|
| 1 | M&L for PCC 1:3:6, type C2 (40mm graded stone aggregate) as foundation, filling and mass concrete incl demolition of concrete complete all as specified and directed. |
| 2 | M&L for providing reinforced cement concrete type B-I, 1:2:4 (20mm graded stone aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average, sectional area exc 100 and n exc 250 sq.cm, with or without chamfered angles and flat, splayed, rounded or mitred tops including dismantling of RCC post etc complete all as specified and directed. |
| 3 | S&F for Galvanised 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barb at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins, etc incl dismantling/ Taking out barbed wire in fencing complete all as specified and directed. (Note : Each line of wire to be measured). |
| 4 | Restraining/resecuring including making good staples, Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins, etc complete all as specified and directed. (Note : Each line of wire to be measured). |
| 5 | S&F for Angle iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets including all necessary drilling, bolting or rivetting etc and similar work confirming to Fe 290 Gd E-165 incl dismantling of posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground etc complete all as specified and directed. |
| 6 | S&F for mild steel screw bolts (machine made ) with hexagonal or square heads at one end, 10mm dia, not exc 10 cm long, bolt with washer and nuts complete all as specified and directed. |
| 7 | S&F in repairs concertina coil fencing with punched tape coil 600mm dia 10 mtr openable length (Total length 90 mtr) having 50 nos round per 6 meter with tape (0.52mm thick) and weight 43.478 gm/mtr and fixing the same on Y shaped angle iron placed 2 mtr apart and with 6 horizontal RBT (reinforced barbed tape) wire, stud tied with GI stapes sand GI clips to retain horizontal, including necessary bolts complete all as specified and directed. |
| 8 | M&L for brick work with sub class \\"B\\" brick (old size) straight or curved on plan exc 6m mean radius built in CM 1:6 incl demolition off brickwork built in cement mortar or cement lime mortar complete all as specified and directed. |
| 9 | All as per item No 8 abobe but except bricks complete all as specified and directed. (Note : Old bricks obtained from demolition shall be reused.) |
| 10 | M&L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 11 | M&L for rendering 15mm thick in CM (1:)4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement incl taking down old cement plaster complete all as specified and directed. |
| 12 | M&L for plain Cement concrete in type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in surface channels and drains incl demolition of existing PCC complete all as specified and directed. |
| 13 | M&L for plain cement concrete in type B0, 1:2:4 (using 12.5mm graded stone aggregate) as in benching ,hunching for drains etc incl demolition of existing PCC complete all as specified and directed. |
| 14 | Extra for forming fair finished drain or channel, 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred, stopped ends, complete all as specified and directed. |
| 15 | M&L for plain cement concrete (1:2:4), type B1 (using 20mm graded stone aggregate) as in coping including necessary form work complete all as specified and directed. |
| 16 | Cutting hole in brick walls built in cement mortar or cement lime mortar for inserting hold fasts and making good dismantled portion in CM (1:3) or cement concrete 1:2:4, type B-1 as required depth of embedded portion of hold fasts or lugs measured from the face of the jamb in the wall exc. half brick but not exc. one brick complete all as specified and direced. |
| 17 | S&F for framed work as in doors or gates of angle or other section with plates, rails, braces, hold fast etc, complete drilled for fixing of steel sheeting or other covering etc incl dismantling wrought iron or mild steel work of any description not otherwise complete all as specified and directed. |
| 18 | Taking down Iron/steel door shutters, side hung exc 1.5 sqm and n. exc 5 sqm and refixing in same opening after repairing including welding and necessary jointing cleats screws etc fittings such as hinges complete all as specified and directed. |
| 19 | S&F for 1.0mm thick PVC plain sheet including taking down old one in hearth covering to framed steel/iron doors/gates and in partition walls, etc cut to size edges beaded if directed holes punched including round headed screws nails or rivets and fixed to seel members complete all as specified and directed. |
| 20 | Supply and fixing in repairs 1.0mm thick mild steel plain black sheet in hearth covering to door shutters covering to door chawkhats (frames) chullahoods, watertanks, water troughs, ducts, urinal troughs and funnel etc cut to size edges beaded if directed holes punched including round headed screws clout nails or rivets and fixed to wood or steel members etc with plain 40mm lap joints or welded / riveted seams including bending , turning up, mitread angles stooped ends outlets etcas required complete all as specified and directed. |
| 21 | M&L for preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 22 | M&L for precast RCC 1: 2:4, type B1 (nominal mix ) (using 20mm graded stone aggregates) as in cover slab etc ste in CM (1:4) incl demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) complete all as specifide and directed. |
