Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Part -'A 'Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge:2.1.1 All kinds of soil |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 3 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 4 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls5.9.16.1 Under 20 cm wide |
| 7 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 8 | Neat cement punning. |
| 9 | Providing and fixing Air Walker make of Arihant/ Grand Slam/ Ok Play/Outdoor Effect with below specifications:1.Dimensions (LxWxH): 1100 x 450 x 1300mm2.Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of approved make.3.‘U’ shaped main frame of NB 80mm (G.I.) ‘C’ Class Pipe, Leg Support frame of NB 50mm (G.I.) ‘C’ Class Pipe.4.Handle frame pipes of NB 32mm (G.I.) ‘C’ Class. (‘NB’ stands for Nominal Bore i.e., Internal Diameter of pipe in millimeters)5.All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints.6.All joints of pipe are robotic type welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.7.Zinc primer paint is applied at all the welding points prior to finishing.8.Base plate cover made of virgin LLDPE plastic by rotational molding with minimum 4.00mm thickness, UV resistant and colored.9.Foothold made of Co-Polymer Plastic with rounded edges to prevent impact and injury.10. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured.11. The equipment are fitted with inbuilt limiters to prevent unwanted movements.12. The equipment is fixed on ground with concrete of minimum strength M-25 (Concrete work shall be paid separately)13. A M.S foundation stand fixed in C:C block of size 88mm dia & 550mm long welded 1 no. M.S. plate of size 250mm dia & 10mm thick and 1 no. bottom plate of size 150x150mm x4mm thick to hold the equipments.14. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover.15. High tensile steel with galvanized nut bolts are used for assembly.16. Equipment made to EN 16630, ISO 14001, ISO 9001International standard for outdoor fitness equipment. SelfExplanatory stainless steel label fixed on equipment for ease of use. Cost of each equipment including comprehensive maintenance for 1 year. |
| 10 | Providing and fixing Sit Up Station in a pair make of Arihant/ Grand Slam/ Ok Play/Outdoor Effect with below specifications:1.Dimensions (LxWxH): 1500 x 1150 x 650mm2.Fabricated with main frame of NB 100mm (G.I.) ‘C’ Class Pipe of approved make.3.Main frame of NB 25mm (G.I.) ‘C’ Class Pipe.4.Leg support of NB 65mm (G.I.) ‘C’ Class Pipe. (‘NB’ stands for Nominal Bore i.e., Internal Diameter of pipe in millimeters)5.Perforated MS Sheet for Back Support.6.The back support Fixed on its top is made of perforated MS sheet of 2mm thickness.7.All pipes are powder coated using Akzo Nobel or equivalent Paint of 80 -120 micron thick.8.All joints of pipe are robotic type welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.9.Zinc primer paint is applied at all welding points prior to finishing.10. Base plate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and colored.11. The equipment is fixed on ground with concrete of minimum strength M -25 (Concrete work shall be paid separately)12. A M.S foundation stand fixed in C:C block of size 88mm dia & 550mm long welded 1 no. M.S. plate of size 250mm dia & 10mm thick and 1 no. bottom plate of size 150x150mm x4mm thick to hold the equipments.13. Once the concrete is set, the equipment is fixed on to it.14. High tensile steel with galvanized nut bolts are used for assembly.15. Equipment made to EN 16630, ISO 14001, ISO 9001International standard for outdoor fitness equipment.16. Self-Explanatory stainless steel label fixed on equipment for ease of use.Cost of each equipment including comprehensive maintenance for 1 year. |
| 11 | Providing and fixing Horse Rider Station make of Arihant/ Grand Slam/ Ok Play/Outdoor Effect with below specifications:1.Dimensions (LxWxH): 1000 x 600 x 1100 mm2.Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of approved make3.Main frame of NB 65mm (G.I.) ‘C’ Class Pipe.4.Handle support frame of NB 50mm (G.I.) ‘C’ Class Pipe and other pipes of NB 32mm & NB 25mm (G.I.) ‘C’ Class Pipe. (‘NB’ stands for Nominal Bore i.e., Internal Diameter of pipe in millimeters)5.All Pipes are powder coated with 80 -120 micron thick AkzoNobel or equivalent Paints.6.All joints of pipe are robotic type welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.7.Zinc primer paint is applied at all the welding points prior to finishing.8.Base plate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and colored.9.Foothold made of NB 32mm (G.I.) ‘C’ Class Pipe.10. Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00 mm thickness, colored, UVresistant and environmental friendly.11. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipmentmanufactured.12. The equipment are fitted with inbuilt limiters to prevent unwanted movements.13. The equipment is fixed on ground with concrete of minimum strength M -25 (Concrete work shall be paid separately)14. A M.S foundation stand fixed in C:C block of size 88mm dia & 550mm long welded 1 no. M.S. plate of size 250mm dia & 10mm thick and 1 no. bottom plate of size 150x150mm x4mm thick to hold the equipments.15. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover.16. High tensile steel with galvanized nut bolts are used for assembly.17. Equipment made to EN 16630, ISO 14001, ISO 9001International standard for outdoor fitness equipment.18. Self-Explanatory stainless steel label fixed on equipment for ease of use.Cost of each equipment including comprehensive maintenance for 1 year. |
