|
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 1 meter from cutting edge: In all kinds of soils |
| 2 | Ordinary rock |
| 3 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. In all kinds of soils. |
| 4 | Ordinary rock. |
| 5 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: In all kinds of soils |
| 6 | Ordinary rock |
| 7 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 8 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 9 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix). |
| 10 | Demolishing RCC work manually/mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-incharge |
| 11 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 12 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) |
| 13 | 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 14 | 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) |
| 15 | 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 16 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 17 | 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 18 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 19 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 20 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 21 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 22 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level:Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 23 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate. |
| 24 | Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement) |
| 25 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 26 | Centering and shuttering including strutting, propping etc, and removal of form for. Foundations, footings, bases of columns etc for mass concrete. |
| 27 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 28 | Columns, pillars, piers, abutments, posts and struts. |
| 29 | Suspended floors, roofs, landings, balconies and access platforms. |
| 30 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 31 | Stairs (excluding landings) except spiral staircases. |
| 32 | Edges of slabs and breaks in floors and walls under 20cm wide |
| 33 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) nallah |
| 34 | Dry random rubble masonry with hard stone in foundation and plinth: With bond stone. (Nallah) |
| 35 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail |
| 36 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete First class Budloo/Fir wood |
| 37 | Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. With 2nd class teak wood beading 62x19 mm |
| 38 | Providing and fixing specified board medium density exterior grade (Grade I) to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : Flat pressed 3 layer particle board or graded wood particle board IS:3087 18 mm |
| 39 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class Kail wood |
| 40 | Providing and fixing cupboard shutters 25mm thick, with pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked exterior grade (Grade I Type II) having one side decorative lamination and other side a balancing lamination including second class teak wood lipping of 25mm widex12mm thick with necessary screws and bright finished stainless steel piano hinges complete as per directions of Engineer- in-charge |
| 41 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-inchargeInternal work-exposed on wall with clamps at 1.00 meter spacing. PN-16 pipe, 16mm OD(SDR-7.4) |
| 42 | PN-16 pipe , 20mm OD(SDR-7.4) |
| 43 | PN-16 pipe , 25mm OD(SDR-7.4) |
| 44 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 45 | PN-16 pipe , 40mm OD(SDR-7.4) |
| 46 | PN-10 pipe , 50mm OD(SDR-11) |
| 47 | Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe, 16mm OD(SDR-7.4) |
| 48 | PN-16 pipe , 20mm OD(SDR-7.4) |
| 49 | PN-16 pipe , 25mm OD(SDR-7.4) |
| 50 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 51 | External work including trenching, refilling etc. PN-16 pipe, 16mm OD(SDR-7.4) |
| 52 | PN-16 pipe , 20mm OD(SDR-7.4) |
| 53 | PN-16 pipe , 25mm OD(SDR-7.4) |
| 54 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 55 | PN-16 pipe , 40mm OD(SDR-7.4) |
| 56 | PN-10 pipe , 50mm OD(SDR-11) |
| 57 | PN-10 pipe , 63mm OD(SDR-11) |
| 58 | PN-10 pipe , 75mm OD(SDR-11) |
| 59 | PN-10 pipe , 90mm OD(SDR-11) |
| 60 | Providing and fixing PPR Unions. PPR Union 20mm |
| 61 | PPR Union 25mm |
| 62 | PPR Union 32mm |
| 63 | PPR Union 40mm |
| 64 | PPR Union 50mm |
