|
| 1 | M&L in Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed |
| 2 | M&L for Preparing existing blacktop surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags or by hand compressor to remove all loose dirt etc.complete all as specified and directed. |
| 3 | M&L for applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 sq metre of paving bitumen complete all as specified and directed. |
| 4 | M&L for laying bituminous premix semi dense asphaltic concrete with 5.5% binder content 40mm consolidated thickness by weight of total mix, rolled and compacted to required camber and gradient complete using paving bitumen (VG-30) any penetration (SDAC shall be laid with mechanical paver and rolled with 8-10 Ton tandom power roller) complete all as specified and directed. Note :- Job Mix formula as per MORTH Specification shall be got done from the accredited Govt's approved lab and cost there on shall be born by the contractor. Bitumen content indicated in description shall be minimum however actual requirement of bitumen binder in plus side shall be as per Job Mix formula. Work shall be executed after approval of Job Mix formula by GE. |
| 5 | M&L for premixed bituminous macadam with 4% binder paving bitumen (VG-30) content by wt. of total mix laid/ rolled and compacted to required gradient and camber consolidated thickness 75 mm thickness or less, and rolled with power roller 8 to 10 Ton complete all as specified and directed. Note :- Job Mix formula as per MORTH Specification shall be got done from the accredited Govt's approved lab and cost there on shall be born by the contractor. Bitumen content indicated in description shall be minimum however actual requirement of bitumen binder in plus side shall be as per Job Mix formula. Work shall be executed after approval of Job Mix formula by GE. |
| 6 | Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. |
| 7 | M & L for preparing bituminous surfaces of road and marking 2 mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. |
| 8 | S&F in repair Road safety poly carbonate convex mirror 100cm dia encased in ABS materials, orange colour for outdoor installation including 3.0m long and 75mm dia MS pipe as stand, fixed to ABS frame with proper fixing arrangement (Stand painting with two coats of synthetic enamel paint over one coat of red oxide primer fixed on ground in PCC block of size 45x45x50cm of PCC 1:2:4 type B-1 (Using 20mm graded crushed stone aggregate) and including necessary excavation earth work and removal of soil to a distance n. exc. 50m complete all as specified and as directed. |
| 9 | S&F in repair Sparkle road side delinators with tri color reflector and 150mm wide reflecto radium sticker pasted over painted MS pipes approx 100mm dia and 100 cm long fixed in cement concrete bedding 150mm x 150mm x 300 mm , 1:3:6 type C-1 (using 20 mm graded aggregate incl necessary earth work complete all as specified. |
| 10 | Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed |
| 11 | M&L Providing and laying at or near ground level factory made kerb stone of nominal mix (1:1.5:3) grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. |
| 12 | M&L preparation of new surface of kerbs stone and applying two coats of synthetic enemal paints to cement concrete surface over 10 cm width or girth on kerbs all as specified and directed. Please Enable Macros to View BoQ information |
