|
| 1 | Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq. m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. |
| 2 | All kinds of soil |
| 3 | Rubble packing with available hard laterite stone from site including watering ramming and consolidating etc. in pipeline trenches and other foundations complete |
| 4 | Providing & laying cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded granitic or basaltic stone aggregate 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: |
| 5 | All works upto plinth level |
| 6 | Laterite masonry in neatly dressed stones of size as specified in cement mortar 1 : 5 (1 cement : 5 coarse sand) in foundation and basement. |
| 7 | Laterite masonry in neatly dressed stones of size as specified in cement mortar 1 : 5 (1 cement : 5 coarse sand) in foundation and basement. +Extra for laterite masonry in all size in superstructure from floor I level upto floor V level |
| 8 | Centering & shuttering including Strutting, Propping & removal of forms for |
| 9 | Foundations, Footings, Bases for columns etc. |
| 10 | Centering & shuttering including Strutting, Propping & removal of forms for |
| 11 | Columns, Piers, Pillars, Aburments, Posts and struts (square rectangle polygon in plan) |
| 12 | Providing TMT steel reinforcement bars of (SAIL, TATA, VIZAG, JSW Steel Ltd.) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member. |
| 13 | Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) |
| 14 | All works upto plinth level |
| 15 | in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and structs etc. upto floor five level |
| 16 | 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge. |
| 17 | 12mm cement plaster 1:4 (1 cement : 4 fine sand) |
| 18 | Kotah stone slab flooring over 20 mm (average) thick base laid over jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & complete with base of cement mortar 1:4 (1cement : 4 coarse sand) |
| 19 | 25 mm thick. |
| 20 | Steel work in built up tubular (round, square or rectangular hollow tubes etc) (Square Hollow Section (SHS) IS4923 / RECTANGULAR Hollow Section (RHS) IS4923 Circular Hollow Section (CHS) ISW1161 closed structulral Steel of (SAIL, TATA, VIZAG, JSW, APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 21 | Providing and fixing Colouron plus galvulium roofing sheets of 0.5 mm thick double ribbed trapezoidal profile coated 1080 mm with cover width of 1020 mm including all the accessories (JSW or equivalent make) but excluding the cost of purlins, rafters, trusses, flashings etc. |
| 22 | Add for providing & fixing Flashings - [Comers, Ridges, valleys, gable end & Trims] (Girth upto 610 mm) including all the accessories complete as per the directions of the Engineer in charge |
| 23 | Distempering two or more coats with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade. |
| 24 | Painting two or more coats (excluding priming coat) with ordinary ready mixed paint of approved brand & manufacture in all white or green shade on new work to give an even shade. |
| 25 | Providing and fixing prefabricated compound gate of G.I. pipes 40 – 50 mm dia (medium) with 12mm M.S. square bars of G.I. pipes grill work as per drawing including providing & fixing locking arrangements, pintals, hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 granitic or basaltic aggreate 20mm nominal size) including applying priming coat with ready mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction complete. |
| 26 | Colour washing such as green, blue or buff on new work ( two or more coats) including a base coat of white washing with lime to give an even shade. Please Enable Macros to View BoQ information |