Name of Work:- Construction of an asphalt road from Waikheda towards Bhaisroli.
Sl. No.
Item Description
1
Construction of embankment with approved materials obtained from borrow pits with a lift up to 1.50m,transporting to site,spreading greading to required slop and compacting to meet requirment of table-300.1 and 300.2 with a lead up to 1000m. As per TSC.301.5
2
L/o granular sub base by providing well greaded materials speading in uniform layers with motor greader / Tractor mounted appropriate equipment complete in all respects.
3
Providing Laying spreading and compecting stone aggregate of specific sizes 45 to 63 mm to WBM specification i/c spreading in uniform thick. Layer use crushable scrining to fill up the interstics of coarse aggregate watering & compacting in stages to get required density by 80-100KN three wheel static rollar as per T.S.C-405
4
Laying brick soling layer on prepared sub-grade with brick on end edging according to lines, graded and cross-section shown on the drawing filling joints with sand and earth, spreading 25 mm thick layer of earth over brick soling, watering and rolliing the same with three wheeled road roller 80-100 kN as per Technical Specification Clause 412
5
Construction of information pillar in B/W with 1:4 cement & C.sand mix mortar 1.20m wide ,1.35 high i/c grenite stone (2*3 ft) size also include printing of latters finished with plaster complete .
6
Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead up to 50 m as per Technical Specification Clause 302.3
7
Concrete with 4 cm gauge brick ballast,fine sand &cement in proportion in 12:6:1 comp as per SI 273
8
R.C.C work with cement app. C.sand and 20mm gauge app. Stone grit mix in 1:2:4 (M-20) excluding supply of reinforcement and its bending but i/c its fixing and binding the same i/c centring and suttring etc as MORD-11.4 / 800 & 1200
9
Mild steel and TMT bar (Fe-500D)or irin work in plai such as reinforce concrete or R.B.workin required shape complete as MORD-12.6 /1000
10
Providing supply & Fixing of 80mm thick ruber moulded vibratory Inter locking Locking tiles (200x160+120).the compressive stregth of paver block is 300mpa and 4.5 kg in weight complete in all as MORD-6.7 / 1500
11
Brick masonary in cement mortar [1:4mix ]in Foundation ;complete excepting pointing and plastring as per drawing and technical specification clauses-600,1202 &1203
12
Plastring with cement mortar 1:4 ,12mm thick on brick work in substructure as per technical specification clauses-613.4 &1204
13
Providing and laying of reinforced cement concrete pipe NP-3 class 600mm dia for culverts on 1st class bedding of granular materials in single row i/c fixing collar with cement mortar 1:2 but excluding excavation ,prtection work ,back filling ,concrete and machinary work in heah wall and parapets clause- 1100 Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