| 12 | Providing and fixing Leg Press in a pair make of Arihant/ Grand Slam/ Ok Play/Outdoor Effect with below specifications:1.Dimensions (LxWxH): 2000 x 550 x 1600 mm2.Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of approved make.3.Seat Main frame of NB 50mm (G.I.) ‘C’ Class Pipe and Pipe connecting main post to seat main frame of NB 65mm (G.I.) ‘C’ Class Pipe. (‘NB’ stands for Nominal Bore i.e., Internal Diameter of pipe in millimeters)4.All Pipes are powder coated with 80 -120 micron thick AkzoNobel or equivalent Paints.5.All joints of pipe are robotic type welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.6.Zinc primer paint is applied at all the welding points prior to finishing.7.Base plate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and colored.8.Foothold made of NB 50mm (G.I.) ‘C’ Class Pipe.9.Seats made up from virgin LLDPE manufactured by rotational molding with 4.00 mm thickness, colored, UV resistant and environmental friendly.10. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured.11. The equipment are fitted with inbuilt limiters to prevent unwanted movements.12. The equipment is fixed on ground with concrete of minimum strength M -25 (Concrete work shall be paid separately)13. A M.S foundation stand fixed in C:C block of size 88mm dia & 550mm long welded 1 no. M.S. plate of size 250mm dia & 10mm thick and 1 no. bottom plate of size 150x150mm x4mm thick to hold the equipments.14. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover.15. High tensile steel with galvanized nut bolts are used for assembly.16. Equipment made to EN 16630, ISO 14001, ISO 9001International standard for outdoor fitness equipment.17. Self-Explanatory stainless steel label fixed on equipment for ease of use. Cost of each equipment including comprehensive maintenance for 1 year. |
| 13 | Providing and fixing Pull Chair in a pair make of Arihant/ Grand Slam/ Ok Play/Outdoor Effect with below specifications: 1.Dimensions (LxWxH): 2400 x 800 x 2000 mm2.Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of approved make3.Seat main frame of NB 50mm (G.I.) ‘C’ Class Pipe, Pipe connecting main post with handle frame of NB 65mm (G.I.) ‘C’ Class Pipe.4.Handle frame of NB 32mm (G.I.) ‘C’ Class Pipe. ‘NB’ stands for Nominal Bore i.e., Internal Diameter of pipe inmillimeters)5.All Pipes are powder coated with 80 -120 micron thick AkzoNobel or equivalent Paints.6.All joints of pipe are robotic type welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.7.Zinc primer paint is applied at all the welding points prior to finishing.8.Handle bars are provided with high end quality rubber grips.9.Base plate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and colored.10. Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00 mm thickness, colored, UV resistant and environmental friendly.11. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured.12. The equipment are fitted with inbuilt limiters to prevent unwanted movements.13. The equipment is fixed on ground with concrete of minimum strength M -25 (Concrete work shall be paid separately).14. A M.S foundation stand fixed in C:C block of size 88mm dia & 550mm long welded 1 no. M.S. plate of size 250mm dia & 10mm thick and 1 no. bottom plate of size 150x150mm x4mm thick to hold the equipments.15. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover.16. High tensile steel with galvanized nut bolts are used for assembly.17. Equipment made to EN 16630, ISO 14001, ISO 9001International standard for outdoor fitness equipment.18. Self-Explanatory stainless steel label fixed on equipment for ease of use. Cost of each equipment including comprehensive maintenance for 1 year. |
