Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead, all complete job and as per direction of Engineer-in-charge. For thickness of tiles 10 mm to 25 mm |
| 2 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead, all complete job and as per direction of Engineer-in-charge. |
| 3 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved as per the direction of Engineer-in-Charge or in the area marked by Indore Municipal Corporation (IMC) (Presently it is Devguradia which is around 20 km away from the institute). Rate shall be includive of, lifting of material, transportation, statutory fees, if any of IMC etc., complete as per the requirement of site & as per directions of Engineer-in-Charge. |
| 4 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m etc., complete as per the requirement of site & as per directions of Engineer-in-Charge. All kinds of soil |
| 5 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.All kinds of soil |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for: Columns, Pillars, Piers, Abutments, Posts and Struts etc., complete as per the requirement of site & as per directions of Engineer-in-Charge. |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-lll) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) etc., complete as per the requirement of site & as per directions of Engineer-in-Charge |
| 8 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, making holes, fixing in position and applying a priming coat of approved steel primer all etc., complete job as per the requirement of the site and the direction of the Engineer-in-Charge |
| 9 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat (Epoxy Zinc Phosphate) of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes etc., complete as per the requirement of site & as per directions of Engineer-in-Charge. |
| 10 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to f loor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) etc., complete as per the requirement of site & as per directions of Engineer-in-Charge |
| 11 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) etc., complete as per the requirement of site & as per directions of Engineer-in-Charge |
| 12 | Steel reinforcement Thermo-Mechanically Treated bars of grade Fe-500D or more for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level etc., complete as per the requirement of site & as per directions of Engineer-in-Charge. |
| 13 | Providing and fixing of ‘Unistone’ or equivalent Glass Reinforced Concrete Wall Cladding Tiles in approved design, size, texture, thickness, pattern and color. The thickness of the tiles should range between 12 to 18 mm (depending on the texture of the tile), allowing variance of ±2 mm in accordance with IS: 1237 -1980. The composition of tiles should be ‘43’ Grade Portland cement, reinforced with Alkali Resistant Glass Fiber and homogeny pigmentation should be done with exterior grade synthetic inorganic iron oxide pigments manufactured by ‘BAYFERROX / LANXESS (Germany)’ or equivalent. The pigmentation should be homogeneous and in accordance with British Standards BS EN 12878:1999. The other additives should be fine washed graded quartz, super plasticizers and integrated water proofing agents and others. The tiles should be produced with high vibration technology and concrete mix design compressive strength equivalent to M - 40 Grade@28 days. The top surface of the tiles should be sealed with acrylic lacquer resulting in surface water absorption of tiles, less than 1% and water absorption by 24 hr immersion method, less than 8%. The tiles should be applied on a rough plaster of 1:3 cement mortar 1:3 (1 cement: 3 coarse sand) and the fixing of tiles should be done by ‘Unistone’ tile adhesive or equivalent as per manufacturer’s laying instruction, all the joint shall be filled with suitable colour of silicon/ Epoxy grout etc., complete as per the requirement of site & as per directions of Engineer-in-Charge. |
| 14 | Providing and fixing torsion spring Plank Ceiling System Hunter Douglas make of approved finish comprising of Plank of 600mmx1200mm/ 300mmx2400mm or required size long manufactured out of 0.9mm thick Aluminium Alloy 3105 perforated 1.5mm dia With 22% open area. The metal ceiling panels shall be downward accessible with a minimum of four (4) torsion springs per panel. The Plank will be manufactured on advanced CAD/CAM equipment that includes several levelling stages in the manufacturing process. Torsion Spring panel with two side legs die formed and two end legs die formed and punched to receive torsion springs (min two springs each end or side) for secure engagement into Tee Grid main runners which are factory punched to receive torsion springs. Planks will be square edged. The metal ceiling panels shall be downward accessible with a minimum of four (4) torsion springs per panel. The Plank shall be Polyester powder coated in desired colour. All complete as per drawings, specification and direction of the Engineer in Charge. All Ceiling products shall adhere to Green Pro Certification. The Metal ceiling is Tested for Seismic Zone V compliance as per IS 1893 part 1-2016” Main Runners: 24mm deep, inverted “Tee” sections, 3.6m long, with factory punched flanges to receive torsion spring assembly. Main Tee on centre spacing to match panel length. Cross Runners: 24 mm deep, inverted “Tee” sections designed to interlock in to web of main tee section on designated spacing. Cross tee length to match panel length. Cross tees are spaced spacing 1200mm on centre maximum. Suspension System: As per manufacturer standard considering type of plenum and its height. Paint finish – The panels will be pre treated in latest nano technology process and electro statically powder coated with automatic Carona system and cured with gas catalytic technology. Acoustic Felt (Optional): Non-woven felt made of glass-reinforced fibre glued over the perforation for sound absorption. NRC- 0.7 etc. complete as per the requirement of site & as per directions of Engineer-in-Charge.Approved Make : Hunter Douglas, SAS, Gordan |