| 65 | PPR Union 63mm |
| 66 | PPR Union 75mm |
| 67 | Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. 100 mm and 150 mm dia GI pipes |
| 68 | 65 mm and 80 mm dia GI pipes |
| 69 | 40 mm and 50 mm dia GI pipes |
| 70 | 25 mm and 32 mm dia GI pipes |
| 71 | 15 mm and 20 mm dia GI pipes |
| 72 | Providing and fixing of G.I pipes complete with GI fittings excl.tranches and refilling etc.(external) light.15mm dia GI. |
| 73 | 20mm dia GI |
| 74 | 25mm dia GI |
| 75 | 40mm dia GI |
| 76 | 50mm dia GI |
| 77 | 65mm dia GI |
| 78 | 80mm dia GI |
| 79 | 100mm dia GI |
| 80 | Dismantling G.I/DI. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge: Above 40 mm nominal bore |
| 81 | 15 - 40 mm nominal bore |
| 82 | 80-100mm dia D.I pipes |
| 83 | Above 100mm dia D.I pipes |
| 84 | Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe) |
| 85 | Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket. 100 mm dia pipes |
| 86 | 125 mm dia pipes |
| 87 | 150 mm dia pipes |
| 88 | 200 mm dia pipes |
| 89 | 250 mm dia pipes |
| 90 | 300 mm dia pipes |
| 91 | Dismantling of spindle / rod and check nuts of flanged type sluice valves by way of manufacturing of new spindle / rod made out of mild steel & new check nut made out of gun metal material. The job includes dismantling of sluice valve reassembling after fixing of spindle & check nut duly manufactures and threaded in workshop including cost of welding, packing, carriage to & fro upto the workshop and back to site of work (Complete job) from 100 mm dia sluice valve upto 300 mm dia sluice valve including cost of salvaged material. |
| 92 | Fixing of GI double collers/ arresting of leakages by way of welding including all sorts of carriages incl. cutting of available G.I pipes as per site requirement. 80 mm dia |
| 93 | 100 mm dia |
| 94 | 150 mm dia |
| 95 | 200 mm dia |
| 96 | Providing / fixing of double collers, G.I./ M.S. for arresting of leakages by using led & spun yarn incld. earthwork excavation, refilling etc. including all sorts of carriages (length verying from 0.60 to 1 Mtr.). 40 mm dia |
| 97 | 50 mm dia |
| 98 | 65 mm dia |
| 99 | 80 mm dia |
| 100 | 100 mm dia |
| 101 | 150 mm dia |
| 102 | 200 mm dia |
| 103 | Re-threading of damaged pipe ends including carriage from site to workshop and back. 20 mm dia |
| 104 | 25 mm dia |
| 105 | 40 mm dia |
| 106 | 50 mm dia |
| 107 | 65 mm dia |
| 108 | 80 mm dia |
| 109 | 100 mm dia |
| 110 | P/F of new nuts, bolts incl. replacement of old ones and all sorts of carriages complete. |
| 111 | P/F of washers/rubber insertions of different dias incl. all sorts of carriages complete.200/150/100/80/65/50mm dia. |
| 112 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete. 25 to 40mm Nominal Bore |
| 113 | 50 to 80mm Nominal Bore |
| 114 | Replacement /Providing/fixing of PVC gate valves for bleaching / alum tanks/ Foot valves and PVC pipes of ISI marked standard make incl cost of all fittings required and carriage complete. 20 mm dia Gate valve |
| 115 | 25 mm dia Gate valve |
| 116 | 32 mm dia Gate valve |
| 117 | 40 mm dia Gate valve |
| 118 | 50 mm dia Gate valve |
| 119 | 20 mm dia PVC pipe (B-class) |
| 120 | 25 mm dia PVC pipe (B-class) |
| 121 | 32 mm dia PVC pipe (B-class) |
| 122 | 40 mm dia PVC pipe (B-class) |
| 123 | 50 mm dia PVC pipe (B-class) |
| 124 | Replacement of old damaged G.I. Gate valves by way of new Gate valves of reputed make including cost of nuts, bolts, rubber insulations of ISI marked standard make incl. all carriages upto site of works, complete. (The unserviceable material shall be returned to Div. store under proper R.I). 100mm dia Gate valve. |
| 125 | 80 mm dia Gate valve |
| 126 | 65 mm dia Gate valve |
| 127 | 50 mm dia Gate valve |
| 128 | 40 mm dia Gate valve |
| 129 | 25 mm dia Gate valve |
| 130 | 20 mm dia Gate valve |
| 131 | Providing and fixing D.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc.incl. all sorts of carriages involved complete. (the tail pieces if required will be paid separately). Confirming to IS:14846 read with latest amendments.80 mm dia.Class 1 |
| 132 | 100 mm dia. Class 1 |
| 133 | 125 mm dia. Class 1 |
| 134 | 150 mm dia. Class 1 |
| 135 | 200 mm dia. Class 1 |
| 136 | 250 mm dia. Class 1 |
| 137 | Fixing charges of Sluice Valves including Testing, Commissioning and carriages from divisional store to actual site of work, Complete job.200mm dia. |
| 138 | 150 mm dia |