| 14 | Providing and fixing Seated Chest Press in a pair make of Arihant/ Grand Slam/ Ok Play/Outdoor Effect with belowspecifications:1.Dimensions (LxWxH): 1800 x 700 x 2000 mm2.Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of approved make3.Seat Main frame of NB 50mm (G.I.) ‘C’ Class Pipe.4.Handle frame of NB 32mm and NB 25mm (G.I.) ‘C’ Class Pipe. (‘NB’standsfor Nominal Bore Size i.e., Internal Diameter of pipe in millimeters).5.All Pipes are powder coated with 80 -120 micron thick AkzoNobel or equivalent Paints.6.All joints of pipe are robotic type welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.7.Zinc primer paint is applied at all the welding points prior to finishing.8.Handle bars are provided with high end quality rubber grips.9.Base plate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and colored.10. Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00 mm thickness, colored, UV resistant and environmental friendly.11. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured.12. The equipment are fitted with inbuilt limiters to prevent unwanted movements.13. The equipment is fixed on ground with concrete of minimum strength M -25 (Concrete work shall be paid separately).14. A M.S foundation stand fixed in C:C block of size 88mm dia & 550mm long welded 1 no. M.S. plate of size 250mm dia & 10mm thick and 1 no. bottom plate of size 150x150mm x4mm thick to hold the equipments.15. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover.16. High tensile steel with galvanized nut bolts are used for assembly.17. Equipment made to EN 16630, ISO 14001, ISO 9001International standard for outdoor fitness equipment.18. Self-Explanatory stainless steel label fixed on equipment for ease of use. Cost of each equipment including comprehensive maintenance for 1 year. |
| 15 | Providing and fixing Arm Wheel in a pair make of Arihant/ Grand Slam/ Ok Play/Outdoor Effect with below specifications:1. Dimensions (LxWxH): 850 x 800 x 1800 mm2. Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of approved make.3.Wheel frame of NB 32mm with connecting spokes of NB 25mm, Pipe connecting main pilar with wheel frame of NB 50mm. All pipes must be (G.I.) ‘C’ Class Pipes (‘NB’ stands for Nominal Bore Size i.e., Internal Diameter of pipe in millimeters).4. All Pipes are powder coated with 80 –120 -micron thick AkzoNobel or equivalent Paints.5. All joints of pipe are robotic type welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.6. Zinc primer paint is applied at all the welding points prior to finishing.7.Base plate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and colored.8. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured.9. The equipment is fixed on ground with concrete of minimum strength M -25 (Concrete work shall be paid separately).10. A M.S foundation stand fixed in C:C block of size 88mm dia & 550mm long welded 1 no. M.S. plate of size 250mm dia & 10mm thick and 1 no. bottom plate of size 150x150mm x4mm thick to hold the equipments.11. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover.12. High tensile steel with galvanized nut bolts are used for assembly.13. Equipment made to EN 16630, ISO 14001, ISO 9001International standard for outdoor fitness equipment.14. Self-Explanatory stainless steel label fixed on equipment for ease of use.Cost of each equipment including comprehensive maintenance for 1 year. |
| 16 | Providing and fixing Double Cross Walker make of Arihant/ Grand Slam/ Ok Play/Outdoor Effect with below specifications:1. Dimensions (LxWxH): 1600 x 600 x 1600 mm2. Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of approved make.3. Handle main frame of NB 50mm and other connecting pipes of NB 32mm and NB 25mm (G.I.) ‘C’ Class Pipe. (‘NB’ stands for Nominal Bore Size i.e., Internal Diameter of pipe in millimeters).4. Foot support frame of 96 x 46 x 3mm MS rectangular pipe.5. All Pipes are powder coated with 80 -120 micron thick AkzoNobel or equivalent Paints.6. All joints of pipe are robotic type welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.7. Zinc primer paint is applied at all the welding points prior to finishing.8.Base plate cover made of virgin LLDPE plastic by rotational molding with minimum 4.00mm thickness, UV resistant and colored.9. Foothold made of Co -Polymer Plastic with rounded edges to prevent impact and injury.10. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured.11. The equipment are fitted with inbuilt limiters to prevent unwanted movements.12. The equipment is fixed on ground with concrete of minimum strength M -25 (Concrete work shall be paid separately).13. A M.S foundation stand fixed in C:C block of size 88mm dia & 550mm long welded 1 no. M.S. plate of size 250mm dia & 10mm thick and 1 no. bottom plate of size 150x150mm x4mm thick to hold the equipments.14. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover.15. High tensile steel with galvanized nut bolts are used for assembly.16. Equipment made to EN 16630, ISO 14001, ISO 9001International standard for outdoor fitness equipment.17. Self-Explanatory stainless steel label fixed on equipment for ease of use.Cost of each equipment including comprehensive maintenance for 1 year. |
