti Climb Device With Clamp |
| 927 | Earthing of Pole |
| 928 | Red Oxide |
| 929 | Aluminnium Paint |
| 930 | Galvanised Stay Set Complete |
| 931 | Permanent restoration of J Tunnel Feeder LT |
| 932 | 8 Mtr ST pole (ST-410 SP 33) |
| 933 | Clamp for Shakle Insulator |
| 934 | 30 mm Sq ACSR Conductor |
| 935 | 16 kN Polymer Shakle Insulator |
| 936 | Galvanized Nuts and Bolts |
| 937 | Danger Plates |
| 938 | Earthing of Pole |
| 939 | Red Oxide |
| 940 | Aluminnium Paint |
| 941 | Galvanized Stay Sey Complete |
| 942 | Permanent restoration of new Nowgam Feeder HT |
| 943 | 9 Mtr ST pole (ST-410 SP 33) |
| 944 | MS Cross Arm with top bracket including Clamp |
| 945 | MS Channel x-Arm including Clamps and braces |
| 946 | 11 KV Polymer Composite Pin Insulator |
| 947 | 30 mm Sq ACSR Conductor |
| 948 | 11 KV Polymer Composite Disc Insulator |
| 949 | Galvanized Nuts and Bolts |
| 950 | Danger Plates with Clamps |
| 951 | Anti Climb Device With Clamp |
| 952 | Earthing of Pole |
| 953 | Red Oxide |
| 954 | Aluminnium Paint |
| 955 | Galvanised Stay Set Complete |
| 956 | Permanent restoration of New Nowgam Feeder LT |
| 957 | 8 Mtr ST pole (ST-410 SP 33) |
| 958 | Clamp for Shakle Insulator |
| 959 | 30 mm Sq ACSR Conductor |
| 960 | 16 kN Polymer Shakle Insulator |
| 961 | Galvanized Nuts and Bolts |
| 962 | Danger Plates |
| 963 | Earthing of Pole |
| 964 | Red Oxide |
| 965 | Aluminnium Paint |
| 966 | Galvanized Stay Sey Complete |
| 967 | Creation of 25 KVA sub-station on New Nowgam feeder for Permanat Restoration |
| 968 | 11/0.433-0.250KV;50Hz), 25 KVA Aluminium Wound Distribution Transformer of latest Energy Efficiency Level-2 (New), IS1180 Part-I; 2014 as per latest upto date amendment |
| 969 | Gapless Surge Arrestor,9 KV ,10 KA ,LA with (polymer/porcelain) housing, Stn. Type |
| 970 | 11 kV G.O AB Switch , 3-phase, 3 pole 200 Amp. Vertical type |
| 971 | 11 kV Horn Gap Fuse Set 3 Phase 3 pole, 200 Amp |
| 972 | 25 mm² Single-Core Cable,1.1kV Grade, PVC Insulated Stranded Conductor FRLS type |
| 973 | 9 Mtr. Long Pole( ST-540 SP33) |
| 974 | 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 975 | GI Channel/Angle/Flat of sizes including clamps |
| 976 | Galvinized Nuts and Bolts. |
| 977 | Earthing of substation --Excavation of earth pit of dia 650 mm &depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 75 mmx10 mm & 50mmx6 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover. |
| 978 | 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 979 | LT Fuse set |
| 980 | Danger Plates with Clamps |
| 981 | Painting of Poles Red Oxide |
| 982 | Painting of Poles Aluminium Paint |
| 983 | Sundry items like aluminium lugs, Jumpers, binding Tape |
| 984 | Permanent restoration of Paristan Feeder HT |
| 985 | 9 Mtr ST pole (ST-410 SP 33) |
| 986 | MS Cross Arm with top bracket including Clamp |
| 987 | MS Channel x-Arm including Clamps and braces |
| 988 | 11 KV Polymer Composite Pin Insulator |
| 989 | 30 mm Sq ACSR Conductor |
| 990 | 11 KV Polymer Composite Disc Insulator |
| 991 | Galvanized Nuts and Bolts |
| 992 | Danger Plates with Clamps |
| 993 | Anti Climb Device With Clamp |
| 994 | Earthing of Pole |
| 995 | Red Oxide |
| 996 | Aluminnium Paint |