| 139 | 100mm dia |
| 140 | 80mm dia |
| 141 | 50mm dia |
| 142 | Welding, including transportation of plant at site etc. complete .By gas plant. |
| 143 | By electric plant |
| 144 | Providing fixing & commissioning of 10/12 mm thick Flanges in pairs including welding, cutting of threaded portion, washers including cost of Flanges with Nuts and Bolts including making joint leak proof including all sorts of labours whatsoever required.200mm dia. |
| 145 | 150mm dia |
| 146 | 100mm dia |
| 147 | 80mm dia |
| 148 | 65mm dia |
| 149 | 50mm dia |
| 150 | Restoration of damaged pipes due to frost / frozen including earth works excavation /dismantling /refilling / making good the same complete job in all respects. Upto 20mm to 100mm dia (by using blue lamp including cost of K.oil) |
| 151 | Providing and fixing of Nitrile 25mm thick with Brown Tapping Rock wool 50mm thick and thermos foam of 36 mm thick with full black tapping and also cover with aluminium sheet 28 gauge for exposed distributer supply main/FHTC line wherever required as per the directions of E.I.C Incl.all carriage leads and lifts complete job. |
| 152 | P/F of Air Releasing Valves (single acting) including cutting of bore hole , welding of the pedestal rod and providing laying of cement concrete 1:3:6 mix with shuttering box PGI 9”X9”x12” around the pedestal rod with all carriages and head load upto actual site of work.25mm dia Air Valve. |
| 153 | 20mm dia Air Valve |
| 154 | Laying & fixing of HDPE Pipes complete excluding earth work, but including all carriages upto site of work.25mm dia. |
| 155 | 32mm dia |
| 156 | 40mm dia |
| 157 | 50mm dia |
| 158 | 63mm dia |
| 159 | 75mm dia |
| 160 | Supplying of PE-100, PN-12.5 HDPE Pipes in standard lengths confirming to 1S:4984/14151/12786/13488 with necessary jointing material and all kinds of pipe specials including Transportation Freight charges, Inspection charges, Loading, Un-Loading charges, Conveying to departmental store, Joining procedure as per relevant IS code complete with materials for jointing procedure with al labours as directed by Engineer in Charge as per IS 7634 Part-ll, Hydraulic testing to specified pressures (including cost of all materials Labour and Water) for specified lengths inclusive of al kinds of taxes and carriage complete.25mm dia. |
| 161 | 32mm dia |
| 162 | 40mm dia |
| 163 | 50mm dia |
| 164 | 63mm dia |
| 165 | 75mm dia |
| 166 | Fabrication Providing and fixing including testing, commissioning at site M.S pipe Specials viz tees, bends ,sockets,step collars etc made out of 6 mm thick M.S sheet including cost of Nuts, Bolts, washers etc & all sorts of carriages upto site of work, as per requirement at site complete job.(the item is to be paid in fitted and finished form) as per ground profile using welding job including cutting of pipes, fixing of flunges, nuts, bolts, washers etc for Washout system. The job includes cost of M.S pipe, flanges, nuts , bolts glands, R.I cloth complete job |
| 167 | Providing and fixing of pipe specials of approved make manufacture including cutting and threading the pipe and making long screws etc incl. all sorts of carriages involved complete. if not available in the Divisional stores of ISI marked standard make. 100mm dia G.I Union |
| 168 | 80 mm dia G.I. Union |
| 169 | 65 mm dia G.I. Union |
| 170 | 50 mm dia G.I. Union |
| 171 | 40 mm dia G.I. Union |
| 172 | 25 mm dia G.I. Union |
| 173 | 20 mm dia G.I. Union |
| 174 | 15 mm dia G.I. Union |
| 175 | 100 mm dia G.I. Elbow |
| 176 | 80 mm dia G.I. Elbow |
| 177 | 65 mm dia G.I. Elbow |
| 178 | 50 mm dia G.I. Elbow |
| 179 | 40 mm dia G.I. Elbow |
| 180 | 25 mm dia G.I. Elbow |
| 181 | 20 mm dia G.I. Elbow |
| 182 | 15 mm dia G.I. Elbow |
| 183 | 80 mm dia G.I. Nipple 6\\" |
| 184 | 65 mm dia G.I. Nipple 6\\" |
| 185 | 50 mm dia G.I. Nipple 6\\" |
| 186 | 40 mm dia G.I. Nipple 6\\" |
| 187 | 25 mm dia G.I. Nipple 6\\" |
| 188 | 20 mm dia G.I. Nipple 6\\" |
| 189 | 15 mm dia G.I. Nipple 6\\" |
| 190 | 100 mm dia G.I. equal Tee |
| 191 | 80 mm dia G.I. equal Tee |
| 192 | 65 mm dia G.I. equal Tee |
| 193 | 50 mm dia G.I. equal tee |
| 194 | 40 mm dia G.I. equal tee |
| 195 | 25 mm dia G.I. equal tee |
| 196 | 20 mm dia G.I. equal tee |
| 197 | 15 mm dia G.I. equal tee |
| 198 | 20x20x15 mm dia G.I. Tee |
| 199 | 25x25x20 mm dia G.I. Tee |
| 200 | 40x40x25 mm dia G.I. Tee |
| 201 | 50x50x40 mm dia G.I. Tee |
