|
| 1 | Design, manufacturing, supply, installation, testing and commissioning of 250 kVA, 3 phase, 4wire, 415 V, 50 Hz DG set in acoustic enclosure with Auto ON/OFF provision during power failure along with control wiring and all accessories as per attached tech. specification Doc No. TS-1 |
| 2 | Design, manufacturing, supply, installation, testing and commissioning of 125 kVA, 3 phase, 4 wire, 415 V, 50 Hz DG set in acoustic enclosure with Auto ON/OFF provision during power failure along with control wiring and all accessories as per aattached tech. specification DocNo. TS-2 |
| 3 | Supply, Installation, Testing and Commissioning of LT AMF panel for Auto/Mains failure function for 250 kVA DG set, including Control wiring and all accessories as per attached specification TS Doc. No. TS-3 |
| 4 | Supply, Installation, Testing and Commissioning of AMF panel for Auto/Mains failure function for 125 KVA DG Set including Control wiring and all accessories at Anuvihar and CGH as per attached tech. specification Doc. No. TS -4 |
| 5 | Supply, Installation, Testing and Commissioning of New LT Panel with 2 incomers and 1 Bus Coupler as per attached tech. specification Doc. No. TS-5 |
| 6 | Adopter box (enclosure) for outdoor installation IP-65 with 250A, 4P, 50 KA (MCCB), with copper bus bar. The required setup is an MCCB Enclosure designed for termination of 3.5C X 400 Sqmm Al condcutor, LT Cable as per attached tech. specification Doc. No. TS-6 |
| 7 | SITC of 990 litres M.S. fuel day tank with necessary fittings like explosion proof level indicator for local as well remote monitoring with GCU communication protocol along with Fuel Piping connection from day tank to Generator tank for 250kVA DG Set as per attached tech. specification Doc. No. TS-7 |
| 8 | SITC of 3.5 C X 185 sq.mm armoured, XLPE, 1100V, Aluminium conductor cable as per attached tech. specification Doc. No. TS-8 |
| 9 | SITC of 10C X 2.5 sq.mm, armoured XLPE, CU conductor cable for control wiring as per attached tech. specification Doc. No.-9 |
| 10 | SITC of 4C X 2.5 sq.mm armoured XLPE LT CU conductor cable for controll wiring as per attached tech. specification Doc. No. TS--10 |
| 11 | Supply, installation, testing and commissioning of end termination with double compression brass gland and Heavy duty long barrel crimping type copper lugs of 3.5 C X 185 Sq. mm Aluminium Conductor as per attached tech. specification Doc. No. TS-11 |
| 12 | End termination of 4CX2.5 sq. mm. cu conductor cable with copper lugs as per attached tech. specification Doc. No. TS-12 |
| 13 | End termination of 10CX2.5 sq. mm. cu conductor cable with copper lugs as per attached tech. specification Doc. No. TS-13 |
| 14 | Supply, installation, testing and commissioning of end termination with double compression brass gland and Heavy duty long barrel crimping type copper lugs of existing 3.5 C X 50 Sq. mm Aluminium Conductor as per attached tech. specification Doc. No. TS-14 |
| 15 | Insulating Mats-Supply of fine ribbed electrically tested safety matting for elctrical panel as per attached tech. specifiation Doc. No. TS- 15 |
| 16 | Providing bricks and sand protection (75 mm below the cable) for power and control cables as per attached drawing. |
| 17 | Providing earth station with Copper plate ( 600mm x 600mmx 3.15 mm)as per IS: 3043. earth excavation min. to a depth of 3 mtr from ground level in all types of soils for supply & laying of electrode including charcoal, salt, brick masonary chamber, white wash,cast iron hinged cover & testing of earth resistance values,marking earth resistance values on the earth pit chamber as per attached drawing. |
| 18 | Supply & Installation of two run 25mm x 6mm Copper Flat/strip for DG Set Body and Neutral earthing and interconnection of earth pits |
| 19 | Underground Augering for road crossing of LT cable of 125mm dia. |
| 20 | SITC of 125 mm dia HDPE Pipe as per attached tech. specification Doc. No. TS-15 |
| 21 | SITC of Cable route markers as per attached drawing |
| 22 | Earth excavation and back filling in all type of soil for cable trenches, for laying of cables & disposal of excess earth as directed by Engineer-in-Charge. |
| 23 | Manual earth excavation & back filling soil for cable trench for laying of cables as directed by Engineer-in-Charge . |
| 24 | Supply, Laying and Levelling of 40mm and 30mm mixed Graded metals in switchyard for Substation yard at CGH and Anuvihar colony |
| 25 | Supply, Installation of 150mm dia NP2 type hume pipe as directed by Engineer-in-Charge . |
| 26 | MS Roofing Sheet for shed as per TS -16 |
| 27 | M30 Reinforced cement concrete for DG set foundation including shuttering items as per directed by EIC |
| 28 | PCC( 1:2:4) for foundation including shuttering items as per directed by EIC |
| 29 | Reinforcement steel for foundation of DG set as per DG set foundation drawing. |
| 30 | SITC of structural Steel for shed work as directed by Engineer-in-Charge. |
| 31 | Bricks wall work with plastering as directed by Engineer-in-Charge . |
| 32 | Supply and Installation of Chain link Fencing for substation as per specification TS-17 & as directed by Engineer-in-Charge . |
| 33 | Testing of electrical installation ( Substations) viz. transformers , HT and LT Power panels, cables, earth stations, Praparation of test reports and required documents for inspection from statuary/CEA body and approval from CEA at Anuvihar colony and city guest house. Please Enable Macros to View BoQ information |
