|
| 1 | Replacement of floor tiles |
| 2 | Dismantling tile work in floors, dado, walls, kitchen counter and roofs including base cement mortar and PCC up to 100 mm thick including stacking and disposal of rubbish to the dump areas within the township premises at designated place and as directed by EIC all complete. In case of sunken portion dismantling to be done till mother slab. |
| 3 | Consolidation and compaction of dismantled base with compactor after dismentling of old tile and PCC including making good the undulations etc. and re-compacting, tamping, watering etc complete to make it good for PCC and flooring. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 5 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 6 | Providing and laying polished double charged vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, |
| 7 | Laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. (Size of tiles 600mmx600mm. or as directed by EIC) |
| 8 | Laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Size of tiles 600mmx600mm. or as directed by EIC) |
| 9 | Providing and laying polished double charged Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, |
| 10 | Laid over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. (Size of tiles 600mmx600mm. or as directed by EIC) |
| 11 | Laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints. (Size of tiles 600mmx600mm. or as directed by EIC) |
| 12 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 thickness to be specified by the manufacture) of approved make in all colours, shades including burgundy, bottle green, black etc. as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3Kg per sqm including pointing in white cement mixed with pigment of matching shade complete- size 450mmx300mm |
| 13 | Providing and laying ceramic anti-skid floor tiles 300x300mm as directed by EIC (thickness to be specified by the manufacturer) of Ist quality conforming to Is: 15622 of approved make in all colours , shades including White. Ivory, Grey, Fume Red Brown, etc. laid on 20mm thick cement mortar 1:4 (1 cement: 4 Coarse sand) , jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. |
| 14 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing,moulding and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick |
| 15 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, moulding and polishing complete. |
| 16 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, door/window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour, size and shade |
| 17 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dump areas within the township premises at designated place and as directed by EIC all complete |
| 18 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within township premises, all complete as per direction of Engineer-in-Charge: With cement mortar 1:4 (1cement: 4 coarse sand) |
| 19 | Supply of Double Charged Vitrified tile of size 600mm x 600mm |
| 20 | Supply of cermaic wall tile as per above item |
| 21 | Supply of cermaic floor tile as per above item |
| 22 | Removing of existing Doors and refixing using existing hinges after cutting from bottom including fixing of lipping wherever required as per direction of EIC |
| 23 | Replacement of doors and windows |
| 24 | Dismantling doors, windows, cupboard, cabinet and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within township including disposal of rubbish to the dump areas within the township premises at designated place and as directed by EIC all complete (payment will be made based on number of opening) |
| 25 | Providing & fixing Windows/ ventilators fabricated from roll framed sections made of Galvanized steel Colour coated/ powder coated (base steel as per IS 513 \\"D\\" quality Galvanized as per IS 277 with zinc of 120 gms/sqm). Coated sections should be with Primer coat of Epoxy Primer of 5-7 microns thick, finish painted with Polyester paint of 12-16 microns thick or Powder Coated with pure Polyester up to 50-60 microns thick. Window Frame should be fixed to brick/ concrete masonry by using Nylon self expanding caps and driving MS electroplated 80mm long screws into the caps through frame. Each Glazed Shutter and Mesh shutter should be provided with SS Pivot Hinges, Handle , Stay, tower bolts etc. but excluding the cost of infills like Glass panes, wire mesh. Sections for Frame should be of 72mm x 55mm, Section for Mullion should be of 72mm x 50mm, Section for Shutter Frame should be of 47mm x 20mm, Section for Fixed Glass Bead should be of 12mm x 12mm, and Section for Fly Mesh should be of 40mm x 20mm. Overall window area shall be measured for this item for payment which will include any fixed portion, glazed shutter, fly mesh shutter, etc. |
| 26 | Providing & fixing glass panes with EPDM and glazing clips in steel doors, windows, clerestory windows, all complete with :5 mm thick plain glass panes |