| 202 | 65x65x50 mm dia G.I. Tee |
| 203 | 80x80x65 mm dia G.I. Tee |
| 204 | 20x15 mm dia Socket/ Reducer |
| 205 | 25x20 mm dia Socket/ Reducer |
| 206 | 40x25 mm dia Socket/ Reducer |
| 207 | 50x40 mm dia Socket/ Reducer |
| 208 | 65x50 mm dia Socket/ Reducer |
| 209 | 80x65 mm dia Socket/ Reducer |
| 210 | 20x15 mm dia Elbow/ Reducer |
| 211 | 25x20 mm dia Elbow/ Reducer |
| 212 | 40x25 mm dia Elbow/ Reducer |
| 213 | 50x40 mm dia Elbow/ Reducer |
| 214 | 65x50 mm dia Elbow/ Reducer |
| 215 | 80x65 mm dia Elbow/ Reducer |
| 216 | Supply of Kerosene at site including all sorts of carriage |
| 217 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 218 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 219 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 220 | Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately). 50 mm dia |
| 221 | 80 mm dia. |
| 222 | Providing and laying D.I. Specials of Class K-12 suitable for push-on jointing as per IS : 9523. Upto 600 mm dia. |
| 223 | Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 meters. Upto 150 mm diameter. |
| 224 | Above 150 mm diameter. |
| 225 | P/F of PPR pipe, including all pipe fitting, carriages upto Site of work complete in all respects. 25 mm |
| 226 | 32 mm |
| 227 | Providing of PPR Gate valves/ Ball valves including all necessary accessories as per requirement at site complete.25mm Gate valve/Ball valve |
| 228 | 32 mm Gate Valve/ Ball valve |
| 229 | 40 mm Gate valve/ Ball valve |
| 230 | Supply Laying and filling of filter media from approved source Ganderbal - Gravel (Graded gravel - size ranging from 2.0mm to 40.00 mm) in filter beds. Including all carriages, by Mechanical transport / head load what so ever involved upto site of work as directed by Engineer-in-charge complete job. |
| 231 | Supply Laying and filling of filter media from approved source Ganderbal- Sand (Coarse filter sand - in filter beds. Including all carriages, by Mechanical transport / head load what so ever involved upto site of work as directed by Engineer-in-charge complete job. |
| 232 | Removing, washing of old filter media including washing of filter beds and laying of same in position complete job. |
| 233 | Providing of plastic buckets with Mug including Brooms and Wippers etc of good quality at various sites complete as per the requirement. |
| 234 | Providing and fixing basin mixer of approved quality. |
| 235 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. 15 mm nominal dia |
| 236 | Providing and fixing CP Brass tapes of quality & make as approved by Engineer in charge. 15 mm nominal dia |
| 237 | Providing and fixing P.V.C low level flushing cistern with manually18.0 (Sanitary Installation) 240 CODE NO. DESCRIPTION UNIT RATE ₹ controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 litre capcity –white |
| 238 | P/F of stainless steel mesh with 2,50 to 3.50mm thick mesh fixed in angle iron frame 45x45x6mm complete in all respects to cover varios SSFP'S, gratings, at head sites etc as per requirement. |
| 239 | Providing of blue lamps including all sorts of carriages complete. 1 ltr capacity |
| 240 | 0.75 ltr capacity |
| 241 | Providing/ fixing of Rubber Gaskets .80 mm dia |
| 242 | 100 mm dia |
| 243 | 150 mm dia |
| 244 | 200 mm dia |
| 245 | 250 mm dia |
| 246 | Providing/ fixing of Rubber Washers. 80 mm dia |
| 247 | 100 mm dia |
| 248 | 150 mm dia |
| 249 | 200 mm dia |
| 250 | 250 mm dia |
| 251 | Providing refreshment to supervisory staff of the for restoration of water during night /day or the partcipants of the Indenpadnace Day , Republic day or other official Functions complette job including packing at venue with following Menu, incluidng serving charges/ carry bags . Water Bottle One litre |
| 252 | Water Bottle 500 ml |
| 253 | Water bollte 250 ml |
| 254 | Juice pac/ tin 100 ml to 180 ml of Standard Quality |
| 255 | Boiled Egg |
| 256 | Biscuit standard Quality of 50 g |
| 257 | Dal 50 g Pac |
| 258 | Banana |
| 259 | Butter Toastes each pair |
| 260 | Toastes without Butter each pair |
| 261 | Tea Sugar each Cup |
| 262 | Tea Namkeen each Cup |
| 263 | Normal Chicken/Mutton Biryani one plate for person |
| 264 | Rice Plate with Dal , vegetables & curd for each person |
| 265 | Rice Plate with vegetables, Single piece meat & curd for each person |
| 266 | Hire charges of water dispensor incl. all sorts of carriages involved to & fro. |