| 997 | Galvanised Stay Set Complete |
| 998 | Permanent restoration of Paristan Feeder LT |
| 999 | 8 Mtr ST pole (ST-410 SP 33) |
| 1000 | Clamp for Shakle Insulator |
| 1001 | 30 mm Sq ACSR Conductor |
| 1002 | 16 kN Polymer Shakle Insulator |
| 1003 | Galvanized Nuts and Bolts |
| 1004 | Danger Plates |
| 1005 | Earthing of Pole |
| 1006 | Red Oxide |
| 1007 | Aluminnium Paint |
| 1008 | Galvanized Stay Sey Complete |
| 1009 | Creation of 25 KVA sub-station on Paristan feeder for Permanat Restoration |
| 1010 | 11/0.433-0.250KV;50Hz), 25 KVA Aluminium Wound Distribution Transformer of latest Energy Efficiency Level-2 (New), IS1180 Part-I; 2014 as per latest upto date amendment |
| 1011 | Gapless Surge Arrestor,9 KV ,10 KA ,LA with (polymer/porcelain) housing, Stn. Type |
| 1012 | 11 kV G.O AB Switch , 3-phase, 3 pole 200 Amp. Vertical type |
| 1013 | 11 kV Horn Gap Fuse Set 3 Phase 3 pole, 200 Amp |
| 1014 | 25 mm² Single-Core Cable,1.1kV Grade, PVC Insulated Stranded Conductor FRLS type |
| 1015 | 9 Mtr. Long Pole( ST-540 SP33) |
| 1016 | 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 1017 | GI Channel/Angle/Flat of sizes including clamps |
| 1018 | Galvinized Nuts and Bolts. |
| 1019 | Earthing of substation --Excavation of earth pit of dia 650 mm &depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 75 mmx10 mm & 50mmx6 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover. |
| 1020 | 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 1021 | LT Fuse set |
| 1022 | Danger Plates with Clamps |
| 1023 | Painting of Poles Red Oxide |
| 1024 | Painting of Poles Aluminium Paint |
| 1025 | Sundry items like aluminium lugs, Jumpers, binding Tape |
| 1026 | Permanent restoration of New Ukhral Feeder HT |
| 1027 | 9 Mtr ST pole (ST-410 SP 33) |
| 1028 | MS Cross Arm with top bracket including Clamp |
| 1029 | MS Channel x-Arm including Clamps and braces |
| 1030 | 11 KV Polymer Composite Pin Insulator |
| 1031 | 30 mm Sq ACSR Conductor |
| 1032 | 11 KV Polymer Composite Disc Insulator |
| 1033 | Galvanized Nuts and Bolts |
| 1034 | Danger Plates with Clamps |
| 1035 | Anti Climb Device With Clamp |
| 1036 | Earthing of Pole |
| 1037 | Red Oxide |
| 1038 | Aluminnium Paint |
| 1039 | Galvanised Stay Set Complete |
| 1040 | Permanent restoration of New Ukhral Feeder LT |
| 1041 | 8 Mtr ST pole (ST-410 SP 33) |
| 1042 | Clamp for Shakle Insulator |
| 1043 | 30 mm Sq ACSR Conductor |
| 1044 | 16 kN Polymer Shakle Insulator |
| 1045 | Galvanized Nuts and Bolts |
| 1046 | Danger Plates |
| 1047 | Earthing of Pole |
| 1048 | Red Oxide |
| 1049 | Aluminnium Paint |
| 1050 | Galvanized Stay Sey Complete |
| 1051 | Creation of 25 KVA sub-station on New Ukhral feeder for Permanat Restoration |
| 1052 | 11/0.433-0.250KV;50Hz), 25 KVA Aluminium Wound Distribution Transformer of latest Energy Efficiency Level-2 (New), IS1180 Part-I; 2014 as per latest upto date amendment |
| 1053 | Gapless Surge Arrestor,9 KV ,10 KA ,LA with (polymer/porcelain) housing, Stn. Type |
| 1054 | 11 kV G.O AB Switch , 3-phase, 3 pole 200 Amp. Vertical type |
| 1055 | 11 kV Horn Gap Fuse Set 3 Phase 3 pole, 200 Amp |
| 1056 | 25 mm² Single-Core Cable,1.1kV Grade, PVC Insulated Stranded Conductor FRLS type |