| 27 | Providing & fixing Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture to windows, clerestory windows & doors, complete. |
| 28 | Providing and fixing 10 mm MS square guard bar grill at a maximum gap of 100 mm or less with 12mm outer flat including painting/powder coating as per direction of EIC |
| 29 | Providing and fixing door frame fabricated from sections roll formed out of 1.2mm thick galvanized steel (Base steel as per IS 513) with zinc of 120 gms/sq.mtr, Powder Coated with pure polyester powder paint up to 50-60 microns thick. The overall size of the section should be 105x60mm with rebate of 37mm for shutter for single rebate door frame. The frame section should be cut to length and metre joined with corner brackets made of CRCA electroplated. The frame should be provided with (a) 3 Nos. of M.S. powder coated 4” Butt hinges of 2mm thickness welded to the frame. (b) 6 Nos. of 1.2mm thick CRCA electroplated stiffeners should be welded to frame. (c) 6 Nos. of 8” M.S. hold fasts with split end tail welded to stiffener plates. (d) One no. aldrop receiver. (e) Each frame should be provided with 25x50mm tie rod at bottom. All welded places should be treated with protective coat of zinc rich primer. The entire frame should be provided with a coat of etched primer and powder coated with pure polyester powder up to 50-60 microns and as per direction of EIC |
| 30 | Door Frames Single Rebate 105mm x 60 mm |
| 31 | Door Frames Double Rebate 125mm x 60 mm |
| 32 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters with ISI marked M.S. pressed butt hinges bright finished of required size and finishing with putty, primer and Synthetic enamel paint of reuqired shade in two or more coats. |
| 33 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on edges of flush door shutters (over all area of door shutter to be measured and cofficient for lipping fixed on number of edges of door to be multiplied for payment). |
| 34 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Kiln seasoned and chemically treated hollock wood and finishing with putty, primer and Synthetic enamel paint of reuqired shade in two or more coats. |
| 35 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm |
| 36 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm |
| 37 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm |
| 38 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100 mm |
| 39 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper |
| 40 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 41 | Providing and fixing SS-304 grade curtain rods of wall thickness 1.20 mm with two SS brackets fixed with brass screws and wooden plugs etc. wherever necessary complete.- 20 mm dia |
| 42 | Toilet & Kitchen Plumbing, Sanitary Work |
| 43 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 44 | Supplying and filling in sunken portion with Cinder/ravish under floors, including watering, ramming, consolidating and dressing complete and preparing it for laying of PCC. |
| 45 | Demolishing & removing of old internal all concealed/exposed surface GI pipes & all CP fittings including stacking of serviceable material and disposal of rubbish to the dump areas within the township premises at designated place and as directed by EIC all complete for one (toilet + bathroom) in house. |
| 46 | Demolishing & removing of old internal all concealed/exposed surface GI pipes & all CP fittings including stacking of serviceable material and disposal of rubbish to the dump areas within the township premises at designated place and as directed by EIC all complete in kitchen upto shaft of the house as per direction of EIC. |
| 47 | Dismantling/ removal of G.I. pipes (external work/ internal work exposed on wall) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes at designated place as per direction of Engineer-in-charge : of any dia |
| 48 | Demolishing & removing of old existing sanitary fittings like wash basin, WC, cistern, mirror, including removal of all sanitary related concealed fittings like trap, bend, pipe including stacking of serviceable material and disposal of rubbish to the dump areas within the township premises at designated place and as directed by EIC all complete in toilet and bathroom combined up to shaft of the house as per direction of EIC. |
| 49 | Demolishing & removing of old existing sanitary fittings like sink including removal of all sanitary related concealed fittings like trap, bend, pipe including stacking of serviceable material and disposal of rubbish to the dump areas within the township premises at designated place and as directed by EIC all complete in kitchen up to shaft of the house as per direction of EIC. |
| 50 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) of approved by EIC with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required as directed by EIC : W.C. pan with ISI marked white solid plastic seat and lid |