| 23 | M&L for Mild steel TMT bars 10mm dia and over as in reinforcement,cut to length bent to shape required including hooking ends and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 24 | M&L for Mild steel TMT bars 6 to 8mm dia cut to length bent to shape required including cranking bending hooking ends and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 25 | M&L for 40mm thick cement concrete 1:2:4, Type B-0 (using 12.5 mm graded stone aggregate) as in floors, finished even and smooth using extra cement incl Demolition of PCC in ground floor and paving n exc 15cm thick below or above ground level complete all as specified and directed. |
| 26 | M&L for 38mm wide of glass dividing strips, 3mm thick and inserted in position to confirm design of flooring complete all as specified and directed. |
| 27 | M&L for 75 mm thick cement concrete type C1, 1:3:6 (using 20mm graded stone aggrtegate) as in plinth protection including finsihing even & fair incl demolition of PCC complete all as specified directed. |
| 28 | M&L for Providing 35 mm thick precast RCC Louvres and Jallies type B0, 1:2:4 (using 12.5mm graded stone aggregate) incl dismantling of old reinforced cement concrete precast louvres and Jallies any type complete all as specified and directed. |
| 29 | M&L for 75 mm thick Cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base incl demolition of existing PCC etc complete all as specified and directed. |
| 30 | M&L for 60mm thick rubber moulded glossy finish coloured interlocking precast PCC pavers any colour of M-35 grade laid over 25mm thick sand cushioning and joint filled with fine sand incl levelling, tamping and sweeping etc incl dismantling of old stone slab and tiles of any description or and thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 31 | M&L for 400x400x20mm thick Exterior grade Heavy duty tiles as in floor/pavings set and jointed in neat grey cement slurry and pointed with mixture of white cement and pigment over and including 15 mm thick screed bed in CM (1:4) incl dismantling of old stone slab and tiles of any description or and thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 32 | M&L for chequered cement concrete tiles coloured glossy finish rubber moulding with mixture of white cement and pigments of size 30cmx30cmx25mm thick set, jointed and pointed in neat cement slurry in fooors incl 15 mm thick screed bed in CM (1:6) incl dismantling of old stone slab and tiles of any description or and thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 33 | M&L for replacement of Glass coping with broken glass @ 14 Kg/Square meter fixed in and including 20 mm thick cement mortar (1:3) complete all as specified and directed. |
| 34 | M&L for Cleaning/desludging of existing septic tank, of any capacity and depth with inlet/outlet chambers including taking out sludge (both organic and inorganic matter) in any form and other foreign matter etc viz sediment, sand, ash, grease, fibre, silt, roots or vegetation etc by means of sewage sucking machine and after plugging the incoming sewer line through combined high pressure water jetting/ suction (Vacuum) type machine mounted on LCV/HCV facility of high pressure vacuum and removing the sludge outside MD land by any means and at a place meant for the purpose by local municipality complete all as specified and directed.Note: For measurement purpose Liquid depth of septic tank shall be measured before removal of sludge. |
| 35 | M&L for Cleaning/desludging of existing soakage well of any capacity and depth with inlet/outlet chambers including taking out sludge (both organic and inorganic matter) in any form and other foreign matter etc viz sediment, sand, ash, grease, fibre, silt, roots or vegetation etc by means of sewage sucking machine and after plugging the incoming sewer line through combined high pressure water jetting/ suction (Vacuum) type machine mounted on LCV/HCV facility of high pressure vacuum and removing the sludge outside MD land by any means at a place meant for the purpose by local munucipality complete all as specified and directed at site. |
| 36 | M&L for Cleaning/desludging of existing sewar line from nahani trap to 1st manhole manually or by way of any other suitable means of any capacity and depth including taking out sludge in any form and other foreign matter etc viz. sediment, sand, ash, grease, night soil, fibre, silt, roots or vegetation etc and keeping the sewar line functional duly removing the sludge outside MD land by any means and at a place meant for the purpose by local municipality complete all as specified and directed. |
| 37 | M&L for cleaning/clearing of sewer line (including in between manholes) up to 200 mm bore sewer line of any type and at any location, depth of manhole n.exc. 3 meter in depth, section, line between the sewer lines to septic tank/soak well/sump well and cleaning any type of blockage including desilting, descaling and dechocking of drain and manhole manually or by any other way and keeping the sewer line functional and removing the sludge outside MD land and at a place meant for the purpose by local municipality complete all as specified and directed. |