| 267 | Supplying of 20 ltr water bottle for dispenser |
| 268 | Preparation and making arrangements of Zaffron, Kehwa with Shrmal ready to serve with all crockery items like cups, spoons and plates etc of Superior quality free from cracks etc incl, supplying of medium size Shirmal of good quality to be obtained from Standard baker complete. |
| 269 | Supplying and serving of Fresh Mixed Dry Fruit incl. serving in bowls and hire charges of the same. |
| 270 | Supply and fixing of Banners of required sizes with required letter writing as directed size (3’x6’) complete |
| 271 | Hire Charges Of loudSpeakers for necessary announcements |
| 272 | Providing necessary complete personnel protective clothing kit including Jackets and shoes to the PHE Staff during severe conditions. Jackets With PHE Tagging |
| 273 | Long Shoes for under water works |
| 274 | Helmets / Gloves |
| 275 | Water Proof rain Coats |
| 276 | Supplying & fixing as per site requirement of Nylon rope on 10 mm dia of Standartd make including all carriages comp job |
| 277 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 278 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 279 | White washing with lime to give an even shade on Old Work (two or more coats) |
| 280 | Colour washing such as green blue or buff to give an even shade. New work (two or more coats) with a basecoat of white washing with lime. |
| 281 | New work (two or more coats) with basecoat of whiting |
| 282 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 283 | Distempering with 1st quality acrylic distemper (ready mixed)having VOC content less than 50 gms/litre, two or more coats on new work of approved manufacturer, of required shade and colour complete as per manufacturer’s specifications |
| 284 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 285 | Finishing walls with water proofing cement paint of required shade: Old work (one or more coats applied @ 2.20 kg/10sqm) over priming coat of primer applied @ 0.80 liters/10sqm complete including cost of priming coat. |
| 286 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 287 | Applying priming coat: With ready mixed aluminum primer of approved brand and manufacture on resinous wood and ply wood |
| 288 | Applying priming coat: With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works |
| 289 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 290 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 291 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete. On steel work |
| 292 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete. On concrete work |
| 293 | Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 294 | With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ liter |
| 295 | With ready mixed red oxide zinc chromatic on steel / iron works having VOC content less than 250 grams/ liter |
| 296 | Providing and Fixing of M.C.C.B.of ISI marked standard make the job includes dismantling of damaged/non functional Amp. M.C.C.B. and fixing of new one including all sorts carriage from source to workshop including carriages of salvaged material from filtration plant upto Divisional Stores including testing, installing and commissioning complete job. 03 Pole 200 Amp. |
| 297 | 03 Pole 100 Amp. |
| 298 | 04 Pole 100 Amp. |
| 299 | 02 Pole 32 Amp. |
| 300 | 03 Pole 32 Amp. |
| 301 | 04 Pole 32 Amp. |
| 302 | 63 Amp 04 pole change over |
| 303 | Providing and laying of armoured cable 95mm, 3.5 core for main service line of reputed make in P.V.C pipes of required dia to accommodate the service line including bends etc. including copper thimbles, earth work excavation and filling for laying of cable complete. |
| 304 | Providing and fixing of Electrical points (heating and lighting) incld. cost of wire switches, necessary MCB’s switch boards, ceiling roses reputed make ISI mark screws, casing / conduit materials of allsorts of carriage and labour charges required for the job. Providing and carrying out wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Including cost of conduit) |
| 305 | Providing and carrying out wiring for heating points with 4.0 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, modular combined S&S 16Amp along with modular plate, suitable GI box and earthing the point with 2 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (incl. cost of conduit) |