| 15 | Providing & Fixing of 12mm ply conforming to IS 5509, complete as per the site requirement and as per the direction of engineer in charge. |
| 16 | Providing and fixing of rewritable board using rewritable laminate of merino or equivalent make ideal for both dry and wet erase markers, offering great versatility and decorative opportunities, having quality of stain resistant, scratch resistant writeons, impact resistant, moisture resistant etc with backing of 6 mm FR+ grade ply conforming to IS 5509 etc., complete as per the requirement of site & as per directions of Engineer-in-Charge. |
| 17 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels etc., complete as per the requirement of site & as per directions of Engineer-in-Charge.. Area of slab over 0.50 sqm |
| 18 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level-Cement mortar 1:3 (1 cement :3 coarse sand) etc., complete as per the requirement of site & as per directions of Engineer-in-Charge. |
| 19 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) etc., complete as per the requirement of site & as per directions of Engineer-in-Charge. |
| 20 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth etc., complete as per direction of Engineer-in-Charge. |
| 21 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality, all complete job and as per direction of Engineer-in-charge.1.0 mm thick |
| 22 | Designing, fabricating, testing, installing and fixing in position CurtainWall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including:(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4 mm thick aluminium composite panel material consisting of 3 mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5 mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified usingstainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places., , complete as per the site requirement and as per the direction of engineer in charge. |
| 23 | Providing & fixing skylight at terrace level with multi cell/tight cell polycarbonate panel system 12mm thick of make danpalon or GE (minimum) confiring to specifications. Panel will be 12 mm thick (min.) single panel. The weight of the panel will be 2550 gram per square meter. panel width shall not be less than 900mm to ensure best performance for wind uplift, viration, oil canning and visual appearance palens shall be manufactured with vertical standind seam-locking mechanism to ensure maximum uplift capability etc., complete as per the requirement of site & as per directions of Engineer-in-Charge. |
| 24 | Providing, supplying, fabricating and installing tensile membrane roofing system using “Serge Ferrari Flexlight Advanced 902 S2” or approved equivalent, Weight ~ 950 g/m², thickness ~ 0.72 mm, yarn - High tenacity Polyester ~ 1100 Dtex, UV transmittance ~ 0%, solar reflectance index (SRI) ASTM E1980-01 (Approach II) >95% etc (mechanical properties - average values with a +/-5%, variance of +/-10% for weight). complete in all respects as per site requirement , direction of Engineer-in-charge. The work shall include supply of PVDF Précontraint® technology, cutting, patterning, heat welding, edge reinforcement, fixing with suitable aluminum/steel clamping plates, SS fasteners, tensioning arrangement, accessories, and installation at all heights and levels, including all labour, tools, tackles, scaffolding, and testing, all complete job and as per direction of Engineer-in-charge. Serge Ferrari Flexlight advanced 902 S2 or equivalent with 15 years warranty from OEM. |
| 25 | Providing & fixing tension tie rod using hot dip galvanised cable 10 mm (Usha Martin brand or equivalent) including nuts, washers, anchorage, fixing, tensioning etc, all complete job and as per direction of Engineer-in-charge. |
| 26 | Providing and chemical rebaring 12 mm dia,5.8 grade, 100 to 150 mm embedment (Make-HILTI) using chemical anchoring system including drilling of holes of required diameter and depth in RCC members using rotary hammer drill or appropriate tools/ equipment, cleaning of holes with compressed air and brush, injecting approved chemical injection mortar HILTI RE 200 and inserting threaded anchoring rod/fastener with proper alignment, including threaded rod, bolts. washers, chemical mortar, required accesories etc., complete job in all respects as per manufacturer’s specifications and direction of Engineer-in-Charge. |
| 27 | Providing and laying vitrified floor tiles in required sizes(600x600/ 600x1200 or as per the choise of Engineer-in-Charge) as required / directed by Engineer-in-charge (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc.,all complete job and as per direction of Engineer-in-charge. |
| 28 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 29 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade all complete job and as per direction of Engineer-in-charge. |
| 30 | Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives, all complete job and as per direction of Engineer-in-charge. New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm, all complete job and as per direction of Engineer-in-charge. |
