|
| 1 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 2 | Dismantling timber scantlings 40 Sqcm and over in section, in any position (Unframed work) complete all as specified and directed. |
| 3 | Dismantling Wall and ceiling boards (fiber, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 4 | Demolition of brick masonry /stone masonry built in cement mortar including all quoins, pillars arches etc complete all as specified and directed. |
| 5 | S&F in repair second class hard-wood, timber fixed and clean sawn, in scantlings complete all as specified and directed. |
| 6 | M&L for preparing surfaces of wood and wood based materials, new or old of any description and girth, not otherwise described and treated with creosote complete all as specified and directed. |
| 7 | S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 8 | S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified plain, galvanized, complete all as specified and directed |
| 9 | M&L for 4mm thick non asbestos fiber cement building boards (PVC coating E board designer) fixed or laid /inserted to timber/ GI/ Aluminium frame work with screws in ceiling flat or sloping complete all as specified and directed. |
| 10 | M&L for GI frame work of size 605x605mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre, complete all as specified and directed. |
| 11 | S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and directed. |
| 12 | M&L for exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fiber 8mm suitably placed in false ceiling grid made of anodised aluminium snap grid frame work for false ceiling, size of grid 605x605 mm & hangers 6mm dia. GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including dismantling old ceiling complete all as specified and directed. |
| 13 | Supply only liquid water proofing compound, complete all as specified and directed. |
| 14 | M&L for brick work with sub class 'B' brick in cement mortar 1:6, straight or curved on plan to any radius in half brick thick wall built complete all as specified and directed. |
| 15 | M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed. |
| 16 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed. |
| 17 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n.exc.4 sqm each complete all as specified and directed. |
| 18 | Dismantling boarding, any thickness, any description fixed in any position with nails complete all as specified and directed. |
| 19 | S&F anodized aluminum frame for doors, windows, Ventilator, Portion, powder coated (minimum thickness of powder coating 50 micron) with one or more rebates including PVC protector sheeting and jointing cleat for fixing etc., complete all as specified and directed.Note: Glass and particle board shall be measured and paid separately. |
| 20 | S&F aluminum anodized door shutters, powder coated of any colour (thickness of powder coating not less than 50 Micron) side hung type, without sash bars, aluminum section weighing 1.20 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodised aluminium fittings such as hinges type B-21, 100 mm long (03 Nos) 100 mm aluminium handle (02 Nos) and 100 mm aluminium tower bolt (02 Nos) lock, in one shutter complete all as specified and directed.Note: Glass and board shall be measured and paid separately. |
| 21 | S&F 4-5 mm thick Aluminium partition sheet fixed to aluminium frame work using anodized aluminium bead, rubber beading and packing, in panels exc .5 sqm in each pane complete all as specified and directed. |
| 22 | S&F in repair IInd class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 23 | S&F Flush shutters, solid core construction, with particle board core and plywood face panels, 30 mm thick commercial type on both side with one face is covered with decorative face veneer with lipping/ frame to match complete all as specified and directed. |
| 24 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified and directed. |
| 25 | S&F 35mm thick IInd class hard wood plain framed, paneled shutters (any numbers of panels), with panels of timbers flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed. |
| 26 | S&F glazed and skeleton shutters 35mm thick 2nd class Hard wood open rebated and prepared to receive glass, gauge etc. edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc (without sash bars), sizes of members of shutter with three number of panels complete all as specified and directed. |
| 27 | S&F galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed. |
| 28 | S&F in repair galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed. |
| 29 | S&F butt hinges 100mm long, extruded aluminium alloy with galvanized mild steel hinge pin, anodisedand fixed, type C-21 complete all as specified and directed. |
| 30 | S&F for butt hinge ISI Marked 100mm size, medium weight, cold rolled mild steel complete all as specified and directed. |
| 31 | S&F 150mm long Aluminium anodised, barrel tower bolts of ex- traded section and fixed complete all as specified and directed. |
| 32 | S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 250 mm and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and refixed complete all as specified and directed. |
| 33 | S&F 125mm Aluminium handles, cast type, anodise complete all as specified and directed. |
| 34 | S&F in repair 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 35 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 36 | S&F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, fixed to wall, complete all as specified and directed. |
| 37 | S&F for PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches, complete all as specified and directed. |
| 38 | S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 39 | S&F PVC (SWR) bends any radius 75 mm dia provided with access door complete all as specified and directed. |
| 40 | S&F PVC (SWR) junction single, (Single T) equal or unequal 75 mm dia complete all as specified and directed. |
| 41 | S&F for PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches complete all as specified and directed. |
