|
| 1 | Providing & laying Selection no. 1 grass turf with earth50mm to 60mm thickness on existing ground preparedwith proper level and ramming with required toolswooden and than rolling the surface with light roller makethe surface smoothen and light watering the same, asper direction of officer in charge |
| 2 | Preparation of beds for hedging and shrubbery byexcavating 60 cm deep and trenching the excavatedbase to a further depth of 30 cm, refilling the excavatedearth after breaking clods and mixing with sludge ormanure in the ratio of 8:1 (8 parts of stacked volume ofearth after reduction by 20% one part of stacked volumeof sludge or manure after reduction by 8%), flooding withwater, filling with earth if necessary, watering and finallyfine dressing, leveling etc. including stacking anddisposal of materials declared unserviceable and surplusearth by spreading and leveling as directed, within a leadof 50 m, lift up to 1.5 m complete (cost of sludge, manureor extra earth to be paid for separately) |
| 3 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed withmanure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth afterreduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding withwater, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts(cost of manure, sludge or extra good earth if needed to be paid for separately)Holes 1.2 m dia and 1.2 m deep |
| 4 | Providing and Displaying Fishtail palm well developedwith fresh & healthy foliage leaves of ht 210 to 240cmSpecimen plant in 35 cm Cement Pot as per direction ofthe officer-in-charge |
| 5 | Providing and stacking of Tecoma stans of height 90-105cm. bushy in big size HDPE bag as per direction of theofficer-in-charge. |
| 6 | Providing and stacking of Thuja compacta of height 75-90 cm., conical shaped, well formed with healthy foliagein earthen pots of size 30 cm as per direction of theofficer-in-charge. |
| 7 | BOQ HORTICULTURE (SOR MORTH-2024-25) Grassing with ' Doobs' Grass (Grassing with 'Doobs' grassincluding watering and maintenance of the lawn for 30 days ormore till the grass forms a thick lawn free from weeds and fitfor moving including supplying good earth if needed) In rows 7.5 cm apart in either direction |
| 8 | a) Planting Permanent Hedges including Digging of Trenches(Planting permanent hedges including digging of trenches, 60cm wide and 45 cm deep, refilling the excavated earth mixedwith farmyard manure, supplied at the rate of 4.65 cum per100 metres and supplying and planting hedge plants at30 cm apart) |
| 9 | BOQ CIVIL (DSR 2023) Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 10 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 11 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) |
| 12 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per SQM, including pointing in white cement mixed with pigment of matching shade |
| 13 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge |
| 14 | Distempering with 1st quality acrylic distemper (ready mixed) having VOCcontent less than 50 gram/litre, of approved manufacturer and of requiredshade and colour all complete to achieve even shade and colour New work (two or more coats) over and including waterthinnable priming coat with cement primer having VOC contentless than 50 gram/litre |
| 15 | Finishing walls with ready mixed Premium acrylic emulsion paint (CompanyDepot Tinted) having VOC less than 50 gm/litre and UV resistance as perIS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint ofrequired shade with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqmover and including priming coat of exterior primer applied @0.90 litre/10 sqm |
| 16 | Painting with synthetic enamel paint of approved brand and manufactureof required colour to give an even shade : Two or more coats on new work over an under coat of suitableshade with ordinary paint of approved brand and manufacture |
| 17 | Providing and fixing stainless steel ( Grade 304) railing made of Hollowtubes, channels, plates etc., including welding, grinding, buffing, polishingand making curvature (wherever required) and fitting the same withnecessary stainless steel nuts and bolts complete, i/c fixing the railingwith necessary accessories & stainless steel dash fasteners , stainlesssteel bolts etc., of required size, on the top of the floor or the side of waistslab with suitable arrangement as per approval of Engineer-in-charge,(for payment purpose only weight of stainless steel members shall beconsidered excluding fixing accessories such as nuts, bolts, fastenersetc.). |
| 18 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) POLES s etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including weldingand bolted with special shaped washers etc. complete. ( 70X70X3) UNIT WEIGHT 6.28 |
| 19 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including weldingand bolted with special shaped washers etc. complete. ( 40X40X3 ) UNIT WEIGHT 3.45 |
| 20 | Providing and fixing precoated galvanised iron profile sheets (size, shapeand pitch of corrugation as approved by Engineer-in-Charge) of totalcoated thickness 0.50 mm (base metal of minimum 0.45 mm thicknesswith total coating thickness of 0.05mm) with zinc coating 120 grams persqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer onboth side of the sheet and polyester top coat 15-18 microns. Sheet shouldhave protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12metre or as desired by Engineer-in-charge. The sheet shall be fixedusing self drilling /self tapping screws of size (5.5x 55 mm) with EPDMseal, complete upto any pitch in horizontal/ vertical or curved surfaces,excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required. |
