|
| 1 | (1) C/o CC Footpath including steel railing |
| 2 | Granular Sub-Base with Coarse Graded Material (Table:- 400- 2) Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. |
| 3 | Dry Lean Cement Concrete Sub- base Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing. |
| 4 | Cement Concrete PavementConstruction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation ncluding provision of contraction, expansion, onstruction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing. |
| 5 | Steel work riveted or bolted in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. |
| 6 | (1.1)SSH: Maintenance of public toilet. |
| 7 | Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1:3 (1 cement : 3 fine sand ) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1 .5 coarse sand :3 stone aggregate 20 mm nominal size) |
| 8 | Centring and shuttering including strutting proping etc. and removal of form work for: |
| 9 | c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height) |
| 10 | Reinforcement of RCC work including bending, binding and placing in position complete. |
| 11 | b) Tar/ TMT steel |
| 12 | Providing approved best available local wood (Class-BII) work in frames of doors, windows clerestory windows and other frames,wrought framedand fixed in position |
| 13 | Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including aluminium butt hinges with necessary screws |
| 14 | Providing and fixing 40x3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1:3:6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size) |
| 15 | Providing and fixing MS grills of required pattern in wooden frames of window setc with MS flat, square or round bars with round headed bolts and nuts or by screws. |
| 16 | b) Ornamental grill. |
| 17 | Providing and fixing MS sliding door bolts, bright finished or and black enamelled with nuts and screws etc complete |
| 18 | a) 300 x 16 mm |
| 19 | Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessary screws etc complete |
| 20 | a) 300 x 10 mm |
| 21 | c) 150 x 10 mm |
| 22 | Providing and fixing aluminum Handles anoised transparent or dyed to required color or shade with necessary screws etc complete |
| 23 | a) 125 mm |
| 24 | b) 100 mm |
| 25 | Providing and fixing MS Hooks and Eyes. |
| 26 | b) 150 mm |
| 27 | Cement concrete flooring 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement. |
| 28 | c) 75 mm thick |
| 29 | Cement plaster skirting (up to 30 cm height) with cement mortar 1 : 3 (1 cement : 3 coarse sand) finishedwith a floating coat of neat cement, including rounding of junctions with floor. |
| 30 | b) 21 mm thick |
| 31 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete |
| 32 | a) Size of Tile 500 x 500 mm |
| 33 | Providing and fixing on wall face C.I. rain water pipe including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 (1 cement : 2 fine sand) |
| 34 | b) 100 mm diameter pipe |
| 35 | Providing and fixing M.S.Holder bat clamps of approved design of C.I. or S.C.I. pipes embedded in and including cement concrete block 10 cm x 10 cm x 10 cm of 1:2:4 mix (1cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) including cost of cutting hole sand making good the wall etc |
| 36 | b) 100 mm diameter |
| 37 | Providing and fixing on wall face C.I. accessories for rain water pipes including filling the joints with spun yarn soaked inneat cement slurryand cement mortar 1 : 2 ( 1 cement: 2 fine sand). |
| 38 | b) 100 mm diameter |
| 39 | 12 mm cement plaster 1 : 3 (1 cement : 3 fine sand). |
| 40 | 15 mm cement plaster 1 : 3 (1 cement : 3 fine sand) |
| 41 | White washing with whiting on new work (three or more coats) to give even shade. |
| 42 | Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work including priming coat of whiting to give an even shade. |
| 43 | Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete. |
| 44 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade |
| 45 | Applying priming coat with ready mixed primer of approved brand and manufacture on steel work |
| 46 | Painting two ormore coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade. |
| 47 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1cement : 3 coarse sand : 6 stone aggregate using 20 mm nominal size) over 75 mm bed of stone ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finsihing the top smooth. |
| 48 | Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1:3:6 (1cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge) 8 cm thick on side sand bottom and plastering on all exposed surface swith 12 mm thick cement mortar 1 : 3 (1cement : 3 fine sand) including shuttering complete. |
| 49 | Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work). |
| 50 | a) 15 mm nominal bore |
| 51 | b) 20 mm nominal bore |
| 52 | Providing and fixing brass bib cock of approved quality. |
| 53 | Providing and fixing brass stop cock of approved quality. |
| 54 | Providing and fixing PVC connection pipe with brass union. |
| 55 | Providing and fixing white vitreous china water closet squating pan (Indian type WC pan)size 580mmwith100mmandsandcast ironP orS trap,12.5LitrehighlevelCI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvanized steel telescopic flush pipe with fitting sand clamps 20 mm GIover flowpipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting and making good the walls and floors where required |
| 56 | Providing and fixing 12.5 litres high level CI flushing cistern of approved make with integral fittings such as ball valve, bell, lever, GI chain and pull complete. |
| 57 | Providing and fixing white vitreous china wash basin with RS or CI brackets painted white15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass tra pand MI unions complete,including cutting and making good the walls where required |
| 58 | a)Flatback wash basinsize 550x400mmwithapairof15 mmCP brass pillartapsof heavy quality |
| 59 | Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleats with CP brass screws and washers. |
| 60 | Providing and fixing 600 x 120 mm glass shelf with CP brass brackets and guard rail complete, fixed to wooden cleats with CP brass screws. |
| 61 | Providing and fixing CPbrasstowel rail completewith CPbrass bracketsfixed to wooden cleadt with CP brass screws (heavy quality). |
| 62 | Providing and fixing toilet paper holder. a) CP Brass |
| 63 | Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes |
| 64 | a) 100 mm dia |
| 65 | Providing and fixing sand cast iron heel rest sanitary bend. |
| 66 | a) 100 mm dia |
| 67 | Providing and fixing sand cast iron single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. |
| 68 | a) 100 x 100 x 100 mm |
| 69 | (2) Cleaning and desiltation of drainage at backside of Rajiv Gandhi Polytechnic collage, itanagar. |
| 70 | Hill Side Drain Clearance (Removal of earth from the choked hill side drain and disposing it on the valley side manually) |
| 71 | (3). Construction of 07 Nos. of ring wells Ganga to DN college, Itanagar. |
| 72 | Excavation in foundation trenches not exceeding 1.50 m width or 10 Sq.m.on plan or drains not exceeding 1.50 m in width or 10 Sq.m. on plan including dressing of sides and ramming of bottoms, lift upto 1.50 m including getting out the excavated soil as directed,within a lead of 50 m. |
| 73 | c) Hard Rock requiring chiselling (where blasting is probihited) |
| 74 | Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete. |
| 75 | Providing and laying cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering in : |
| 76 | b) Walls including attached buttresses, pilasters and their caps and bases and string courses etc. up to floor two level. |
| 77 | Centring and shuttering including strutting proping etc. and removal of form work for: |
| 78 | b) Walls including attached buttresses, pilasters etc Please Enable Macros to View BoQ information |
