|
| 1 | Supply and fixing of decorative bollard light in 1000mm height suitable for 10W LED, IP66. Light output of source is more than 110lm/ watt, CRI)80, operating voltage 140-270V, wired with Branded LEDs of Osram/ Cree and Fulham, constant voltage/current driver with efficiency)85%, power factor)0.9, THD(=10%. The CCT of led will be 3000k/4000k/5000k as required by the project. Proper thermal management for longer life of fixture. Led burning of 50,000 hours, IP65. Fitting is complete in all aspects (incl.foundation bolts, foundation, wiring, conduiting, etc). Make:- Havells/Philips/Vak with prior approval of EIC. |
| 2 | Supply and laying of red murram soil on footpath along boundary wall including compacting with vibratory roller (8-12ton)to achieve the desired density, complete as per technical clause 401 of MORTandH technical specifications, watering,etc complete in all respect |
| 3 | Design, Supply, Installation, Testing and Comissioning of Water sprinkler system comprising of following HDPE pipe line supply and laying along foothpath complete in all respect incl. Trenching, backfilling, earthing, necessary fixtures/acessories such as tees, bends, reducers, end caps, cable, etc:- Supply and installation of 90mm HDPE pipe (PN6). Make- Duraline/Supreme/Jain with prior approval of EIC. |
| 4 | Design, Supply, Installation, Testing and Comissioning of Water sprinkler system comprising of following HDPE pipe line supply and laying along foothpath complete in all respect incl. Trenching, backfilling, earthing, necessary fixtures/acessories such as tees, bends, reducers, end caps, cable, etc:-Supply and installation of 75mm HDPE pipe (PN6) Make- Duraline/Supreme/Jain with prior approval of EIC. |
| 5 | Design, Supply, Installation, Testing and Comissioning of Water sprinkler system comprising of following HDPE pipe line supply and laying along foothpath complete in all respect incl. Trenching, backfilling, earthing, necessary fixtures/acessories such as tees, bends, reducers, end caps, cable, etc:-Supply and installation of 63mm HDPE pipe (PN6) Make- Duraline/Supreme/Jain with prior approval of EIC. |
| 6 | Design, Supply, Installation, Testing and Comissioning of Water sprinkler system comprising of following HDPE pipe line supply and laying along foothpath complete in all respect incl. Trenching, backfilling, earthing, necessary fixtures/acessories such as tees, bends, reducers, end caps, cable, etc:-Supply and installation of UPVC pipe 40mm, 6kg/sqcm Make- Finolex/Supreme/Jain with prior approval of EIC. |
| 7 | Design, Supply, Installation, Testing and Comissioning of Water sprinkler system comprising of following HDPE pipe line supply and laying along foothpath complete in all respect incl. Trenching, backfilling, earthing, necessary fixtures/acessories such as tees, bends, reducers, end caps, cable, etc:-Supply and installation of ASTM pipe 20mm schedule 40 Make- Finolex/Supreme/Jain with prior approval of EIC. |
| 8 | Supply and erection of MS pedestal of size 600x800x300mm including following meter: MCCB 100A 4pole 25K-1bus bar copper 100A 4pole - 1TPN MCB 63A-2 and 100A bus bar timer :- Quartz Analog/ Digital 24hour operation (LandT/ Siemens/ Schnider) Contactor:- 3pole 40A, 415Volt. (LandT/Seimens / Schnider) to complete the job in all respect upto the entire satisfaction of Engineer-In-Charge of the work |
| 9 | Supply, erection, testing and comiissioning of 3phase automatic timer AMSON`s/LandT/Schnieder Make on/off the street lights of different fixed timing maintainable on street lights pedestal, pillar, wall MS pedestal where on/off point is available, cabinet is fabricated from 22 gauge, painting, wiring connection on/off from bottom of the cabinet, 3contractor 63amp, 24volts DC each tranformer, rectifier system switching system, bakelite contractor 63amp, MCB 63amp LandT digital timer Auto/Manual system, time setter, fiber sheet, rubber and plastic component, wiring and component fitting, chemical (epoxy) including the cost of labour and material required to complete the job in all respect upto the satisfaction of Engineer In charge. |
| 10 | Design, Supply, Installation, Testing and Comissioning of Water sprinkler system comprising of following HDPE pipe line supply and laying along foothpath complete in all respect incl. Trenching, backfilling, earthing, necessary fixtures/acessories such as tees, bends, reducers, end caps, cable, etc:-Supply and installation of Spray pop up. Make- Rain bird/Hunter/K-Rain with prior approval of EIC. |
| 11 | Design, Supply, Installation, Testing and Comissioning of Water sprinkler system comprising of following HDPE pipe line supply and laying along foothpath complete in all respect incl. Trenching, backfilling, earthing, necessary fixtures/acessories such as tees, bends, reducers, end caps, cable, etc:- Supply and installation of SS service saddle 40mmx20mm. ISI marked with prior approval of EIC |
| 12 | Design, Supply, Installation, Testing and Comissioning of Water sprinkler system comprising of following HDPE pipe line supply and laying along foothpath complete in all respect incl. Trenching, backfilling, earthing, necessary fixtures/acessories such as tees, bends, reducers, end caps, cable, etc:-Supply and installation of Ball valve 40mm. Make- Harish/Supreme/Jain with prior approval of EIC. |
| 13 | Design, Supply, Installation, Testing and Comissioning of Water sprinkler system comprising of following HDPE pipe line supply and laying along foothpath complete in all respect incl. Trenching, backfilling, earthing, necessary fixtures/acessories such as tees, bends, reducers, end caps, cable, etc:Supply and installation of Monoblock pump 10HP. Make:- Kirloskar/Crompton/Havells with prior approval of EIC. |