| 38 | M&L for cleaning/clearing of sewer line (including in between manholes) up to 200 mm bore sewer line of any type and at any location, depth of manhole n.exc. 3 meter in depth, section, line between the sewer lines to septic tank/soak well/sump well and cleaning any type of blockage including desilting, descaling and dechocking of drain and manhole with combined high pressure water jetting cum suction vacuum type machine mounted on LCV/HCV and having facility of high pressure vacuum and provn of hydraulic application through high pressure thermo plastic fibre based water jetting hose and conical round shape nozzle pipe and flushing after cleaning and removing the sludge outside MD land by any means at a place meant for the purpose by local municipality complete all as specified and directed. |
| 39 | Excavating in trenches in soft/loose soil, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out complete all as specified and directed. |
| 40 | M&L for plain cement concrete 1:5:10, type E-2 (using 40mm graded stone aggregate) as in foundation, filling & mass concrete including demolition of existing cement concrete complete all as specified and directed. |
| 41 | M&L for PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in benching, copings and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work and including demolition of existing cement concrete complete all as specified and directed. |
| 42 | Returning filling in including spreading watering and well ramming in layer exceding 25 cm each in soil complete all as specified and directed. |
| 43 | Removing excavated soil to a distance exceding 250 m but not exceeding 500 m and deposited where directed at a level not excedding 1.5m above the starting point complete all as specified and directed. |
| 44 | Taking up broken sewer line n. exc 1.5 m depth and replacing sewer pipe with PVC pipe 160 mm bore including jointing of pipe in CM (1:1), haunching against the sides of pipe in PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) including necessary excavation and earth work, disposal of material up to a distance not exc 50mtr and making necessary connection after cutting into existing sewer line/manhole to make it functional complete all as specified and directed. Note:- Cutting existing manhole and making good shall be measured and paid seperately. |
| 45 | Taking up broken sewer line exc 1.5 m but n.exc 3.0 m depth and replacing sewer pipe with PVC pipe 200mm bore including jointing of pipe in CM (1:1), haunching against the sides of pipe in PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) including necessary excavation and earth work, disposal of material up to a distance not exc 50mtr and making necessary connection after cutting into existing sewer line/manhole to make it functional complete all as specified and directed.. Note:- Cutting existing manhole and making good shall be measured and paid seperately |
| 46 | S&F in repair PVC (SWR) soil waste pipe of pressure rating 6kgf/Sqm single socketed in any length of 160mm bore with rubber ring joints laid in trenches for sewage disposal complete all as specified and directed. |
| 47 | M&L for cutting into existing man holes for connection new drains of dia of pipe 160mm dia pipe making good to pipe and rendering cutting out existing benching for and forming branch channels (1/2 round or 3/4 section) in cement concrete 1:2:4 ,type B1 (using 20 mm graded stone aggregate) finished smooth and reforming benching complete all as specified and directed. |
| 48 | M&Lfor cutting into existing man holes for connection new drains of dia of pipe 200mm internal dia making good to pipe and rendering cutting out existing benching for and forming branch channels (1/2 round or 3/4 section) in cement concrete 1:2:4,type B1 (using 20 mm graded stone aggregate) finished smooth and reforming benching complete all as specified and directed. |
| 49 | M&L for cutting into existing man holes for connection new drains of dia of pipe 110mm internal dia making good to pipe and rendering cutting out existing benching for and forming branch channels (1/2 round or 3/4 section) in cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) finished smooth and reforming benching complete all as specified and directed. |
| 50 | S&F in repair PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and laid in trenches or in floors complete all as specified and directed. |
| 51 | S&F in repair PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and laid in trenches or in floors complete all as specified and directed. |
| 52 | S&F in repair PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and fixed to walls complete all as specified and directed. |
| 53 | S&F in repair PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints and fixed to walls complete all as specified and directed. |
| 54 | S&F PVC(SWR) bends 110mm dia complete all as specified and directed. |
| 55 | S&F PVC(SWR) bends 75 mm dia complete all as specified and directed. |
| 56 | S&F in repair 75 mm diameter of outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 57 | S&F in repair 100 mm diameter of outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 58 | S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest with CI 'P' or 'S' trap and providing lime concrete bedding and connecting to flusing cistern complete all as specified and directed. |