| 17 | Providing and fixing Triple Twister make of Arihant/ Grand Slam/ Ok Play/Outdoor Effect with below dimensions:1. Dimensions (LxWxH): 1300 x 1300 x 1650 mm2. Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of approved make.3. Handle Main frame of NB 32mm (G.I.) ‘C’ Class Pipe.4. Handle frame spokes of NB 25mm (G.I.) ‘C’ Class Pipe. (‘NB’ stands for Nominal Bore Size i.e., Internal Diameter of pipe in millimeters).5. Foothold plate of made of MS Sheet Metal of 3mm thickness.6. All Pipes are powder coated with 80 -120 micron thick AkzoNobel or equivalent Paints.7. All joints of pipe are robotic type welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.8. Zinc primer paint is applied at all the welding points prior to finishing.9. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured.10. The equipment is fixed on ground with concrete of minimum strength M -25 (Concrete work shall be paid separately).11. A M.S foundation stand fixed in C:C block of size 88mm dia & 550mm long welded 1 no. M.S. plate of size 250mm dia & 10mm thick and 1 no. bottom plate of size 150x150mm x4mm thick to hold the equipments.12. Once the concrete is set, the equipment is fixed on to it.13. High tensile steel with galvanized nut bolts are used for assembly.14. Equipment made to EN 16630, ISO 14001, ISO 9001International standard for outdoor fitness equipment.15. Self-Explanatory stainless steel label fixed on equipment for ease of use.Cost of each equipment including comprehensive maintenance for 1 year. |
| 18 | Providing and fixing Rowing Machine make of Arihant/ Grand Slam/ Ok Play/Outdoor Effect with below specifications:1. Dimensions (LxWxH): 1250 x 800 x 1150 mm2. Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of approved make.3. Main frame of NB 65mm (G.I.) ‘C’ Class Pipe.4. Handle support frame of NB 25mm (G.I.) ‘C’ Class Pipe. (‘NB’ stands for Nominal Bore Size i.e., Internal Diameter of pipe in millimeters).5. All Pipes are powder coated with 80 -120 micron thick AkzoNobel or equivalent Paints.6. All joints of pipe are robotic type welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.7. Zinc primer paint is applied at all the welding points prior to finishing.8.Base plate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and colored.9. Foothold made of NB 50mm (G.I.) ‘C’ Class Pipe.10. Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00 mm thickness, colored, UVresistant and environmental friendly.11. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured.12. The equipment are fitted with inbuilt limiters to prevent unwanted movements.13. The equipment is fixed on ground with concrete of minimum strength M -25 (Concrete work shall be paid separately).14. A M.S foundation stand fixed in C:C block of size 88mm dia & 550mm long welded 1 no. M.S. plate of size 250mm dia & 10mm thick and 1 no. bottom plate of size 150x150mm x4mm thick to hold the equipments.15. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover.16. High tensile steel with galvanized nut bolts are used for assembly.17. Equipment made to EN 16630, ISO 14001, ISO 9001International standard for outdoor fitness equipment.18. Self-Explanatory stainless steel label fixed on equipment for ease of use. Including maintenance cost for 1 years. |
| 19 | Providing and fixing Weight Assisted Shoulder Press make of Arihant/ Grand Slam/ Ok Play/Outdoor Effect with belowspecifications:1. Weight Assisted Shoulder Press of minimum size 1350x1600x1150mm2. fabricated with main post of G.I. ‘C’ Class of NB 65 mm and other support and handle frames of NB 50 mm G.I. ‘ C’ Class pipes only. Joints scalloped as necessary and dressed off removing sharp edges and burrs.3. Zinc primer paint shall be applied at all welding points prior to finishing.4. Handle support frame made of GI 'C' Class Pipe of NB 25 mm. Handle bars shall be provided with high quality rubber grip.5. All Pipes are powder coated with 80 -120 micron thick AkzoNobel or equivalent Paints. Machine to have weight plate adjustment arrangement made of 304 grade stainless steel and it must be designed to prevent theft of weight plates.6. Plates have to be fully locked in the machine but movable for the adjustment. Weight Change system should allow user to freely change resistance by changing individual weight plate of each arm.7. Weight on each arm should be adjustable between 0 -15kgs. Seats to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of 4.00 mm, colourful and UV resistant and environmental friendly.8. Bearing used shall be maintenance free, duly oil sealed and self-lubricated of SKF / equivalent make as approved by Engineer in charge.9. Equipment to be fitted with inbuilt limiters to prevent unwanted movement.10.All open ends of pipe to be closed by GI/ LLDPE caps or sealed in for user safety.11. The equipment shall be fixed on ground with concrete of minimum strength M -25 (Concrete work shall be paidseparately).12.A M.S foundation stand fixed in C:C block of size 88mm dia & 550mm long welded 1 no. M.S. plate of size 250mm dia & 10mm thick and 1 no. bottom plate of size 150x150mm x4mm thick to hold the equipments.13.galvanized rod and covered with base plate cover after the installation complete.14.Equipment made to EN 16630, ISO 14001, ISO 9001International standard for outdoor fitness equipment.15.Self-Explanatory stainless steel label shall be fixed on equipment for ease of use. Cost of each equip |