| 306 | Providing fixing & commissioning of LED Flood Lights of 50 Watts with stand including all accessories required at site complete job inclusive all carriages. |
| 307 | Overhauling voltage stabilizers installed at site. The job includes pouring / filling of transformer oil of required specified gravity, replacement of driven rotars (automatic), replacement of voltage meters, Amp meters, indicators, thimbles etc. complete job, making the unit complete functional for bearing of required load. The job also includes labour charges, cost of wiring, pin sockets and all sorts of carriages from site of work upto the workshop & back to actual site of work incld. installation at site & testing, successful commissioning complete job. 5 KV to 10 KV |
| 308 | 11 KV to 20 KV |
| 309 | 21 KV to 30 KV |
| 310 | Desilting of various structures by way of removal of wet, silt, mulba etc from SR's, PST's, Intake chambers, Intake Channels, and other structures incld. Disposal of desilted material from site premises with all carriages lead & lifts etc. The job also includes, washing and cleaning of walls, beds, drains and floor etc with bleaching powder solution complete job. Using buckets, ropes etc. Manually |
| 311 | Through washout by Mix silt with water |
| 312 | Clearing snow (without frost) from roads manually. Snow depth upto 150 mm |
| 313 | Snow depth over 150 mm but upto 250mm |
| 314 | Snow depth over 250 mm but upto 350mm |
| 315 | Snow depth over 350 mm but upto 450mm |
| 316 | Snow depth over 450 mm but upto 550mm |
| 317 | Snow depth over 550 mm but upto 650mm |
| 318 | Snow depth over 650 mm but upto 750mm |
| 319 | Snow depth over 750 mm but upto 850mm |
| 320 | Snow depth over 850 mm but upto 950mm |
| 321 | Snow depth over 950 mm but upto 1050mm |
| 322 | Snow depth over 1050 mm but upto 1150 mm |
| 323 | Snow depth over 1150 mm but upto 1250 mm |
| 324 | Clearing snow (with frost) from roads, manually using picks and shovels; snow depth upto 150 mm |
| 325 | Clearing snow avalanche mixed with frost and compressed snow, including all types of equipments and safety to the workers while clearing the avalanches at head site |
| 326 | Supply of fire wood / rejection wood incld. all carriages upto site of work, complete |
| 327 | Providing/spreading of salt to be used during frost days incl. all carriages complete. |
| 328 | Renewing glass panes and re-fixing existing wooden fillets: Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) |
| 329 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 330 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 331 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete. |
| 332 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 333 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube |
| 334 | E.R.W. tubes |
| 335 | G.I. pipes |
| 336 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 337 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 338 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : G.S. Sheet |
| 339 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia 4 mm |
| 340 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters: 80x1.25 mm M.S. laths with 1.25 mm thick top cover. |
| 341 | 80x1.20 mm M.S. laths with 1.20 mm thick top cover |
| 342 | 80x0.90 mm M.S. laths with 0.90 mm thick top cov |
| 343 | Providing and fixing ball bearing for rolling shutters. |
| 344 | Providing and fixing 1st quality ceramic glazed floor/ wall tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 345 | In colour such as White, Ivory, Grey, Fume Red Brown |
| 346 | In all colours, shades, except White, Ivory, Fume Red Brown |
| 347 | 12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 3 ( 1 cement : 3 fine sand) |
| 348 | 1 : 4 ( 1 cement : 4 fine sand) |
| 349 | Providing and Laying of Stone Soling Hand Packed and compacted manually including all carriages complete |
| 350 | Good Earth |
| 351 | Supply and fixing of Inaugration stone with custom carved letters complete including Making of Foundation made out of Brick work including 15mm thick Plater in 1:4 Mix including all sorts of carriages wherever required |
| 352 | Providing and fixing of printed PVC type flex banners as per requirement complete job. Without the supporting frame of steel rolled hollow Sq. bars |
| 353 | With the supporting frame of steel rolled hollow Sq. bars |
| 354 | With the supporting frame of steel rolled hollow Sq. bars and cardboard backing |