| 42 | S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 43 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads, of any height including necessary scaffolding and T&P required to complete the work complete all as specified and directed. |
| 44 | S&F 4mm thick figured glass, pin head type and glazing with oil putty/wooden beading in squares n exc 0.5 sqm in each pane complete all as specified and directed. |
| 45 | S&F sheet glass ordinary quality 4 mm thick glazing in square/ rectangle n.exc 0.5 sqm each pan with oil putty or aluminium beads fixed to steel and wooden of any height including necessary scaffolding and T&P required to complete the work complete all as specified and directed. |
| 46 | M&L for taking down cement or cement lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 47 | M&L for rendering 15mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces incl finished even and smooth without using extra cement complete all as specified and directed. |
| 48 | M&L for rendering 10mm thick in cement plaster 1:6 on rough faces of brick work or concrete surfaces/stone work incl finishing surface w/o using extra cement complete all as specified and directed |
| 49 | M&L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 50 | S&F glazed ceramic coloured tiles of size 300x450x7mm/ 250x350x7mm thick as in dados, skirting, wall etc set jointed and pointed in coloured cement to match the tiles over 10 mm thick rendering in CM 1:4, complete all as specified and directed. |
| 51 | M&L for Non-Skid coloured ceramic tiles/ Matt finish 7 to 8mm thick (square/rectangular) area of each tiles exc 0.18 Sqm but n.exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in CM 1:6 for laying glazed tiles in floors etc. , complete all as specified complete all as specified and directed. |
| 52 | M&L for vitrified ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick rendering in CM 1:4 complete all as specified and directed. |
| 53 | M&L for Non-Skid coloured ceramic tiles/ Matt finish 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.06 Sqm but n. exc. 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in CM 1:6 for laying glazed tiles in floors etc, complete all as specified and directed. |
| 54 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded & pointed in any mortar complete all as specified and directed. |
| 55 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining ( veneering to wall ) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 56 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 57 | M&L for preparation of new or previous surface and applying two coats of synthetic enamel paint over coat of pink primer on newly wooden surfaces of any description not otherwise described over 10 Cm width or girth including preparation of surfaces complete all as specified and directed. |
| 58 | M&L for preparing new plastered or unplastered surface of walls and applying 2 coats of OBD over a coat of 3 mm thick wall care putty as on walls complete all as specified and directed. |
| 59 | M&L for preparing new plastered or unplastered surface of walls and applying 2 coats of cement base paint complete all as specified and directed. |
| 60 | S&F in repair Bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed chromium plated 15 mm bore complete all as specified and directed. |
| 61 | S&F in repair 15 mm dia Angle/ stop cock cast copper alloy, fancy type chromium plated screwed down high pressure, complete all as specified and directed. |
| 62 | S&F in repair 15mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type, chromium plated, complete all as specified and directed. |
| 63 | Taking up or down 15mm bore, steel water tubing & connections complete all as specified and directed. |
| 64 | Taking up or down 20 bore, steel water tubing & connections complete all as specified and directed. |
| 65 | M&L for 15mm bore tubes, 'medium grade' galvanized, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 66 | S&F 20mm outer dia of 3-layer PP-R polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc with necessary clamp/ fitting complete all as specified and directed. |
| 67 | M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girt complete all as specified and directed. |
| 68 | S&F in repair 15mm fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 69 | S&F in repair 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 70 | Dismantling water tanks and removing to store exc 500 ltrs but n exc 1000 ltrs complete all as specified and directed. |
| 71 | S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 ltr capacity hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed. |
| 72 | S&F in repair ball brass valves, high pressure, with polythene float and fly nut complete, screwed for 20mm iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 73 | S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts flushing cistern and flush pipe) etc., complete all as specified and directed. |
| 74 | S&F in repair vitreous china wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand incl pillar tap CP 15 mm bore complete all as specified and directed. |
| 75 | S&F in repair 10 liters capacity PVC low level valve less symphonic action type flushing cistern low level white with inlet, ball valve, float and handle including brackets and flushing pipe etc complete all as specified and directed. |
| 76 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed. |
| 77 | S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, roof, framed balusters, walkways, railings, framework of water tanks and similar work conforming to Fe290, Gde-E-165, complete all as specified and directed |
| 78 | S&F 5mm thick clear solid polycarbonate sheet on roofs as in plain/ circular type Shape including necessary fixing arrangements with screws, nut bolts, washer, nuts, rubber strips/ rubber beading, silicone etc up to 16m height to complete the work with & including necessary scaffoldings, complete all as specified and directed. Please Enable Macros to View BoQ information |