| 20 | Providing and fixing Weight Assisted Chest Press make of Arihant/ Grand Slam/ Ok Play/Outdoor Effect with belowspecifications:1. Weight Assisted Chest Press of minimum size 1100x1500x1300mm2. fabricated with main post of G.I. ‘ C’ Class of NB 65 mm and other support and handle frames of NB 50 mm G.I. ‘ C’ Class pipes only. Joints scalloped as necessary and dressed off removing sharp edges and burrs.3. Zinc primer paint shall be applied at all welding points prior to finishing. Handle support frame made of GI 'C' Class Pipe of NB 25 mm.4. Handle bars shall be provided with high quality rubber grip. All Pipes are powder coated with 80 -120 micron thick AkzoNobel or equivalent Paints.5. Machine to have weight plate adjustment arrangement made of 304 grade stainless steel and it must be designed to prevent theft of weight plates.6. Plates have to be fully locked in the machine but movable for the adjustment. Weight Change system should allow user to freely change resistance by changing individual weight plate of each arm.7. Weight on each arm should be adjustable between 0 -15kgs. Seats to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of 4.00 mm, colourful and UV resistant and environmental friendly.8. Bearing used shall be maintenance free, duly oil sealed and self-lubricated of SKF / equivalent make as approved by Engineer in charge.9. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps or sealed in for user safety.10. The equipment shall be fixed on ground with concrete of minimum strength M -25 (Concrete work shall be paid separately).11.A M.S foundation stand fixed in C:C block of size 88mm dia & 550mm long welded 1 no. M.S. plate of size 250mm dia & 10mm thick and 1 no. bottom plate of size 150x150mm x4mm thick to hold the equipments.12.galvanized rod and covered with base plate cover after the installation complete.13.Equipment made to EN 16630, ISO 14001, ISO 9001International standard for outdoor fitness equipment.14.Self-Explanatory stainless steel label shall be fixed on equipment for ease of use.Cost of each equipment including comprehensive maintenance for 1 year. |
| 21 | Providing and fixing Weight Assisted Lat Pull Down make of Arihant/ Grand Slam/ Ok Play/Outdoor Effect with belowspecifications:1. Providing, designing and fixing of Weight Assisted Lat Pull Down of minimum size 1200x1300x1650mm2. fabricated with main post of G.I. ‘ C’ Class of NB 65 mm and other support and handle frames of NB 50 mm G.I. ‘ C’ Class pipes only. Joints scalloped as necessary and dressed off removing sharp edges and burrs.3. Zinc primer paint shall be applied at all welding points prior to finishing.4. Handle support frame made of GI 'C' Class Pipe of NB 25 mm. Handle bars shall be provided with high quality rubber grip.5. All Pipes are powder coated with 80 -120 micron thick AkzoNobel or equivalent Paints. Machine to have weight plate adjustment arrangement made of 304 grade stainless steel and it must be designed to prevent theft of weight plates.6. Plates have to be fully locked in the machine but movable for the adjustment. Weight Change system should allow user to freely change resistance by changing individual weight plate of each arm.7. Weight on each arm should be adjustable between 0 -15kgs. Seats to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of 4.00 mm, colourful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self-lubricated of SKF / equivalent make as approved by Engineer in charge.8. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps or sealed in for user safety.9. The equipment shall be fixed on ground with concrete of minimum strength M -25 (Concrete work shall be paid separately).10. A M.S foundation stand fixed in C:C block of size 88mm dia & 550mm long welded 1 no. M.S. plate of size 250mm dia & 10mm thick and 1 no. bottom plate of size 150x150mm x4mm thick to hold the equipments.11. galvanized rod and covered with base plate cover after the installation complete.12. Equipment made to EN 16630, ISO 14001, ISO 9001International standard for outdoor fitness equipment.13. Self-Explanatory stainless steel label shall be fixed on equipment for ease of use.Cost of each equipment including comprehensive maintenance for 1 year. |
| 22 | Providing & Fixing Wave Ladde make of Arihant/ Grand Slam/ Ok Play/Outdoor Effect. MAIN BODY : -32 MM N B GI PIPE.SUPPORT :- 25 MM NB GI PIPE. THE TOPCOAT IS DULY POWDER COATED. It Shall Have Main Frame Made Of 32 Mm G.I Pipe With Steps Made From 25 Mm G.I Pipe The Pipes Shall Be Powder Coated To Prevent Rusting And For Aesthetic Look. Coating With Pure Polymer Powder With 7 Tank Treatment 60 To 70 Micron Thickness. The Holding Down/Fixing Of Equipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size) All complete as per the direction of engineer In charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, cc block 1:2:4 (1 cement:2 coarse sand :4 graded stone aggregate 20mm nominal size ) of required size as per department / manufacturers specifications and guidelines including maintenance cost for 1st Year. For the laying of foundation of equipment c:c work shall be paid separately. Cost of each equipment including comprehensive maintenance for 1 year. |