| 21 | Laying at or near ground level old kerb stones of all types in position to therequired line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thicknessof joints, except at sharp curve, shall not be more than 5 mm), includingmaking drainage opening wherever required etc. complete as per directionof Engineer-in-charge. (Length of finished kerb edging shall be measuredfor payment). (Old kerb stones shall be supplied by the department freeof cost) |
| 22 | Designing, fabricating, testing, installing and fixing in position CurtainWall with Aluminium Composite Panel Cladding, with open grooves forlinear as well as curvilinear portions of the building , for all heights and alllevels etc. including: (a) Structural analysis & design and preparation of shop drawings forpressure equalisation or rain screen principle as required, proper drainageof water to make it watertight including checking of all the structural andfunctional design. (b) Providing, fabricating and supplying and fixing panels of aluminiumcomposite panel cladding in pan shape in metalic colour of approvedshades made out of 4 mm thick aluminium composite panel materialconsisting of 3 mm thick FR grade mineral core sandwiched betweentwo Aluminium sheets (each 0.5 mm thick). The aluminium compositepanel cladding sheet shall be coil coated, with Kynar 500 based PVDF /Lumiflon based fluoropolymer resin coating of approved colour and shadeon face # 1 and polymer (Service) coating on face # 2 as specified usingstainless steel screws, nuts, bolts, washers, cleats, weather siliconesealant, backer rods etc. c) The fastening brackets of Aluminium alloy 6005 T5 / MS with HotDip Galvanised with serrations and serrated washers to arrest the windload movement, fasteners, SS 316 Pins and anchor bolts of approvedmake in SS 316, Nylon separators to prevent bi-metallic contacts allcomplete required to perform as per specification and drawing The itemincludes cost of all material & labour component, the cost of all mockups at site, cost of all samples of the individual components for testingin an approved laboratory, field tests on the assembled working curtainwall with aluminium composite panel cladding, cleaning and protection ofthe curtain wall with aluminium composite panel cladding till the handingover of the building for occupation. Base frame work for ACP claddingis payable under the relevant aluminium items. The Contractor shallprovide curtain wall with aluminium composite panel cladding, havingall the performance characteristics all complete , as per the Architecturaldrawings, as per item description, as specified, as per the approved shopdrawings and as directed by the Engineer-in-Charge. However, for thepurpose of payment, only the actual area on the external face of thecurtain wall with Aluminum Composite Panel Cladding (including width ofgroove) shall be measured in sqm. up to two decimal places. |
| 23 | BOQ MARKET ITEMS (QUOTATION RATE) 30.5m FLAG POST WITH FLAG Providing and Fixing 230.5 MTR Flag Mast Pole (GI with PU Painted)Top Dia:-150mm Bottom:-540mm, Thickness:-5-4-3mm, Base Plate-740*740*30mm, F. Bolts:-12Nos (30x1000mm), TemplateIncluding Accessories:- Including Accessories:-Head Frame, Pulley, SS Wire Rope, Winch Str,Belt with Pully, Motor-1 HP, with aviation light |
| 24 | Topiary Pergola Walkway Size : 8 ft x 12 ft Fabrication and Installation of Topiary Pergola Arches with Provision for placing 9 inch pots along the arch made in MS rod 5mm – 12mm, MS Angle 25x5 and 30x5 , primer and Oil Paint (Mint Green) Horticulture Cost Separate |
| 25 | Selfie kiosk Size : 1.5 m x 2.4 m Fabrication and Installation of Selfie Kiosk 2400 mm height x 1500mm width x 300mm thickness made in ACP with MS Framework and supporting base plate and fasteners complete with approved ACP Texture and MS Paint Finish as per the engineer -in-site |
| 26 | MULIPLAY STATION CHILDREN PARK MULTIPLAY SYSTEM TRPS-13Size : 30 X 26 X 15 ft• Pipe : Structure pipe made of PrakashBrand B class conforming to IS 1239 latestpipe 4” 42 OD and 32 OD of 2 to 3 mmthickness.• Material of stair , railing ,bridge :structure made of 32 OD AND 25 mm pipeof 2 to 3 mm thickness. (B class conformingto IS 1239 latest) PU coated with the layerof thickness of 70 to 80 microns• plastic part : LLDPE (roto platic) of 6 mmthickness with UV 6 resistance.• pole Cap – made of HDPE• Paint – powder coated ( 80 to 90 micron).For children of age group of 3 to 12 years |
| 27 | EPDM Walkway Size : At least 2M wide Fabrication and Installation of EPDM Track with 19mm Base + 6mm EPDM |
| 28 | Animal Topiary Elephant : 12 feet height, Tiger : 8 feet length, Deer : 6 feet height,Deer : 6 feet height Fabrication and Installation of Topiary frames for animals made in MS rod 5mm – 12mm, MS Angle 25x5 and 30x5 , primer and Oil Paint (Mint Green) Horticulture Cost Separate |
| 29 | BADMINTON COURT Providing and lying Acrylic Badminton Court Flooring , Floor Thickness: 5 mm MS White Movable Badminton Pole Pair Nylon Sports Badminton Net 4 Seater Stainless Steel Bench |
| 30 | CRICKET PLAY AREA Nylon NFSportech Rectangle Cricket Net 2.5mm, For Indoor And Outdoor Practice, Interlocked Nylon Movable Cricket Net practice Cage |
| 31 | BOQ GEM ITEMS (GEM/INDIA MART) Providing and fixing outdoor STEEL GARDEN BENCH CAPACITY 3 SEATER |
| 32 | Providing and fixing outdoor PLASTIC DUSTBINS |
| 33 | Providing and fixing outdoor FOUNTAINS WITH LIGHTS (INSTALLATION COST OF FOUNTAINS WILL HAVE BEAR BY VENDOR ITSELF, SO KINDLY GIVE RATES ACC. TO THAT ) |
| 34 | Providing and fixing INDOOR GYM EQUIPMNETS CABLE CROSS |
| 35 | Providing and fixing INDOOR GYM EQUIPMNETS LEG PRESS |
| 36 | Providing and fixing INDOOR GYM EQUIPMNETS SMITH MACHINE |
| 37 | Providing and fixing INDOOR GYM EQUIPMNETS STAT BIKE |
| 38 | Providing and fixing INDOOR GYM EQUIPMNETS treadmils |
| 39 | Providing and fixing INDOOR GYM EQUIPMNETS DUMBBELL SET OF VARIOUS SIZES |
| 40 | Providing and fixing SOLAR BOLLARDS |
| 41 | Providing YOGA MATS Please Enable Macros to View BoQ information |
