|
| 1 | Supply and fixing in replacement of suction sweeper assembly (all parts) made out of MS sheet of suitable size as per existing including plastic bristles (brush) for cleaning of floor of swimming pool and inlet pipe 40m dia GI pipe approximate 6 inch long for dewatering duly welded and other end threaded on suction sweeper assembly along with plastic wheels and two movable hinges for lifting the assembly during operation complete all as specified and as directed by Engineer-in- Charge. |
| 2 | Supplying and adding Crystal alum of superior quality as directed and approved by Engineer-in-Charge |
| 3 | Supply and fixing PVC branded helical pipe 40 mm/50mm dia( flexible ) suitable to suction sweeper and pumping set alongwith plastic balls for floating of pipe complete all as approved and directed by Engineer-in-Charge. |
| 4 | Supply and fixing in replacement nylon rope 15 mm dia twisted of superior quality complete all as directed by Engineer-in-charge. |
| 5 | Supply and fixing in replacement star delta starter in sheet metal enclosure suitable for 25HP motor pump complete all as directed by Engineer-in- Charge |
| 6 | M & L for preparation of old steel and iron surfaces of any description over 10cm in width or girth and applying two coat of synthetic enemal paint of any tint complete all as specified and directed by Engineer-in-Charge. |
| 7 | M & L for taking out CI Non return valve of any size and refixing the same in original positions after fixing leather buffalow complete all as directed by Engineer-in-charge.Note - Rate of leather buffalow /nut bolts and rubber sheet will be included in this item . |
| 8 | M & L for oil immersed graphite gland packing off sizes of superior quality complete all as directed by Engineer-in-charge. |
| 9 | Dewatering/bailing out muddy staganated water from pool of capacity 3000 Cum and balancing tank manually or with the help of non clogging pumping set,inner wall scrapping out silt,algae etc from side wall and floors by cleaning steel wire brush ,brooming etc and washing the side walls and floor with caustic soda solution and washing again with clear water after washing the same with caustic soda solution. Note :- Contractor shall provide necessary arrangement at his own cost and will make goods to disturbed surface.No extra cost shall be paid on this account. |
| 10 | Material and labour for opening of cylindrical type pressure filter of capacity 36000 GPH and size 2.5 mtr in dia and 5.5 mtr in length including removing the old filter media, removing all the scaling deposited on the inner surface area of filter assembly by using wire bursh and cleaning the inner filter surface by bleaching poder, soda ash, refilling new filter media for topping up/making up the unserviceable media of various silica grade as directed at site without any breakage in inner assembly. reassembling the filter assembly and apply one coat of good quality paint on the outer surface area of the filter assembly and testing for proper functioning and testing complete all as specified and as directed by Engineer-in-Charge. Note :- 1.Firstly removed all Old Filter Media and refilling the same after cleaned it & Topping up new filter media shall be measured and paid for separately under respective items here-in-after as supply only. |
| 11 | Supply and adding Caustic soda complete all as specified and directed by Engineer-in-Charge. |
| 12 | Supply only washed and cleaned filter media gravels in accordance with IS: 8419 Part-l, hard and preferably rounded with average specific gravity not less than 2.5, free from clay, sand, loam and organic impurities of any kind, acid solubility not more than 10.00 % for gravel of size 12.0 mm to 40 mm for pressure type water filter complete all as specified and directed.Note :- Contractor shall provide the test report & purchase voucher of the above mentioned item. |
| 13 | Supply only filter media comprising of filter sand, in accordance with IS: 8419 Part-l, average specific gravity not less than 2.5, uniformity coefficient less than 1.5, Silica content tested in accordance with IS: 2000, any sample of filter sand shall not contain more than 5 percent by volume of impurities, such as clay, loam, silt, Loss in lgnition not more than 0.70 % Acid solubility not more than 5.00 % , particle size 1 mm to 6 mm, complete all as specified and directed.Note :- Contractor shall provide the test report & purchase voucher of the above mentioned item. |
| 14 | Supply and adding in swimming pool TCCA 90 granular base all as specified and as directed by Engineer-in-Charge. |
| 15 | Supply and fixing plastic brush on the bottom of bamboo for cleaning of algae in the deep (diving area) of Swimming Pool complete all as specified. |
| 16 | M & L for repair of internal pipeline of Pressure Filter along with repair of nozzle & certain welding inside cage structures holding the pipeline. Note. Cost of T&P required for the complete work job is deemed to be included in this rate. Nothing extra shall be paid on this account. |