| 23 | Providing & Installing FRP Wave Slide make of Arihant/ Grand Slam/ Ok Play/Outdoor Effect. Wave Slide 4.00 Mtr. : This FRP Wave Slide consists of ISI marked structure. The attractive FRP Wave Slide chute is made up of high quality FRP (Fiber Reinforced Plastic) material. The structure is made up of 20 Nb and 25 Nb powder coated G.I pipes. The slide is supported on 80 Nb powder coated G.I pipes. The ladder cum railing is made 20 Nb and 25 Nb G.I pipes respectively. The platform of the slide is made up of 14 Swg G.I sheet with anti -skid for firm foot grip. There are triangular steps 16 Swg G.I sheet. The slide chute has its end such as it causes safe landing of the child. All complete as per the direction of engineer In charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, cc block 1:2:4 (1 cement:2 coarse sand :4 graded stone aggregate 20mm nominal size ) of required size as per department / manufacturers specifications and guidelines including maintenance cost for 1st Year. For the laying of foundation of equipment c:c work shall be paid separately. Cost of each equipment including comprehensive maintenance for 1 year. |
| 24 | . Providing & Installing Criss Cross Scrambler make of Arihant/ Grand Slam/ Ok Play/Outdoor Effect. This is very simple type of structure similar to the shape of the ladder arranged in criss cross manner. The main frame of this criss cross scrambler is fabricated from 25 NB powder coated GI pipe. There is one center support of 40 NB GI pipe and horizontal bars of 20 NB pipe. The pipes are powder coated to prevent rusting due to atmospheric condition. All complete as per the direction of engineer In charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, cc block 1:2:4 (1 cement:2 coarse sand :4 graded stone aggregate 20mm nominal size ) of required size as per department / manufacturers specifications and guidelines including maintenance cost for 1st Year. For the laying of foundation of equipment c:c work shall be paid separately. Cost of each equipment including comprehensive maintenance for 1 year. |
| 25 | Providing & fixing Four -Seater Arch Swing make of Arihant/ Grand Slam/ Ok Play/Outdoor Effect. The four -seater arch swing included 80NB Pipe bended & welded together form a strong frame with stand both the pitching & yawing moment. The flange & ISA 80NB pip is hot dip galvanized pipe of height 2900mm conforming to IS 1239 with GI thickness of 60m 50NB Top Pipe with two Arc Swing Flanges welded at both its ends. The Pipe can with standing tensional stress created due to swinging motion. These 50NB top pipes (2 nos. for Four Seater Arc Swing) are hot dip galvanized pipe of length 2950mm conforming to IS 1239 with GI thickness of 60 mm Special swing clamps made up of two parts are joined together with M6 Allen bolts along with S-Hook & a specially designed swing pin. The S-Hook is specially designed to house a bearing for smooth & noiseless swinging. The clamps are made from injection moulded Nylon - 6, plastic, S-Hook of dia 8 mm & 145x130 Triangular hook, Grade SS 304 Rubber dip moulded swing chain of dia. 6mm & 1450mm Long. Moulded Rubber Seat tested for testing rubber hardness as per Shore Durometer Type A scale conforming ASTM D2240 having value of approx. 50. All complete as per the direction of engineer In charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, cc block 1:2:4 (1 cement:2 coarse sand :4 graded stone aggregate 20mm nominal size ) of required size as per department / manufacturers specifications and guidelines including maintenance cost for 1st Year. For the laying of foundation of equipment c:c work shall be paid separately. Cost of each equipment including comprehensive maintenance for 1 year. |
| 26 | Providing & Installing A Swing Combo make of Arihant/ Grand Slam/ Ok Play/Outdoor Effect. size 3.10x1.50mtr. Main Frame:- Main Cross Bar made of round 75mm O.D. pipe and legs made of 8Omm N.B. pipe Legs - Arch shaped bended (Must be min in GI\\"B class pipe). T pipe will be required for the Cross bar. All the pipes should be ISI marked as per the IS 1239/2004) & of reputed brand. Ensuring the Strength, durability, stability & PAN long life to the Kids. structure with safety as paramount. Seats - Belt & toddler bucket Type Seats made of Synthetic Rubberized material/Fiber reinforced fabric materials of Virgin Reinforced material & also duly with UV resistant colors, Chain Made of approx 6mm thick GI chain with rubberized coating of with 3 mm minimum thickness, Chorme plated supporting hook for belts Hooks for convenience & height adjustment/ Seat Movement, self-lubricated council type bush baring clamps provided with rubber coated chain to be hang the complete belt assembly. The complete structure double art swing should be powder coated with minimum powder coating thickness of 60 -80 microns. Accessories: Nut bolts to be used All approved GI nut bolts Galvanised Iron with High tensile Strength. Kid capacity 2 -4 Nos. All complete as per the direction of engineer In charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, cc block 1:2:4 (1 cement:2 coarse sand :4 graded stone aggregate 20mm nominal size ) of required size as per department / manufacturers specifications and guidelines including maintenance cost for 1st Year. For the laying of foundation of equipment c:c work shall be paid separately. Cost of each equipment including comprehensive maintenance for 1 year. |