| 355 | Supply of unskilled labours |
| 356 | Supply of skilled labour |
| 357 | Supply of Carpenter 2nd class |
| 358 | Supply of Mason 2nd class |
| 359 | Providing / Fixed of GI barbed wire weight 9.3 Kg per 100m (min) between two ports fitted and fixed with GI staples on wooden plugs or GI binding wire tied to 6mm bar nibs, Complete Job |
| 360 | Repairs to barbed wire fencing, complete job |
| 361 | Hire charges of Hydraulic Excavator (JCB) with operator for emergent works during floods, frost or heavy rains as and when needed incl. operational charges and fuel for working hours involved. |
| 362 | Removal of dead animals from off take points including disposal within 50 mts comp job |
| 363 | Supplying and Laying of polythene sheets (Black) at off take points during lean dscharge / Freezing |
| 364 | Opening out old wire crates those and re-binding after filling. |
| 365 | Filling empty cement bags with sand/ earth including cost of bags and earth / sand (Earth or sand to be locally excavated) including all sorts of carriages upto actual site of work |
| 366 | Silt clearance from canals. Inclusive of initial lead and lift ( 50m & 1.5m respectively): |
| 367 | Slip clearance in ordinary soils disposal lead upto 50 m and lift upto 1.5 m |
| 368 | Silp clearance in soils; mixed with moorum/Kankar/shingle/boulders; disposal lead upto 50 m and lift upto 1.5 m |
| 369 | Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. |
| 370 | Cutting road and making good the same including supply of extra quantities of material i.e. crushed aggregate, moorum screening, red bajri and labour required. Water bound macadam. |
| 371 | Bituminous portion |
| 372 | Hire charges for welding plant for necessary repairs of pipe network/structures etc as per requirement including C/O operator, Genrator, welding rods, wiring and carriage of man and machinary complete in all respects as per requirement at site but excluding additional materials like collar, pipe specials, steel section etc. |
| 373 | Hand-packing stones in wire-crates; excluding cost of crates and stones |
| 374 | Crates made of Mesh type 10x12 (D=100 mm) Zn+PVC coated. Mesh wire diameter 2.70/3.70 mm (ID/OD). |
| 375 | Crates made of Mesh type 10x12 (D=100 mm) Zn+10% Al alloy +PVC coated. Mesh wire diameter 2.70/3.70 mm (ID/OD). |
| 376 | Dumping of stones excluding cost of stones in horizontal on level |
| 377 | Providing coloured Photographs as per requirement/ works executed at various places on photo paper of size 4\\"X6\\" |
| 378 | Providing Installation of tents for mela/ Necessary functions |
| 379 | Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete. |
| 380 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm |
| 381 | For thickness of tiles above 25 mm and upto 40 mm. |
| 382 | Supply and installation of Inverter with battery of standard make including all accessories for Control rooms etc. Complete JOB |
| 383 | Documentation of various offical documents/DPRs including. Paper Ream |
| 384 | Spiral Binding |
| 385 | Thermal Binding |
| 386 | Supply of Spun yarn |
| 387 | Supply of Nallah Muck including laying of same manually/ mechanically including all sorts of carriage complete |
| 388 | P/F of wooden pannelling work using budloo/Rat Wood including frame work made from 50x50mm wooden section of same type to prepare smooth base, c/o nails, wooden polish, all types of carriages complete in all respects. |
| 389 | Hire charges of Sumo for various anouncements regarding the water usage/registration/awarances etc including the mic, speaker, driver, fuel etc complete as per requirements and directions. |
| 390 | Supply and Installation of acrylic Boards 5 mm thick with laser cut etc. complete Job |
| 391 | Providing of Hammer 1 kg weight with handle |
| 392 | Providing of Hammer 1.5 kg weight with handle |
| 393 | Providing of Pick Axe with handle |
| 394 | Supply & installation of white board of required size with eassel & pointer incl. all carriages complete. 4'x6' |
| 395 | 6'x8' |
| 396 | Supplyying/installation of foldable & reusable Canopy Box type stall with JJM logo for laboratory staff during various programmes (Block Divas,B2V,VBSY etc) incl. all carriages complete. |
| 397 | Supplying/installation/testing & commisioning of 3 HP motor of Reputed/Standard Make incl. all sorts of carriages involved.complete job. |