| 59 | S&F in repair Viterous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) and including Plastic water closet seat cover white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 60 | S&F in repair vitreous china bowl urinal flat back of size 465 x 355x 265 mm, white excluding flushing cistern, flush pipe and waste pipe but including grating and union for discharge pipe complete all as specified and directed. |
| 61 | S&F in repair stainless steel grating doom without hole 125 mm dia complete all as specified and as directed. |
| 62 | S&F in repair stainless steel grating doom with hole 125 mm dia complete all as specified and as directed. |
| 63 | S&F in repair PVC connection 450 mm long suitable for 15 mm GI pipe with two PTMT nuts & rubber washers complete all as specified and directed. |
| 64 | S&F in repair PVC low level white flushing cistern valveless syphonic action type 10 lts capacity with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend complete all as specified and directed. |
| 65 | S & F in repair plastic water closet seat cover, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed. |
| 66 | S&F in repair waste pipe 32mm dia for WHB/ sink/ urinal complete all as specified and directed. |
| 67 | S & F in repair hand shower (Health faucet) mitd steel CP with 1.00 M flexible tube with wall hook bracket etc, complete set of superior quality complete all as specified and directed. |
| 68 | S & F in repair angle valve cast copper alloy with capstan head chromium plated screwed down, high pressure with long shanks and fly nuts screwed for 15mm bore pipe complete all as specified and directed. |
| 69 | S & F in repair two way angle valve cast copper alloy with capstain head chromium plated screwed down, high pressure with long shanks and fly nuts screwed for 15mm bore pipe complete all as specified and directed. |
| 70 | M&L for construction of soakage well of size 3.0M dia x 4.50M effective depth with fly ash bircks and RCC M-25 design Mix using 20mm graded stone aggregate as in cover slab etc. including all required earthwork in soft/loose soil, returning filing and removal etc and filling of brick bats and cement concrete etc complete all as shown on CELZ drawing No TD/576 sheet 1/2 & 2/2 complete all as specified and directed. Note- filling of earth/rubble as ramming in old broken soakage pit and disconnection of inlet sewage line inclusive of this items. |
| 71 | M&L construction of soakage well of size 2.4M dia x 4.50M effective depth with fly ash bircks and RCC M-25 design Mix using 20mm graded stone aggregate as in cover slab etc. including all required earthwork in soft/loose soil, returning filing and removal etc and filling of brick bats and cement concrete etc complete all as shown on CELZ drawing No TD/576 sheet 1/2 & 2/2 complete all as specified and directed. Note- filling of earth/rubble as ramming in old broken soakage pit and disconnection of inlet sewage line inclusive of this items. |
| 72 | Supply only 3mm dia GI wire chain link fencing with 75x75mm mesh size and fixed to any type of strandard rails straining bolts etc including provision of binding wire complete all as specified and directed.Note: Weight constantant shall be determined by BOO of chain link fencing. |
| 73 | Fixing only chain link fencing including line wires, any mesh, size and type fixed to any type of standards rails, straining bolts, etc.including dismantling of existing fencing and provission of binding wire complete all as specified and directed. |
| 74 | S&F for rolled sections as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates Fe 410-W (Gde- E- 250) quality-A incl dismantling of existing wrought iron and mild steel work of any description complete all as specified and directed. |
| 75 | S & F for 0.50 mm thick pre-painted galvalume aluminium zinc alloy coated steel (550 Mpa) corrugated sheet of any colour, double ribbed trapezoidal profile in desired length etc, as in roof covering/cladding to wall, with joints overlapped and fastened with fasteners using hot dipped zinc coated self drilling hexagonal washer head fasteners incl dismantlinf of old existing sheets, with fittings complete all as specified and directed. |
| 76 | S&F for 500 litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including dismantling PVC water tanks and removing for capacity exceeding 250 litres & not exceeding 500 litres etc complete all as specified and directed. |
| 77 | S&F for 1000 litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc including dismantling PVC water tanks and removing for capacity exceeding 500 litres & not exceeding 1000 litres etc complete all as specified and directed. |
| 78 | Cleaning and removing all scale and dirt, etc, from tanks & from mouths of circulating pipes, etc exc 250 and n exc 500 capacity in litres and write date of cleaning and due date of cleaning on OHT complete all as specified and directed. |
| 79 | Cleaning and removing all scale and dirt, etc, from tanks & from mouths of circulating pipes, etc exc 500 and n exc 1000 capacity in litres and write date of cleaning and due date of cleaning on OHT complete all as specified and directed. Please Enable Macros to View BoQ information |