| 27 | Providing & Installing Sea Saw Double make of Arihant/ Grand Slam/ Ok Play/Outdoor Effect. size 2.0x2.50mtr.Main Frame: made of see saw made of 50mm NB pipe with planks made of 40mm NB pipe and supports made of 20mm N.B. pipe, all the G.I pipes should be \\"B\\" class & ISI marked (as per the IS 1239/2004)& of reputed brand make & Ensuring the Strength, durability, stability & long life to the kids structure with safety as paramount. Seats - Seat Made of FRP (Fiber Reinforced Plastic), duly UV resistant colors, all chemicals in the FRP material should be best quality, the Fiber Mat of 450GSM to be used for strength & stability with supporting frame. FRP Seat size (approx.) 10\\"(L) x 8\\" (W) with back rest. The complete structure see saw double should be powder coated with minimum powder coating thickness of 60 -80 microns Accessories: Nut bolts - All approved Gl nut bolts Galvanized Iron with High tensile Strength Kid capacity 4 nos. Complete as per drawings attached. All complete as per the direction of engineer In charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, cc block 1:2:4 (1 cement:2 coarse sand :4 graded stone aggregate 20mm nominal size ) of required size as per department / manufacturers specifications and guidelines including maintenance cost for 1st Year. For the laying of foundation of equipment c:c work shall be paid separately. Cost of each equipment including comprehensive maintenance for 1 year. |
| 28 | Providing & Installing Mini Play House make of Arihant/ Grand Slam/ Ok Play/Outdoor Effect. size 6.0x1.80mtr with Slide. Main Frame made of Round 80 NB Pipe Having min \\"B\\" class G.J. pipe. All the pipes should be ISI Marked (as per the IS 1239/2004) & of reputed brand. Ensuring the strength. Durability, stability & long life to the kids structure with safety as paramount Deck having 1035mm x 1035mm with collar of 65mm size made of perforated sheet. Hydraulic Precision punched holes made of min 6mm NB with sheet thickness of approx. 2.5mm. Components: - FRP (Fiber Reinforced Plastic) Main Sunshine Line designer Roof having min 2 - 4 layers (approx.4mm thickness) with bright colours being UV resistant ladder main frame made of round pipe 25mm NB pipe & Ladder rungs made of 15mm N.B. pipe having width of 400min a 70mm(approx.). All the pipes should be ISI marked (as per the IS1239/2004 ) & of reputed brand. Tree climber made of main frame pipe of 25mm NB round pipe & rungs made of 20min NB round pipe. All the pipes should ben ISI marked (as per the IS 1239/2004) & of reputed brand Spring coil climber: made of main frame pipe of 25mm NB round pipe & springs made of 20mm NB round pipe. All the pipes should be ISI marked (as per the IS. 1239/2004) & of reputed brand. A Rotomolded plastic LLDPE made safety panel with UV stabilized color fading resistant. Having size of 1035mm x 900mm & thickness of 70mm heavy & strong for long term durability & great aesthetic look. Safety panel fitted on M.S round pipe 20mm N.B. with size of Slide having height of 1220mm approx. & length approx. 2.40mtr made of metallic GI sheet of high strength having width of 400mm mounted on M.S angle support of 4 -0x40x4mm & 5nos angle supports & 20mm. N.B. round pipe hand rail, The ladder step of metallic slide should made of M.3 rectangular pipe of 70x23mm in minimum thickness of 2mm with vertical hand rift support of size 20mm N.B GI p:pe with other necessary supporting pipes. The complete structure mini play house should be powder coated with minimum powder coating thickness of 60 -60 microns. Safety panel/top canopy should be also attached with help of colourful nylon clamps. Accessories: Nut bolts - All approved Gl nut bolts Galvanised Iron with High tensile Strength. Kit capacity 2 -8 Nos. All complete as per the direction of engineer In charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, cc block 1:2:4 (1 cement:2 coarse sand :4 graded stone aggregate 20mm nominal size ) of required size as per department / manufacturers specifications and guidelines including maintenance cost for 1st Year. For the laying of foundation of equipment c:c work shall be paid separately. Cost of each equipment including comprehensive maintenance for 1 year. |
