|
| 1 | Foundation |
| 2 | Providing and laying cutting edge of mild steel for well foundation and technical specification. all material, T&P, labour, cartage and all Taxes as applicable complete in all respect as per Drawing and Technical Specifications & as per direction of Engineer-in-charge.MoRTH 12.1 |
| 3 | Plain/Reinforced Cement Concrete in Well Foundation complete all material, T&P, labour, cartage and all Taxes as applicable complete in all respect as per Drawing and Technical Specifications & as per direction of Engineer-in-charge.MoRTH 12.11 |
| 4 | RCC Well Curb in M30 Grade MoRTH 12.11A |
| 5 | RCC Well steining in M30 Grade MoRTH 12.11B |
| 6 | RCC False in M30 MoRTH 12.11B |
| 7 | PCC Bottom Plug in M25 Grade MoRTH 12.11C |
| 8 | PCC Intermediate Plug in M20 Grade MoRTH 12.11D |
| 9 | RCC Well Cap in M30 Grade MoRTH 12.11F |
| 10 | Supplying, fitting and placing HYSD bar reinforcement in foundation complete all material, T&P, labour, cartage and all Taxes as applicable complete in all respect as per Drawing and Technical Specifications & as per direction of Engineer-in-charge. MoRTH 12.04 |
| 11 | Sinking of well (other than pneumatic method of sinking) through all type of strata namely sandy soil, clayey soil and rock as shown against each case , complete as per drawing and technical specifications. Depth of sinking is reckoned form bed level, all material, T&P, labour, cartage and all Taxes as applicable complete in all respect as per Drawing and Technical Specifications & as per direction of Engineer-in-charge. MoRTH 12.12Clay Soil |
| 12 | 0 M to 3 M |
| 13 | 3 M to 10 M |
| 14 | 10 M to 20 M |
| 15 | 20 M to 30 M |
| 16 | Sinking Pier Well Clay Soil |
| 17 | 0 M to 3 M |
| 18 | 3 M to 10 M |
| 19 | 10 M to 20 M |
| 20 | 20 M to 30 M |
| 21 | Sinking above well cap |
| 22 | Sand Filling in Wells complete all material, T&P, labour, cartage and all Taxes as applicable complete in all respect as per Drawing and Technical Specifications & as per direction of Engineer-in-charge.MoRTH 12.21 |
| 23 | SubStructure |
| 24 | Plain/Reinforced Cement Concrete in Sub Structure complete all material, T&P, labour, cartage and all Taxes as applicable complete in all respect as per Drawing and Technical Specifications & as per direction of Engineer-in-charge.MoRTH 13.05 |
| 25 | Pier in M35 Grade |
| 26 | Abutment Column in M 35 Grade |
| 27 | Pier Cap in M35 Grade |
| 28 | Abutment Column Top Beam M35Grade |
| 29 | RCC Pedestal M 45 |
| 30 | Sesmic Arrester M 45 |
| 31 | Back Wall/Wing Wall/Parapet Wall M35 |
| 32 | Supplying, fitting and placing HYSD bar reinforcement in Sub Structure complete all material, T&P, labour, cartage and all Taxes as applicable complete in all respect as per Drawing and Technical Specifications & as per direction of Engineer-in-charge.MoRTH 13.06 |
| 33 | Supplying, fitting and fixing in position true to line and level sliding plate bearing with PTFE surface sliding on stainless steel complete including all accessories as per drawing and Technical Specifications and BS: 5400, section 9.1 & 9.2 (for PTFE) and clause 2004 of MoRTH Specifications. all material, T&P, labour, cartage and all Taxes as applicable complete in all respect as per Drawing and Technical Specifications & as per direction of Engineer-in-charge. MoRTH 13.16 |
| 34 | Super StructureFurnishing and placing reinforced/prestressed cement concrete in super structure all material, T&P, labour, cartage and all Taxes as applicable complete in all respect as per Drawing and Technical Specifications & as per direction of Engineer-in-charge. |
| 35 | PSC Main Beam M45 MoRTH 14.11 |
| 36 | RCC Deck Slab/Solid Slab M40 MoRTH 14.1D |
| 37 | RCC in Cross Beam M45 MoRTH 14.1 |
| 38 | RCC in Crash Barrier M40 MoRTH 8.22 |
| 39 | RCC Foot Path M40 |
| 40 | Supplying, fitting and placing HYSD bar reinforcement in super structure complete ll material, T&P, labour, cartage and all Taxes as applicable complete in all respect as per Drawing and Technical Specifications & as per direction of Engineer-in-charge. MoRTH 14.20 |
| 41 | High tensile steel wires/strands including all accessories for stressing, stressing operations and grouting complete all material, T&P, labour, cartage and all Taxes as applicable complete in all respect as per Drawing and Technical Specifications & as per direction of Engineer-in-charge. MoRTH 14.3 |
| 42 | Providing and Laying cement concrete wearing coat M-30 grade including reinforcement complete as per all material, T&P, labour, cartage and all Taxes as applicable complete in all respect as per Drawing and Technical Specifications & as per direction of Engineer-in-charge. MoRTH 14.4 |
| 43 | Providing and laying of a strip seal expansion joint including anchorage catering to a horizontal movement beyond 70 mm and upto 140mm, complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation. MoRTH 14.21 |
| 44 | Drainage spout complete as per drawing and technical specification. all material, T&P, labour, cartage and all Taxes as applicable complete in all respect as per Drawing and Technical Specifications & as per direction of Engineer-in-charge.MoRTH 14.9 |
| 45 | PCC M-15 grade leveling course below approach slab all material, T&P, labour, cartage and all Taxes as applicable complete in all respect as per Drawing and Technical Specifications & as per direction of Engineer-in-charge.MoRTH 14.10 |
| 46 | Reinfrocement cement concrete approach slab M-30 Grade, all material, T&P, labour, cartage and all Taxes as applicable complete in all respect as per Drawing and Technical Specifications & as per direction of Engineer-in-charge.MoRTH 14.11 |