| 17 | Supply and fixing an orange flexible hose pipe used for transferring liquefied gas, hose has a nominal bore of 8mm and maximum working pressure 1 Mpa ISI marked complete all as directed. |
| 18 | S&F in repair 80 mm dia sluice valve, ISI marked PN 1.6 confirming to IS both end flanged ,drilled , steel spindle and iron wheel handle , CI gate with MS ring including jointing material such as nuts, bolts, washers and rubber sheet etc complete all as directed. |
| 19 | All as per serial item No. 18 above but for 150 mm dia sluice valve. |
| 20 | All as per serial item No. 18 above but for 200 mm dia sluice valve. |
| 21 | All as per serial item No. 18 above but for 250 mm dia sluice valve. |
| 22 | Supply and fixing of PVC pipe of 20mm dia complete all as specified and directed by Engineer-in-Charge. |
| 23 | Supply and fixing in replacement of flat submersible copper cable, 4.00 sqmm 3 core, 1100volts, including minor accessories required for fixing with Suction Sweeper motor complete all as specified and directed by Engineer-in-Charge. |
| 24 | Supply and fixing in replacement floating ball required during suction sweeping work complete all as specified and directed by Engineer-in-Charge. |
| 25 | Supply and fixing in replacement wire brush to remove algae from tiles mannuanlly complete all as specified and directed by Engineer-in-Charge. |
| 26 | Dismantling of pumpset with motor including over hauling motor with pumpset of capacity 25 HP including copper rewinding, changes of gland bush, inserting of graphite gland, greasing, changes of tyre coupling and setting of alignment and refix the same place complete all as specified and directed by Engineer-in-Charge. |
| 27 | Comprehensive maintenance of swimming pool by the contractor providing one operator and one helper in each shift for continuous operation of swimming pool (two shifts starting from 0600hrs to 2200hrs) for entire time of swimming pool complete all as specified and directed by Engineer-in-Charge. |
| 28 | Frame work for base (same iron frame is used as per existing) of pumpset of capacity 25 HP, including dismantling and disconnecting of pump set with motor and refix the pumpset with electrically connection and testing by adjusting alignment, complete all as specified and directed by Engineer-in-Charge. |
| 29 | Supply and fixing in replacement strainer required for traping suspended particle like leaf of tree, insects etc from swimming pool mannuanlly complete all as specified and directed by Engineer-in-Charge. |
| 30 | M & L for comprssor oil for Air blower of make specified for use by manufacturer complete all as specified and directed by Engineer-in-Charge. |
| 31 | Supply and fixing stainless steel spindle of sluice valve 250mm dia including nuts,bolts,washers and rubber sheet after taking out the unserviceable spindle by opening the top of sluice valve complete all as specified and directed. |
| 32 | Supply and fixing stainless steel spindle of sluice valve 200mm dia including nuts,bolts,washers and rubber sheet after taking out the unserviceable spindle by opening the top of sluice valve complete all as specified and directed. |
| 33 | Supply and fixing stainless steel spindle of sluice valve 150mm dia including nuts,bolts,washers and rubber sheet after taking out the unserviceable spindle by opening the top of sluice valve complete all as specified and directed. |
| 34 | Dismantling the air blower of any capacity, 1440RPM, reciprocating type from the foundation and drain of comressor oil carefully and disconnecting electric motor connection and earthing etc and transportation to civil workshop for repair, opening the air blower and removing of defective piston rings, bearings and cleaning of piston and boring of cylinder if required and reassembling the complete air blower after replacement of bearing and piston rings and comressor oil and re-fixing at site and reassebmling with electric motor, earthing and testing the air blower on full load at site up to entire satisfaction of Engineer-in-charge. |
| 35 | Supply and fixing in replacement Electronic timer complete all as specified and directed. |
| 36 | Supply and fixing in repair over load relay suitable for 25HP star delta starter complete all as directed. |
| 37 | Supply and fixing in replacement direct on line starter in sheet metal enclosure upto 5HP with 9-14 Amp relay range complete all as directed by Engineer-in- Charge |
| 38 | Supply and fixing in replacement MCCB, 100 Amp, 415 Volts, 4Pole , 50 cycle, breaking capacity 25KA complete all as specified and as directed by Engineerin-charge. |
| 39 | Supply and fixing in replacement MCCB, 125 Amp, 415 Volts, 4Pole , 50 cycle, breaking capacity 25KA complete all as specified and as directed by Engineerin-charge. |
| 40 | Supply and fixing in replacement MCCB, 250 Amp, 415 Volts, 4Pole, 50 cycle, breaking capacity 36KA complete all as specified and as directed by Engineerin-charge. |