| 398 | Supplying/installation/testing & commisioning of 4 HP motor of Reputed/Standard Make incl. all sorts of carriages involved.complete job. |
| 399 | Supplying of electrodes of approved make (ISI marked) for departmental welding machine. |
| 400 | Engagement of dewatering pump for arresting leakages including cost of fuel/ hire charges of pump and all carriages upto site of work complete |
| 401 | Hire Charge of Mini Truck for local shifting including all fuel complete |
| 402 | Hire Charge of Diesel Truck - 9 tonne ( without POL) |
| 403 | Hire Charge of Diesel Truck - 9 tonne including all fuel complete |
| 404 | Hire Charge of Tipper including all fuel etc complete |
| 405 | Carriage of material from divisional store up to dumping site of work, including loading, unloading and stacking etc. complete by Mechanical Transport . Cement & steel, G.I/C.I pipe avg. lead upto 01 Kms |
| 406 | Cement & steel, G.I/C.I pipe avg. lead upto 02 Kms |
| 407 | Cement & steel, G.I/C.I pipe avg. lead upto 03 Kms |
| 408 | Cement & steel, G.I/C.I pipe avg. lead upto 04 Kms |
| 409 | Cement & steel, G.I/C.I pipe avg. lead upto 05 Kms |
| 410 | Cement & steel, G.I/C.I pipe avg. lead beyond 5 Kms upto 10 Kms (per Km) |
| 411 | Cement & steel, G.I/C.I pipe avg. lead beyond 10 Kms upto 20 Kms (per Km) |
| 412 | Cement & steel, G.I/C.I pipe avg. lead beyond 20 Kms per additional Km |
| 413 | Sand & Agg. 20 mm avg. lead of upto 01 Kms |
| 414 | Sand & Agg. 20 mm avg. lead upto 02 Kms |
| 415 | Sand & Agg. 20 mm avg. lead upto 03 Kms |
| 416 | Sand & Agg. 20 mm avg. lead upto 04 Kms |
| 417 | Sand & Agg. 20 mm avg. lead upto 05 Kms |
| 418 | Sand & Agg. 20 mm avg. lead beyond 5 Kms upto 10 Kms (per Km) |
| 419 | Sand & Agg. 20 mm avg. lead beyond 10 Kms upto 20 Kms (per Km) |
| 420 | Sand & Agg. 20 mm avg. lead beyond 20 Kms per additional Km |
| 421 | 40 mm Agg. avg. lead of upto 01 Km |
| 422 | 40 mm Agg. avg. lead upto 2 Kms |
| 423 | 40 mm Agg. avg. lead upto 3 Kms |
| 424 | 40 mm Agg. avg. lead upto 4 Kms |
| 425 | 40 mm Agg. avg. lead upto 5 Kms |
| 426 | 40 mm Agg. avg. lead beyond 05 Kms upto 10 Kms (per Km) |
| 427 | 40 mm Agg. avg. lead beyond 10 Kms upto 20 Kms (per Km) |
| 428 | 40 mm Agg. avg. lead beyond 20 Kms per additional Km |
| 429 | Stone soiling avg. lead of upto 1 Km |
| 430 | Stone soiling avg. lead upto 2 Kms |
| 431 | Stone soiling avg. lead upto 3 Kms |
| 432 | Stone soiling avg. lead upto 4 Kms |
| 433 | Stone soiling avg. lead upto 5 Kms |
| 434 | Stone soiling avg. lead beyond 05 Kms upto 10 Kms (per Km) |
| 435 | Stone soiling avg. lead beyond 10 Kms upto 20 Kms (per Km) |
| 436 | Stone soiling avg. lead beyond 20 Kms per additional Km |
| 437 | Carriage of pipes from divisional store up to dumping site of work, including loading, unloading and stacking etc. complete by Mechanical Transport . 100 mm and 125 mm dia DI/ GI pipes 1Km |
| 438 | 100 mm and 125 mm dia DI/ GI pipes 2Km |
| 439 | 100 mm and 125 mm dia DI/ GI pipes 3Km |
| 440 | 100 mm and 125 mm dia DI/ GI pipes 4Km |
| 441 | 100 mm and 125 mm dia DI/ GI pipes 5Km to 10 Km |
| 442 | 100 mm and 125 mm dia DI/ GI pipes 10Km to 20 Km |
| 443 | 100 mm and 125 mm dia DI/ GI pipes beyond 20 Km every additional lead |
| 444 | 150 mm to 200 mm dia DI pipes 1 Km |
| 445 | 150 mm to 200 mm dia DI pipes 2 Km |
| 446 | 150 mm to 200 mm dia DI pipes 3 Km |
| 447 | 150 mm to 200 mm dia DI pipes 4 Km |
| 448 | 151 mm to 200 mm dia DI pipes 5 Km |
| 449 | 150 mm to 200 mm dia DI pipes 5Km to 10Km |
| 450 | 150 mm to 200 mm dia DI pipes 10Km to 20Km |
| 451 | 150 mm to 200 mm dia DI pipes beyond 20Km for every additional lead |
| 452 | Carriage of material from dumping site to actual site of work, including loading, unloading and stacking etc. complete by manual labour. Cement for an avg. lead upto 50 mtr. |
| 453 | Cement for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs. |
| 454 | Steel for an avg. lead upto 50 Mtr |
| 455 | Steel for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs. |
| 456 | Pipe for an avg. lead upto 50 Mtr |
| 457 | Pipe for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs. |
| 458 | Sand & Agg.20mm for an avg. lead upto 50 Mtr |
| 459 | Sand & Agg.20mm for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs. |
| 460 | 40mm Agg. for an avg. lead upto 50 Mtr |
| 461 | 40mm Agg. for an every additional lead of 50 mtrs or part thereof beyond 1st 50 mtrs. Please Enable Macros to View BoQ information |