| 1057 | 9 Mtr. Long Pole( ST-540 SP33) |
| 1058 | 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 1059 | GI Channel/Angle/Flat of sizes including clamps |
| 1060 | Galvinized Nuts and Bolts. |
| 1061 | Earthing of substation --Excavation of earth pit of dia 650 mm &depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 75 mmx10 mm & 50mmx6 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover. |
| 1062 | 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 1063 | LT Fuse set |
| 1064 | Danger Plates with Clamps |
| 1065 | Painting of Poles Red Oxide |
| 1066 | Painting of Poles Aluminium Paint |
| 1067 | Sundry items like aluminium lugs, Jumpers, binding Tape |
| 1068 | Permanent restoration of Pogal Feeder HT |
| 1069 | 9 Mtr ST pole (ST-410 SP 33) |
| 1070 | MS Cross Arm with top bracket including Clamp |
| 1071 | MS Channel x-Arm including Clamps and braces |
| 1072 | 11 KV Polymer Composite Pin Insulator |
| 1073 | 30 mm Sq ACSR Conductor |
| 1074 | 11 KV Polymer Composite Disc Insulator |
| 1075 | Galvanized Nuts and Bolts |
| 1076 | Danger Plates with Clamps |
| 1077 | Anti Climb Device With Clamp |
| 1078 | Earthing of Pole |
| 1079 | Red Oxide |
| 1080 | Aluminnium Paint |
| 1081 | Galvanised Stay Set Complete |
| 1082 | Permanent restoration of Pogal Feeder LT |
| 1083 | 8 Mtr ST pole (ST-410 SP 33) |
| 1084 | Clamp for Shakle Insulator |
| 1085 | 30 mm Sq ACSR Conductor |
| 1086 | 16 kN Polymer Shakle Insulator |
| 1087 | Galvanized Nuts and Bolts |
| 1088 | Danger Plates |
| 1089 | Earthing of Pole |
| 1090 | Red Oxide |
| 1091 | Aluminnium Paint |
| 1092 | Galvanized Stay Sey Complete |
| 1093 | Creation of 25 KVA sub-station on Pogal feeder for Permanat Restoration |
| 1094 | 11/0.433-0.250KV;50Hz), 25 KVA Aluminium Wound Distribution Transformer of latest Energy Efficiency Level-2 (New), IS1180 Part-I; 2014 as per latest upto date amendment |
| 1095 | Gapless Surge Arrestor,9 KV ,10 KA ,LA with (polymer/porcelain) housing, Stn. Type |
| 1096 | 11 kV G.O AB Switch , 3-phase, 3 pole 200 Amp. Vertical type |
| 1097 | 11 kV Horn Gap Fuse Set 3 Phase 3 pole, 200 Amp |
| 1098 | 25 mm² Single-Core Cable,1.1kV Grade, PVC Insulated Stranded Conductor FRLS type |
| 1099 | 9 Mtr. Long Pole( ST-540 SP33) |
| 1100 | 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 1101 | GI Channel/Angle/Flat of sizes including clamps |
| 1102 | Galvinized Nuts and Bolts. |
| 1103 | Earthing of substation --Excavation of earth pit of dia 650 mm &depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 75 mmx10 mm & 50mmx6 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover. |
| 1104 | 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 1105 | LT Fuse set |
| 1106 | Danger Plates with Clamps |
| 1107 | Painting of Poles Red Oxide |
| 1108 | Painting of Poles Aluminium Paint |
| 1109 | Sundry items like aluminium lugs, Jumpers, binding Tape |
| 1110 | Permanent restoration of Ramsoo Feeder HT |
| 1111 | 9 Mtr ST pole (ST-410 SP 33) |
| 1112 | MS Cross Arm with top bracket including Clamp |
| 1113 | MS Channel x-Arm including Clamps and braces |
| 1114 | 11 KV Polymer Composite Pin Insulator |
| 1115 | 30 mm Sq ACSR Conductor |