| 41 | Supply and fixing in repair power contactor 415 volt, 50 HZ, 3 pole, type ML-2 complete all as specified and directed. |
| 42 | Supply and fixing in repair power contactor 415 volt, 50 HZ, 3 pole, type ML-3 complete all as specified and directed. |
| 43 | Supply and fixing in repair Gun metal gate valve, heavy duty conforming to IS with iron wheel head screwed both ends suitable for fixing to G I pipe of 25 mm bore complete all as directed. |
| 44 | Repair and Maintenance of Mechanical Laundry including connected control Panel and carrying out routine check of the machine oiling, replacement of all the worn out parts such as nuts bolts washers, connectors, thimbles, lugs, greasing, replacement of defective safety devices, relays, control switch gears, alarms complete for smooth functioning complete all as per manufacturer's instructions and as directed. The Maint and Servicing has to be carried out through OEMThe Details and Specifications of the equipments are as follows :- (Loc-174 MH, 68 ER, 268 ER, 64 ER, 3 Mech). (a) Washing machine of 25Kg & 50Kg capacity having outer and inner stainless steel, electrically heated ,front loading ,auto reverse ,auto timed ,auto temperature controlled ,fitted with control panel and 3 phase electric motor etc complete - 15 Nos.(b) Tumble drier of 25Kg & 50Kg capacity front loading type having outer MS galvanised and inner stainless steel ,electrically heated ,auto reverse auto timed ,fitted with control panel ,blower and 3 phase electric motors etc complete - 16 Nos .(c) Hydro Extractor of 25 Kg capacity having outer MS galvanised and inner basket SS of AISI 304 quality self balancing with rubber buffer mounts fitted with brake ,starter and 3 phase electric motor etc complete - 02 Nos.(d) Air compressor with air tank pressure of 7 kg/sqcm to provide air to flat bed press and flat work ironer complete with electric motor of required capacity.- 01 No.(e) Vacuum ironing table of size 1480mm x 770mm x 830 mm with table top size 1250mm x 750mm with net weight 50 kg tubular constructionfitted with 2 nos shelves- 01 No.(f) Troller for wet and dry with holding capacity 50 kg of size 930mm x 630mm x 800mm with net weight 40 kg fully SS fitted with 4 nos sweveling type - 04 Nos.(g) Sluicing machine 7 Kg capacity electrically heated having two doors ,bucket ,wash motor, extractor motor,water inlet connections complete- 02 No.Note:-(i) The quotated rate shall include rate of minium items i.e oiling, greasing, rewiring of circuits, relays, contactors, push buttons, emergency switches, mcbs and rest all spares which are required for replacement during the maintenance period shall be measured and paid separately at supply only rates and cost of labour for fixing these spares shall be deemed to be included in the rate quoted for these items and nothing shall be paid extra on this account . (ii) The cost of transportation and other necessary equipment shall be arranged / brought by contractor to complete the job and no extra cost shall be paid to the contractor in this effect.etc complete all as directed. |
| 45 | Supply Only Bearing alongwith sleeves, bush as per size complete all as specified and directed by Engineer-in-charge. |
| 46 | Supply Only Over load relay complete all as specified and directed by Engineer-in-charge. |
| 47 | Supply Only Heating Element for Washing Machine 25 Kg 2/3 Kw complete all as specified and directed by Engineer-in-charge. |
| 48 | Supply Only Microprocessor Board with display for 25 Kg Washing Machine complete all as specified and directed by Engineer-in-charge. |
| 49 | Supply Only Variable Frequency Drive (VFD) complete all as specified and directed by Engineer-in-charge. |
| 50 | Supply Only Drain Valve complete all as specified and directed by Engineer-in-charge. |
| 51 | Supply Only Drain Hose Pipe complete all as specified and directed by Engineer-in-charge. |
| 52 | Supply Only Motor Belts of size B 61 to B 108 complete all as specified and directed by Engineer-in-charge. |
| 53 | Supply Only Supply only contactor ML-1.5 complete all as specified and directed by Engineer-in-charge. |
| 54 | M & L for Servicing and overhauling of motor capacity upto 2 HP capacity including replacement of wornout bearing and bushes etc complete all as directed. |
| 55 | M & L for Servicing and overhauling of motor capacity 7.5 HP capacity including replacement of wornout bearing and bushes etc complete all as directed. |
| 56 | Supply only MCCB 4 pole 415 volt of capacity 630 Amp,breaking capacity not less than 36 KA ,thermal setting 80-100%,Ics=100% Icu,confirming to IEC-947,IS-1347,including thimble,nuts,bolts washer complete all as directed. |
| 57 | Supply only MCB 4 pole 415 volt of capacity 63 Amp,including thimble,nuts,bolts washer complete all as directed. |
| 58 | Supply only MCB 4 pole 415 volt of capacity 32 Amp,including thimble,nuts,bolts washer complete all as directed. |