| 47 | Providing ,fitting and fixing GI pipe 65mm railing all material, T&P, labour, cartage and all Taxes as applicable complete in all respect as per Drawing and Technical Specifications & as per direction of Engineer-in-charge. |
| 48 | Providing and applying 2 coats water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil grease, efforescence and applying paint @ of 1 litre for 2 Sqm. all material, T&P, labour, cartage and all Taxes as applicable complete in all respect as per Drawing and Technical Specifications & as per direction of Engineer-in-charge.MoRTH 14. 16 |
| 49 | Approach Road |
| 50 | Clearing and Grubbing Road Land .(Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.) all material, T&P, labour, cartage and all Taxes as applicable complete in all respect as per Drawing and Technical Specifications & as per direction of Engineer-in-charge. MoRTH 2.3 |
| 51 | Embankment Construction with Material Obtained from Borrow Pits (Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2) all material, T&P, labour, cartage and all Taxes as applicable complete in all respect as per Drawing and Technical Specifications & as per direction of Engineer-in-charge. MoRTH 3.16 |
| 52 | Plant Mix Method (Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 ) all material, T&P, labour, cartage and all Taxes as applicable complete in all respect as per Drawing and Technical Specifications & as per direction of Engineer-in-charge. MoRTH 4.1 |
| 53 | Water Bound Macadam :-Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. grade-II all material, T&P, labour, cartage and all Taxes as applicable complete in all respect as per Drawing and Technical Specifications & as per direction of Engineer-in-charge. MoRTH 4.04 |
| 54 | Water Bound Macadam :-Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. grade-III all material, T&P, labour, cartage and all Taxes as applicable complete in all respect as per Drawing and Technical Specifications & as per direction of Engineer-in-charge. MoRTH 4.11 |
| 55 | Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means all material, T&P, labour, cartage and all Taxes as applicable complete in all respect as per Drawing and Technical Specifications & as per direction of Engineer-in-charge. MoRTH 5.1 |
| 56 | Tack Coat on Bituminous surfaces (Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 to 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.) all material, T&P, labour, cartage and all Taxes as applicable complete in all respect as per Drawing and Technical Specifications & as per direction of Engineer-in-charge.MoRTH 5.2 |
| 57 | Open - Graded Premix Surfacing (Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or cut-back or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant HMP, laying and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades.) MoRTH 5.7 |
| 58 | Seal Coat (Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A and B seal coats) all material, T&P, labour, cartage and all Taxes as applicable complete in all respect as per Drawing and Technical Specifications & as per direction of Engineer-in-charge. MoRTH 5.9 |
| 59 | GSB Below Paver Blocking Soling all material, T&P, labour, cartage and all Taxes as applicable complete in all respect as per Drawing and Technical Specifications & as per direction of Engineer-in-charge.MoRTH 4.1 |
| 60 | Paver Blocking Soling all material, T&P, labour, cartage and all Taxes as applicable complete in all respect as per Drawing and Technical Specifications & as per direction of Engineer-in-charge. |
| 61 | Construction Of K.C. Drain as per drawing and technical Specification all material, T&P, labour, cartage and all Taxes as applicable complete in all respect as per Drawing and Technical Specifications & as per direction of Engineer-in-charge. |
| 62 | Construction Of Chute Drain as per drawing and technical Specification all material, T&P, labour, cartage and all Taxes as applicable complete in all respect as per Drawing and Technical Specifications & as per direction of Engineer-in-charge. |
| 63 | Protection Work |
| 64 | Earth Work excavation of Foundation in structures as per drawing and technical specification,including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved materials all material, T&P, labour, cartage and all Taxes as applicable complete in all respect as per Drawing and Technical Specifications & as per direction of Engineer-in-charge. MoRTH 12.1 |
| 65 | Providing and laying of Filter materials underneath pitching in slopes complete all material, T&P, labour, cartage and all Taxes as applicable complete in all respect as per Drawing and Technical Specifications & as per direction of Engineer-in-charge. MoRTH 15.4 |
| 66 | Providing and laying of Pitching Slopes laid over prepared filler media including boulder apron laid dry in front of toe of embankment complete as per drawing and technical specifications all material, T&P, labour, cartage and all Taxes as applicable complete in all respect as per Drawing and Technical Specifications & as per direction of Engineer-in-charge. MoRTH 15.5 |
| 67 | Providing and Laying of Boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg eack completeas per drawing and technical specification all material, T&P, labour, cartage and all Taxes as applicable complete in all respect as per Drawing and Technical Specifications & as per direction of Engineer-in-charge. MoRTH 15.5 |
| 68 | Toe Wall Please Enable Macros to View BoQ information |