| 1116 | 11 KV Polymer Composite Disc Insulator |
| 1117 | Galvanized Nuts and Bolts |
| 1118 | Danger Plates with Clamps |
| 1119 | Anti Climb Device With Clamp |
| 1120 | Earthing of Pole |
| 1121 | Red Oxide |
| 1122 | Aluminnium Paint |
| 1123 | Galvanised Stay Set Complete |
| 1124 | Permanent restoration of Ramsoo Feeder LT |
| 1125 | 8 Mtr ST pole (ST-410 SP 33) |
| 1126 | Clamp for Shakle Insulator |
| 1127 | 30 mm Sq ACSR Conductor |
| 1128 | 16 kN Polymer Shakle Insulator |
| 1129 | Galvanized Nuts and Bolts |
| 1130 | Danger Plates |
| 1131 | Earthing of Pole |
| 1132 | Red Oxide |
| 1133 | Aluminnium Paint |
| 1134 | Galvanized Stay Sey Complete |
| 1135 | Creation of 25 KVA sub-station on Ramsoo feeder for Permanat Restoration |
| 1136 | 11/0.433-0.250KV;50Hz), 25 KVA Aluminium Wound Distribution Transformer of latest Energy Efficiency Level-2 (New), IS1180 Part-I; 2014 as per latest upto date amendment |
| 1137 | Gapless Surge Arrestor,9 KV ,10 KA ,LA with (polymer/porcelain) housing, Stn. Type |
| 1138 | 11 kV G.O AB Switch , 3-phase, 3 pole 200 Amp. Vertical type |
| 1139 | 11 kV Horn Gap Fuse Set 3 Phase 3 pole, 200 Amp |
| 1140 | 25 mm² Single-Core Cable,1.1kV Grade, PVC Insulated Stranded Conductor FRLS type |
| 1141 | 9 Mtr. Long Pole( ST-540 SP33) |
| 1142 | 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 1143 | GI Channel/Angle/Flat of sizes including clamps |
| 1144 | Galvinized Nuts and Bolts. |
| 1145 | Earthing of substation --Excavation of earth pit of dia 650 mm &depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 75 mmx10 mm & 50mmx6 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover. |
| 1146 | 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 1147 | LT Fuse set |
| 1148 | Danger Plates with Clamps |
| 1149 | Painting of Poles Red Oxide |
| 1150 | Painting of Poles Aluminium Paint |
| 1151 | Sundry items like aluminium lugs, Jumpers, binding Tape |
| 1152 | Permanent restoration of Old Ukhral Feeder HT |
| 1153 | 9 Mtr ST pole (ST-410 SP 33) |
| 1154 | MS Cross Arm with top bracket including Clamp |
| 1155 | MS Channel x-Arm including Clamps and braces |
| 1156 | 11 KV Polymer Composite Pin Insulator |
| 1157 | 30 mm Sq ACSR Conductor |
| 1158 | 11 KV Polymer Composite Disc Insulator |
| 1159 | Galvanized Nuts and Bolts |
| 1160 | Danger Plates with Clamps |
| 1161 | Anti Climb Device With Clamp |
| 1162 | Earthing of Pole |
| 1163 | Red Oxide |
| 1164 | Aluminnium Paint |
| 1165 | Galvanised Stay Set Complete |
| 1166 | Permanent restoration of Old Ukhral Feeder LT |
| 1167 | 8 Mtr ST pole (ST-410 SP 33) |
| 1168 | Clamp for Shakle Insulator |
| 1169 | 30 mm Sq ACSR Conductor |
| 1170 | 16 kN Polymer Shakle Insulator |
| 1171 | Galvanized Nuts and Bolts |
| 1172 | Danger Plates |
| 1173 | Earthing of Pole |
| 1174 | Red Oxide |
| 1175 | Aluminnium Paint |
| 1176 | Galvanized Stay Sey Complete |
| 1177 | Creation of 25 KVA sub-station on Old Ukhral feeder for Permanat Restoration |
| 1178 | 11/0.433-0.250KV;50Hz), 25 KVA Aluminium Wound Distribution Transformer of latest Energy Efficiency Level-2 (New), IS1180 Part-I; 2014 as per latest upto date amendment |
| 1179 | Gapless Surge Arrestor,9 KV ,10 KA ,LA with (polymer/porcelain) housing, Stn. Type |