| 59 | Supply only 32 Amps TPN Distribution board with three pin metal clad industrial plug and socket including nuts,bolts washer complete all as directed. |
| 60 | Supply only single phase preventor, type VSP 2/3 suitable for 3 phase complete all as specified and directed by Engineer-in-charge. |
| 61 | Supply only power Contactors 415 volts, 50 cycles, 3 phase, MNX-18 complete all as directed. |
| 62 | Supply only power Contactors 415 volts, 50 cycles, 3 phase, MNX 25 complete all as directed. |
| 63 | supply only Power contactor 3TS 47 of capacity 100A AC1 complete all as specified and directed. |
| 64 | supply only Power contactor 3TS 48 of capacity 100A AC1 complete all as specified and directed. |
| 65 | M&L for earthing complete with galvanized iron of steel or earth plate Each electrode of size 600mm x 600mm x 6mm thick buried directly in ground. Vertically total depth not less than 2.25 mtr below normal ground level with top edge of earth plate at depth of not less than 1.5 mtr below ground level surounded from all sides with alternate layers of charcoal and common salt and connected to GI earth strip 25mm x 4 mm thick by means of GI bolts, nuts washers & check nuts and soldering the strip, electrode connected to panel board or on poles or on transformer (including making of test point with GI strip of size 25mm x 4 mm) including GI protection pipe 40 mm light grade dia for protection of strip upto test point all as directed GI pipe medium grade 20 mm bore for watering including providing funnel and wire mesh CI frame and 10 cm thick suitably reinforced RCC pit cover PCC chamber pit with PCC 1:3:6 type C2 using 40 mm graded stone aggregates complete including excavation and earth work, all as specified and PCC pit shall be provided at least 50 cm away from the earth pit and not just on earth pit including testing on completion. |
| 66 | Supply only sensor for auto water filling in drum complete all as directed. |
| 67 | Supply only strip heater 2 KW of ISI marked complete all as directed. |
| 68 | Supply and fixing in repair PVC water tank of capacity 2000 ltrs complete all as specified and directed by Engineer-in-Charge. |
| 69 | Repair and maintenance of electric Passenger lift - 03 Nos (Loc:-174 MH, Sagat Singh Auditorium) of capacity of 26 passenger (1768 Kg), 20 passenger (1360 Kg) and 7 passenger (476 Kg) respectively , lift at speed 1m/s equipped with microprocessor based AC VVF controller, AC Motor, Governor, ropes, driving sheave, travelling cables, wiring & electric fitting, ARD, hooter as per maintenance shcedule and manufacture's maintenance manual complete all as specified by Engineer-in-Charge.The above maintenance shall be done through OEM of lift. Note:-(i) The quotated rate shall include rate of minium items i.e oiling, greasing, rewiring of circuits, relays, contactors, push buttons, emergency switches, mcbs and rest all spares which are required for replacement during the maintenance period shall be measured and paid separately at supply only rates and cost of labour for fixing these spares shall be deemed to be included in the rate quoted for these items and nothing shall be paid extra on this account . (ii) The cost of transportation and other necessary equipment shall be arranged / brought by contractor to complete the job and no extra cost shall be paid to the contractor in this effect.etc complete all as directed. |
| 70 | Supply Only Flooring mat complete all as specified and directed by Engineer-in-charge. |
| 71 | Supply Only Door sensor complete all as specified and directed by Engineer-in-charge. |
| 72 | Supply Only door safety shoe complete all as specified and directed by Engineer-in-charge. |
| 73 | Supply Only Limit Switches complete all as specified and directed by Engineer-in-charge. |
| 74 | Supply Only Cabin/Car operating panel complete all as specified and directed by Engineer-in-charge. |
| 75 | Supply Only Junction box complete all as specified and directed by Engineer-in-charge. |
| 76 | Supply Only Read sensors complete all as specified and directed by Engineer-in-charge. |
| 77 | Supply Only 4ft LED tube light complete all as specified and directed by Engineer-in-charge. |
| 78 | Supply Only Exhaust fan complete all as specified and directed by Engineer-in-charge. |
| 79 | Supply Only control transformer relay complete all as specified and directed by Engineer-in-charge. |
| 80 | Supply Only brake releasing lever complete all as specified and directed by Engineer-in-charge. |
| 81 | Supply Only car guide shoe complete all as specified and directed by Engineer-in-charge. |
| 82 | Supply Only indicator switch complete all as specified and directed by Engineer-in-charge. |
| 83 | Supply Only landing door hanger complete all as specified and directed by Engineer-in-charge. |
| 84 | Supply Only emergency switch complete all as specified and directed by Engineer-in-charge. |
| 85 | Supply only battery 12V 7AH complete all as specified and directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
