Name of Work:- iapk;r kkgtgkiqj easa fko efUnj ls esu jksM rd b0 yksfdxa VkbZYl fuekZ.k dk;Z
Sl. No.
Item Description
1
Construction of embankment with approved materials obtained from borrow pits with a lift up to 1.50m,transporting to site,spreading greading to required slop and compacting to meet requirment of table-300.1 and 300.2 with a lead up to 1.0 km. As per TSC.301.5
2
L/o granular sub base by providing well greaded materials speading in uniform layers with motor greader / Tractor mounted appropriate equipment complete in all respects.
3
Providing Laying spreading and compecting stone aggregate of specific sizes 22.4 to 53 mm to WBM specification i/c spreading in uniform thick. Layer use crushable scrining to fill up the interstics of coarse aggregate watering & compacting in stages to get required density by 80-100KN three wheel static rollar as per T.S.C-405
4
Construction of information pillar in B/W with 1:4 cement & C.sand mix mortar 1.20m wide ,1.35 high i/c grenite stone (2*3 ft) size also include printing of latters finished with plaster complete .
5
Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead up to 50 m as per Technical Specification Clause 302.3
6
Concrete with 4cm Guage brick ballast fine sand of 1.25F:M and cement in proportion of 1:6:12 in foundation and under floors including supply of all meterials labour and T&P etc requied for proper completion of work S.I NO 273
7
Providing supply and fixing of 80mm thick ruber moulded vibratory Interlocking tiles by high pressure and controlled vibration machine having plain dimension 200 X (160+120mm)with minimum 5mm thick topping of O.P cement mixed with 25% marble powder the compressive strength of concrete paver blocks shall not be less than 300 mpa and 4.5 kg/ton including levelling and dressing filling joints with local sand over G.S.B and also including cost of all materials. Labour excluding cost of G.S.B and T&P etc requred for proper completion of work as per direction of engineer-in charge, and T& P ete. [as per MORD 1500]
8
R,C.C work in 1:2:4 (M-20) in cement coarse sand, and 20mm guage stone grit In lintels of door,window and sunshed excluding rienforcement and bending including all material, labour and T&P etc all completion of the work . [ 11.40 /Mord 800 & 1200]
9
Mild steel or iron work in plain work such as reinforced concrete or reinforced brick work including bending for proper completion of work including all material, labour and T&P etc all completion of the work . [ Mord 1000] Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
