|
| 1 | CI Foot Valve2\\" with Nipple |
| 2 | Gun Metal Gate valve 3/4\\" Dia, Heavy duty, water working pressure 200 Psi both side inner threaded. Make-Leader /L &T/ KSB |
| 3 | Flexible Rubber armoured Hose pipe 2\\" |
| 4 | Single phase mono block pump 2.00 HP, Make- Crompton Greaves/Kirloskar |
| 5 | Single Phase Starter for 2 HP Pump Make- L& T/Crompton Greaves |
| 6 | Limit Switch for TGB as per sample. |
| 7 | Safety Shoes , Man Size ( As per Required), Make- Allen Couper/Bata |
| 8 | Dangri for man of good quality cloth |
| 9 | Towel, Make- Bombay Deying / Raymond’s |
| 10 | Synthetic Rubber Hose Pipe, Oil proof heat resistant with nylon thread, conforming to IS 7654/87 Type 2,Working Pressure: 10 Kg per Sq cm, ID: 20 mm, OD: 32mm, Length: 20 Mtr, Make: Jyoti/Indo/Vardhman |
| 11 | Ball Bearing No. 6313, Make: SKF/NBC/FAG |
| 12 | LED Indication Lamp, Universal Type,24 Volt (Red+ Yellow+ Green) |
| 13 | ECIL make Servo Potentiometer continuous, wire wound Type 3.5 cs |
| 14 | Rechargeable 5W Led torch 3.7V, 3000mAh |
| 15 | Brass Float for TGB dia. 90 mm, h-150 mm as per sample |
| 16 | Filler gauge 600 mm long |
| 17 | Filler gauge 150 mm long |
| 18 | Exhaust fan , Single phase, Having 300 mm dia., RPM- 1400, Make: Crompton Greaves or equivalent |
| 19 | Extension board suitable for 16 Amp, 240 V |
| 20 | Proximity sensor for MIV open close indication |
| 21 | PVC insulated copper Cable (sheathed) ,2 core ,size 1.5 mm²,1100 volts, as per IS: 694 ,(91.44 meter. roll ) |
| 22 | H.P. Jointing sheet thickness 2 mm, width 1350 mm, H.Compo/Champion make |
| 23 | H.P. Jointing sheet thickness 3 mm, width 1350 mm, H.Compo/Champion make |
| 24 | Pressure gauge 0-10 Kg/cm², dial size: 150 mm, Panel Mounting, threaded 3/8” BSP, Make- Baumer/ Stico/Wika |
| 25 | Pressure gauge 0-21 Kg/cm², dial size 150 mm, Panel mounting, threaded 3/8” BSP, Make-Baumer/Stico/Wika |
| 26 | Pressure gauge 0-40 |
| 27 | SS Shim thickness 0.05mm, Width 14\\" BIS Standard |
| 28 | SS Shim thickness 0.06mm, Width 14\\" BIS Standard |
| 29 | SS Shim thickness 0.07mm, Width 14\\" BIS Standard |
| 30 | SS Shim thickness 0.08mm, Width 14\\" BIS Standard |
| 31 | SS Shim thickness 0.10mm, Width 14\\" BIS Standard |
| 32 | PVC Flexible corrugated Pipe dia., 2\\". BIS Standard |
| 33 | PVC Flexible corrugated Pipe dia., 1½\\", L-30 Meter BIS Standard |
| 34 | Switching Valve, HED 80A, Make Rexroth or other equivalent as per sample |
| 35 | Solenoid Coil, 220 Volt D.C, 30 Watt, I D-23 mm, Height -50mm , Make- Rexroth or other equivalent as per sample |
| 36 | Solenoid Coil R901267189 220 Volt DC , 42 Watt, , Make- Rexroth or other equivalent as per sample |
| 37 | Roller Bearing No. NU 314, Make SKF/NBC/FAG |
| 38 | Pressure Switch for Type KPS 39,Make- Danfoss or other equivalent as per sample |
| 39 | Rain coat |
| 40 | Stud, size: 5/8” x 125 mm long, BSF threaded 32 mm & 22 mm, Material EN-56C as per sample. |
| 41 | Hex Head Bolt size: 3/4” BSF x 114 mm long, half threaded, Material EN-56C as per sample. |
| 42 | Hex Head Bolt size: 5/8” BSF x 152.4 mm long, half threaded, Material EN-56C as per sample |
| 43 | Plain Washer, Size: 5/8”, thickness 2 mm, ID- 18 mm, OD-40 mm as per sample |
| 44 | Hex Head Brass Bolt 1” BSF x 76 mm long with Brass Nut as per sample |
| 45 | S.S Stud 5/8”BSFx 160 mm long with 2 No. Hex Nut & 2 No. washer as per sample |
| 46 | Mechanical Seal for pump Model: T3S 80/54 NTS XF S2 RNJ IBALX. Make- Tushaco as per sample |
| 47 | Double Ended MS Studs M 24- 2.5 as per sample |
| 48 | Wire Wound High Pressure Jointing sheet for oil line. Thickness- 3 mm, Width- 1350 mm. Make - Champion/ H. Compo |
| 49 | Wire Wound High Pressure Jointing sheet for oil line. Thickness- 4 mm, Width- 1350 mm. Make - Champion/ H. Compo |
| 50 | M- Seal Phataphat 1 Kg Pack |
| 51 | 7/8” BSF 76 mm Long SS STUD as per sample |
| 52 | 7/8” Brass nut as per sample |
| 53 | 7/8” BSF 4” Long socket head cap bolt as per sample |
| 54 | 7/8” spring washer as per sample |
| 55 | 1.1/4” BSF X 4” Long hex head bolt as per sample |
| 56 | Hex Head Bolt size 1 1/2” BSF x 135 long A/F=60mm , to be forged by Material EN24T as per sample |
| 57 | Single phase portable welding machine |
| 58 | Fevitite epoxy compound 180 gm pack |
| 59 | Gland Sealing Segment Set for 60 MW M/C made of ferobestos sheet as per sample |
| 60 | Bearing 6310 SKF/ TATA make |
| 61 | C.I. Foot valve 2’’ with nipple as per sample Slot, up to 128 GB, IR Range 30 meters, IP 66 & POE, (2 Megapixel IR Night Vision Bullet Camera) Please Enable Macros to View BoQ information |
