|
| 1 | Demolition Above G.L. upto two floor to level including disposal of unserviceable material with in 20 mtrs lead un-reinforced cement concrete more than 15 cm thickness complete in all respect. |
| 2 | Extraction of silt and other material like boulders etc. from width and depth etc. i/c dewatering ,pumping ,soaring and despose off the excavated silt complete in all respect in all leads and lifts as per direction of the Engineer in charge. |
| 3 | Percolation well at WTP Nadaun Town Old |
| 4 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centering,shuttering,strutting and propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for insitu-reinforced concrete and plain. |
| 5 | Vertical surfaces such as walls(any thickness) partitions and the like including attached pillasters,buttresses,plinth and string courses and the like complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-Charge. |
| 6 | Providing & laying no fine concrete 1:3 ( 1cement :3 stone aggregate) complete in all respect) |
| 7 | Providing and laying cement concrete work 1:2:4(1cement:2sand: 4 graded stone aggregate 20mm nominal size ) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:- |
| 8 | In column , pillar posts and struts in all leads and lifts. |
| 9 | Suspended floors, roofs, landings and shelves and their supports, balconies, beams ,griders bressumers and cantilevers upto all floor level. |
| 10 | Providing, Laying mild or tor steel reinforcement for RCC. Work including bending binding and placing in position complete upto floor two level Tor steel in all leads and lifts. |
| 11 | Brick work using common burnt clay building bricks in foundation and plinth in cement mortar 1:4(1 Cement:4 sand) including carriage of materials and curing complete in all leads and lifts.(2nd class) |
| 12 | 20mm Cement plaster in single coat on rough side of brick/stone masonry forinterior plastering upto floor two level includingarrises,internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. |
| 13 | Providing and fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25mm thickness including hinges jumb lock jamb,beed and if reuired angle threshold of mild steel angle of section 50X25 mm or base ties of 1.25 mm pressed mild steel welded or regidly fixed together by mechanical means,adjustable lugs with split and tails to each jamb including steel butt hinges 2.5 mm thick with guards,lock strike plate and shock absorber as specified and applying a coat of approved steel primer after pretretment of the surface as directed by Engineer-in-Charge. |
| 14 | Steel work welded in built up sections, trusses, and framed work including cutting ,hoisting, fixing in position and applying a priming coat of red lead paint in grating, framed guards bars, Ladders, railings, brackets and similar works as per direction and to the entire satisfaction of the Engineer-in-charge. Please Enable Macros to View BoQ information |