| 14 | Design, Supply, Installation, Testing and Comissioning of Water sprinkler system comprising of following HDPE pipe line supply and laying along foothpath complete in all respect incl. Trenching, backfilling, earthing, necessary fixtures/acessories such as tees, bends, reducers, end caps, cable, etc:Supply and installation of Starter panel for motor. Make- LandT/Siemens/Schnieder with prior approval of EIC. |
| 15 | Design, Supply, Installation, Testing and Comissioning of Water sprinkler system comprising of following HDPE pipe line supply and laying along foothpath complete in all respect incl. Trenching, backfilling, earthing, necessary fixtures/acessories such as tees, bends, reducers, end caps, cable, etc Supply and installation of By pass assy for motor |
| 16 | Design, Supply, Installation, Testing and Comissioning of Water sprinkler system comprising of following HDPE pipe line supply and laying along foothpath complete in all respect incl. Trenching, backfilling, earthing, necessary fixtures/acessories such as tees, bends, reducers, end caps, cable, etc:- Design, Testing and Comissioning of Water sprinkler system with prior approval of EIC. |
| 17 | [11.58]Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete [Through Rate] |
| 18 | [11.98.1]Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. 1. New work (Two or more coats applied @ 1.43 litre/ 10 sqm Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm [Through Rate] |
| 19 | [17.13]Granular Sub-Base (Mix in place) Construction of granular sub-base by providing Material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with Rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per technical clause 401 of MORT&H technical specifications [Through Rate] |
| 20 | [17.2.3]Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness, as per technical clause 201 of MORTandH specifications. 3. In area of light jungle (By Mechanical Means) [Through Rate] |
| 21 | [17.5.3]Compacting Original Ground 3. Compaction of Earthwork Compaction of & preparation of sub grade including loosening, levelling of earth 225 mm thick top layer, rough dressing of soil, final dressing of earth to give level, camber, watering, rolling with road roller, compacting the bed to achieve minimum dry density as given in the Table 3000-2 as per technical clause 305 of MORT&H specifications [Through Rate] |
| 22 | [17.61.1]PIPE CULVERTS 1. Providing and Laying 600 mm dia Reinforced Cement Concrete Pipe NP3 / NP-4P /prestressed Concrete Pipe on First Class Bedding in Single Row Providing and Laying Reinforced cement concrete pipe NP3 /NP-4/prestressed concrete pipe for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets 1000 mm dia, as per clause 2900 of MORT&H specifications [Through Rate] |
| 23 | [21.87.1.2]Constructing brick masonry road gully chambers as per standard drawings (as per sizes given below) including dressing of beds and sides of chambers to exact profiles, 15cm thick lime concrete 16:24:100 (as per specified in item No.10.6) in foundations 1st class brick work laid in cement sand mortar 1:5, 40 mm thick cement concrete 1:2:4 topping inside the chamber with a floating coat of 1.5mm thick neat cement laid in one operation to the topping, the entire inner surface of the chamber rendered with neat cement not less than 12mm in thickness of 1:2 cement sand plaster and finished with floating coat of neat cement 1 mm thick left absolutely smooth polished and correct to templates including labour for fixing the C.I. road gully grating and frame including painting with coal tar (as Specified in item No. Item 21.48) complete to the requirement of the Engineer in-charge 1.2. Single road gully chamber - Size.-610 mmx457 mmx1105mm [Through Rate] |
| 24 | [23.22.2.1]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 2.1. MCCB Enclosure made of Sheet Steel suitable for mounting MCCB of following ratings MCCB up to 125 A FP [Through Rate] |
| 25 | [23.22.5.1]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.1. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole [Through Rate] |
| 26 | [23.22.6.6]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 6.6. Supply and erection double pole/Four pole Residual (RCCB/ELCB) on 240/415V, 5Hz. AC supply installed in existing sheet steel enclosures including making necessary connections and bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. FP RCCB 30ma sensitivity , 63 A [Through Rate] |
| 27 | [23.5.6.2]COPPER WIRING IN EXISTING PVC/MS CONDUIT PIPE SURFACE/RECESSED FOR ELECTRICAL POINTS 6.2. Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 1 run of Size 2.50 Sqmm(1.1.80mm) [Through Rate] |
| 28 | [23.7.6.2]PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.2. Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 25 mm dia. [Through Rate] |
| 29 | [24.11.24]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING AND ERECTION/LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR CABLE 0.75 METER BELOW GROUND LEVEL COVERED WITH SAND AND BRICKS INCLUDING EXCAVATION AND REFILLING OF TRENCHES 24. 16 Sq mm 4 core (Arm.) [Through Rate] |
| 30 | [24.5.2.3]MISCELLANEOUS ITEMS 2.3. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 63/50 mm outer dia/inner dia [Through Rate] |
| 31 | [3.1.2]By Mechanical Transport including loading, unloading and stacking 2. Earth [1km] |
| 32 | [6.39.1]Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete. 1. 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). [Through Rate] Please Enable Macros to View BoQ information |