| 1180 | 11 kV G.O AB Switch , 3-phase, 3 pole 200 Amp. Vertical type |
| 1181 | 11 kV Horn Gap Fuse Set 3 Phase 3 pole, 200 Amp |
| 1182 | 25 mm² Single-Core Cable,1.1kV Grade, PVC Insulated Stranded Conductor FRLS type |
| 1183 | 9 Mtr. Long Pole( ST-540 SP33) |
| 1184 | 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 1185 | GI Channel/Angle/Flat of sizes including clamps |
| 1186 | Galvinized Nuts and Bolts. |
| 1187 | Earthing of substation --Excavation of earth pit of dia 650 mm &depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 75 mmx10 mm & 50mmx6 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover. |
| 1188 | 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 1189 | LT Fuse set |
| 1190 | Danger Plates with Clamps |
| 1191 | Painting of Poles Red Oxide |
| 1192 | Painting of Poles Aluminium Paint |
| 1193 | Sundry items like aluminium lugs, Jumpers, binding Tape |
| 1194 | Permanent restoration of Nachlana Feeder HT |
| 1195 | 9 Mtr ST pole (ST-410 SP 33) |
| 1196 | MS Cross Arm with top bracket including Clamp |
| 1197 | MS Channel x-Arm including Clamps and braces |
| 1198 | 11 KV Polymer Composite Pin Insulator |
| 1199 | 30 mm Sq ACSR Conductor |
| 1200 | 11 KV Polymer Composite Disc Insulator |
| 1201 | Galvanized Nuts and Bolts |
| 1202 | Danger Plates with Clamps |
| 1203 | Anti Climb Device With Clamp |
| 1204 | Earthing of Pole |
| 1205 | Red Oxide |
| 1206 | Aluminnium Paint |
| 1207 | Galvanised Stay Set Complete |
| 1208 | Permanent restoration of Nachlana Feeder LT |
| 1209 | 8 Mtr ST pole (ST-410 SP 33) |
| 1210 | Clamp for Shakle Insulator |
| 1211 | 30 mm Sq ACSR Conductor |
| 1212 | 16 kN Polymer Shakle Insulator |
| 1213 | Galvanized Nuts and Bolts |
| 1214 | Danger Plates |
| 1215 | Earthing of Pole |
| 1216 | Red Oxide |
| 1217 | Aluminnium Paint |
| 1218 | Galvanized Stay Sey Complete |
| 1219 | Creation of 25 KVA sub-station on Nachlana .feeder for Permanat Restoration |
| 1220 | 11/0.433-0.250KV;50Hz), 25 KVA Aluminium Wound Distribution Transformer of latest Energy Efficiency Level-2 (New), IS1180 Part-I; 2014 as per latest upto date amendment |
| 1221 | Gapless Surge Arrestor,9 KV ,10 KA ,LA with (polymer/porcelain) housing, Stn. Type |
| 1222 | 11 kV G.O AB Switch , 3-phase, 3 pole 200 Amp. Vertical type |
| 1223 | 11 kV Horn Gap Fuse Set 3 Phase 3 pole, 200 Amp |
| 1224 | 25 mm² Single-Core Cable,1.1kV Grade, PVC Insulated Stranded Conductor FRLS type |
| 1225 | 9 Mtr. Long Pole( ST-540 SP33) |
| 1226 | 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 1227 | GI Channel/Angle/Flat of sizes including clamps |
| 1228 | Galvinized Nuts and Bolts. |
| 1229 | Earthing of substation --Excavation of earth pit of dia 650 mm &depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 75 mmx10 mm & 50mmx6 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover. |
| 1230 | 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 1231 | LT Fuse set |
| 1232 | Danger Plates with Clamps |
| 1233 | Painting of Poles Red Oxide |
| 1234 | Painting of Poles Aluminium Paint |
| 1235 | Sundry items like aluminium lugs, Jumpers, binding Tape |
| 1236 | Galvanised Stay Set Complete Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