| 29 | Providing & Installing of FRP SPIRAL SLIDE 2.1 MTR. make of Arihant/ Grand Slam/ Ok Play/Outdoor Effect. The FRP Spiral Slide chute is made of fiber reinforced plastic having shell thickness of 4 mm. The back side of the slide is of surface metal with platform effect. The slide is supported on 80 mm NB centre G.I. pipe. The landing module is supported by 20 mm NB G.I. pipe. The railing is made up of LLDPE by roto mould process and is supported by 20 mm NB G.I. pipes. The support pipes are powder coated to avoid rusting of the pipes. All sharp edges and corners are properly grinded to give smooth finish so that children are not hurt while playing on it. All complete as per the direction of engineer In charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, cc block 1:2:4 (1 cement:2 coarse sand :4 graded stone aggregate 20mm nominal size ) of required size as per department /manufacturers specifications and guidelines including maintenance cost for 1st Year. For the laying of foundation of equipment c:c work shall be paid separately. Cost of each equipment including comprehensive maintenance for 1 year. |
| 30 | Providing & Installing Of Roto Mini Slide make of Arihant/ Grand Slam/ Ok Play/Outdoor Effect. the centre support of the Mini Slide is made up of 50 NB GI pipe. The slide is made from LLDPE virgin plastic. The thickness of the mini slide is 6 -8 mm with proper finish to support the module. The triangular steps of 16 SWG are provided and the ladder frame is made in 20 NB and 25 NB powder coated GI pipe. The landing support is made up of 25 NB GI pipes. The ladder is designed in such a way there won’t entrap child’s foot while playing. The pure polyester powder coating done on the pipes extends the life of equipment. All complete as per the direction of engineer In charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, cc block 1:2:4 (1 cement:2 coarse sand :4 graded stone aggregate 20mm nominal size ) of required size as per department / manufacturers specifications and guidelines including maintenance cost for 1st Year. For the laying of foundation of equipment c:c work shall be paid separately. Cost of each equipment including comprehensive maintenance for 1 year. |
| 31 | Providing and fixing of precast RCC Benches (chair bench with back rest) using cement concrete M -30 consisting of 2 nos. I -shaped base support of thickness 100 mm having back height 1000 mm, front height 450 mm and base width 620 mm having 5 nos. RCC planks 1500 × 100 × 50 mm in the approved colour and shade. The minimum weight of MS reinforcement bar is 3.4 kg having along the section and periphery of the legs with sufficient no. of 4 mm dia. MS stirrups. Each base support shall have 3 nos. of 12 mm dia. galvanised coupling bolts (2 nos. 40 mm long & one 65 mm long) properly welded suitably to the main reinforcement of each leg and to receive carriage bolts for fixing RCC planks. One of the seat plank (1500 × 100 × 50 mm) shall be engraved in the centre on the back. Minimum weight of MS reinforcement in a 200 mm wide plank is 4.4 kg and in a 100 mm wide 2.9 kg. Each RCC plank shall have 2 holes of 14 mm dia. at appropriate locations for fixing back rest planks with MS studs having one plank of size 1500 × 100 × 50 mm and one plank of size 1500 × 200 × 50 mm shall be bolted into the base support coupling nuts on both sides with 2 nos. 12 mm dia × 65 mm long galvanised steel CSK bolts and nuts of suitable size with EVA and steel washers. Two carriage bolts and nuts of size 165 mm long and 8 mm dia. shall be welded on the back of each base support and coupling nuts provided in situ with cement mortar. Side edges of all the planks shall be painted with acrylic base paint of approved colour and shade and front portion of seating and back rest planks shall be polished to a glossy finish. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including the cost of earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines. |
| 32 | Providing and Fixing SBR (Styrene Butadiene Rubber) tile flooring 24 mm thick with group arrangement of approved colour, design and fixing with P.U. adhesive for reliable and durable bonding with sub-base all complete and as approved by Engineer-incharge. |
| 33 | Add total for DSR Items sr. no. 1 to 8=1367348.98 |
| 34 | Add GST Correction @ correction factor 0.973=1330430.56 |
| 35 | Total=1330430.56 |
| 36 | Add Item from Sr. no. 9 to 32 Quotation Rate=2932540.00 |
| 37 | Total=4262970.56 |
| 38 | Part -'B' |
| 39 | Add for comprehensive warrantee for 1st Year @ free included in Quotation rate |
| 40 | Add for comprehensive warrantee for 2nd Year @ 6 % on estimated cost on A |
| 41 | Add for comprehensive warrantee for 3rd Year @ 10 % on estimated cost on A Please Enable Macros to View BoQ information |
| 42 | Add for comprehensive warrantee for 3rd Year @ 10 % on estimated cost on A Please Enable Macros to View BoQ information |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