| 51 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) of approved by EIC with 100mm sand PVC/Cast iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. |
| 52 | Providing and fixing C.P. brass Grab bar of approved make: size 300mm |
| 53 | Providing and fixing C.P. brass hand held health faucet with 1 meter long easy flexible tube in chrome finish and wall hook all complete |
| 54 | Providing and fixing white chinaware oval type counter wash basin approved make with CP waste of required size : 560x410 mm |
| 55 | Providing and fixing wash basin of approved make with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 560x410 mm |
| 56 | Providing and fixing quarter turn C.P. brass wash basin mixer of approved make : 15 mm nominal bore. |
| 57 | Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge |
| 58 | Providing and fixing quarter turn C.P. brass angle valve for basin mixer and geyser points of approved make, conforming to IS:8931 : 15 mm nominal bore |
| 59 | Providing and fixing C.P. brass soap Dish of approved make. |
| 60 | Providing and fixing C.P. brass shower rose with arm 200mm with 15 or 20 mm inlet of approved make: 100 mm shower |
| 61 | Providing and fixing C.P. brass towel rod of approved make: size 600mm x20mm |
| 62 | Providing and fixing C.P. brass bib cock approved by EIC conforming to IS:8931: 15 mm nominal bore |
| 63 | Providing and fixing C.P. brass wall mixer with provision for overhead shower with bend pipe: 15 mm nominal bore of approved by EIC. |
| 64 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved make) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 65 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 66 | Providing and fixing PVC 100mm floor trap / Nahani Trap |
| 67 | Providing and fixing Stainless steel circular grating of approved make of size upto 150 mm dia for floor trap |
| 68 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983, of approved make with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board including waste coupling: minimum size 505x950 mm bowl depth 225 to 250mm. |
| 69 | Providing and fixing C.P. brass kitchen sink mixer approved make: 15 mm nominal bore |
| 70 | Providing and fixing P.V.C. waste pipe of approved make for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe : 40 mm dia |
| 71 | Providing and fixing C.P. brass towel ring of approved make |
| 72 | Providing and fixing Braided hoses connection pipe suitable for geysers with brass unions :15 mm nominal bore up to 45 cm length |
| 73 | Providing and fixing CP connection pipe suitable for geysers with brass unions :15 mm nominal bore up to 45 cm length |
| 74 | Providing and fixing on wall face unplasticised Rigid PVC waste water pipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes including all fittings like bend, T, Y, collar, Nahani trap and any other type of fitting of required degree with access door as required, insertion rubber washer 3 mm thick, including necessary clamps in walls etc complete including testing.(All measurement will be in running meter along the center line of pipe) : 75 mm diameter |
| 75 | Providing and fixing on wall face unplasticised Rigid PVC waste water pipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes including all fittings like bend, T, Y, collar, Nahani trap and any other type of fitting of required degree with access door as required, insertion rubber washer 3 mm thick, including necessary clamps in walls etc complete including testing.(All measurement will be in running meter along the center line of pipe) : 100/110 mm diameter |
| 76 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. |
| 77 | 20 mm nominal dia Pipes |
| 78 | 25 mm nominal dia Pipes |
| 79 | 40 mm nominal dia Pipes |
| 80 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work |
| 81 | 20 mm dia nominal bore |
| 82 | 25 mm dia nominal bore |
| 83 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete of size from 15mm-40mm |
| 84 | Supplying and fixing C.I. cover 300x300 mm with frame for gully trap (standard pattern) the weight of cover to be not less than 4.5kg. |
| 85 | Removing and refixing of installed modular kitchen below counter including materials shifting to and fro, it would be store within the township premises at designated place and as directed by EIC all complete |
| 86 | Providing of Brass Ball cock of approved make, colour and make complete with Epoxy coated aluminium rod with plastic ball approved by EIC. |
| 87 | 20mm nominal bore |
| 88 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with threaded cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete (fitting shall be paid separately) including taking out old tank & other fittings and depositing in maintenance office but excluding the base support for tank ( if required). Please Enable Macros to View BoQ information |