| 31 | Finishing walls with textured exterior paint of required shade, all complete job and as per direction of Engineer-in-charge. : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm etc. all complete as per the direction of Engineer-in-charge. |
| 32 | In-situ BenchProviding and constructing in-situ bench finished with 12mm FR+ grade ply conforming to IS 5509 and HR foam of 50 density along with cushioning upholstered with Leatherite fabric of minimum 530 GSM, and thickness of 1.2 mm, ensuring durability and comfort.Including finishing,stitching, fixing, labour and materials (adhesive, nails, brackets, pins, etc) etc. as per approved design , all complete job and as per direction of Engineer-in-charge. |
| 33 | Outdoor planter bedProviding, constructing and developing outdoor planter bed constructed with durable masonry edging, layered soil medium, and a curated mix of ornamental shrubs and foliage plants, designed to enhance landscape aesthetics while providing structured greenery along the pathway of approved size, shape and layout, comprising of brick masonry edging or kerb with plaster, waterproof with Dr. Fixit Fastflex (113) to be used in coating and Dr. Fixit Pidiproof LW+ to be added in plaster.Filled with good quality garden soil, manure and necessary soil treatment, complete. ht.450 mm , width 450 mm, etc. all complete job and as per direction of Engineer-in-charge. |
| 34 | Indoor planter bedProviding, constructing and developing indoor planter bed constructed with durable masonry edging, layered soil medium, and a curated mix of ornamental shrubs and foliage plants, around the in-situ seating of approved size, shape and layout, comprising brick masonry edging or kerb with plaster and waterproofing with Dr. Fixit Fastflex (113) to be used in coating and Dr. Fixit Pidiproof LW+ to be added in plaster.Filled with good quality garden soil, manure and necessary soil treatment, complete. ht.300 mm, width - 300 mm, etc. all complete job and as per direction of Engineer-in-charge. |
| 35 | Soil for plantersProviding, supplying and filling good quality garden soil mixed with manure/compost in planter boxes of approved size and depth, including loosening, screening and preparation of soil media suitable for plantation, all complete job and as per direction of Engineer-in-charge. |
| 36 | Sofa Set (3 seater)Providing, supplying and placing in position a sofa (MRP Rs. 1,32,000/-) seating unit of approved design and make Godrej / Fetherlite/ Durian (MEAGAN) fabricated with a stainless steel structure and premium leatherette finish, supported on a solid wood frame to ensure strength, durability and stability. The upholstery and seat covering shall be of premium leatherette, with seating supported by high-density foam filling to provide adequate comfort and resilience. The sofa shall have a matte finish and shall be supplied in Galaxy Blue/ Slate Grey colour, as per Engineer-in-Charge. The item shall carry a minimum warranty of five (5) years against manufacturing defects from OEM.The rate shall be includes of all materials, transportation, handling, cutting, fabrication, labour and all incidental charges, complete in all respects, as per approved design, detailed finish specifications, and as directed by the Architect , all complete job and as per direction of Engineer-in-charge. |
| 37 | Table type 1 (Size - 3'x3'x2'6\\" or as approved by Engineer-in-Charge)Providing, supplying and placing in position table (Min. base price Rs. 6,100/-) of approved size and design, comprising acacia wood top of 50 mm thickness with smooth machine finish and protective clear PU coating, supported on powder-coated MS frame legs complete. Specifications as per detailed finishes sheet. Design Specifications as per detailed finishes sheet. The rate shall be inclusive of all materials, transportation, handling, cutting, fabrication, labour, taxes and all incidental charges, complete in all respects, as per approved design, detailed finish specifications, and as directed by the Architect all complete job and as per direction of Engineer-in-charge. |
| 38 | Table type 2 (Size - 2' dia, 2'6\\" ht. or as approved by Engineer-in-Charge)Providing, supplying and placing in position round café table (Min. base price Rs. 5,400/-) of approved diameter and height, comprising full body stone finished top of 15 mm thicknesswith smooth surface, supported on powder-coated MS central pedestal base with circular base plate, complete.Specifications as per detailed finishes sheet. Design Specifications as per detailed finishes sheet. The rate shall be inclusive of all materials, transportation, handling, cutting, fabrication, labour, taxes and all incidental charges, complete in all respects, as per approved design, detailed finish specifications, and as directed by the Architect, all complete job and as per direction of Engineer-in-charge. |
| 39 | Table type 3 (Size- 3' dia, 2'6\\" ht. or as approved by Engineer-in-Charge)Providing, supplying and placing in position designer café table (Min. base price Rs. 7,500/-) of approved size, shape and height, full body stone finished top of 15 mm thickness with smooth surface and edge finishing, supported on moulded metal pedestal base of approved profile, complete.Specifications as per detailed finishes sheet. Design Specifications as per detailed finishes sheet. The rate shall be inclusive of all materials, transportation, handling, cutting, fabrication, labour, taxes and all incidental charges, complete in all respects, as per approved design, detailed finish specifications, and as directed by the Architect, all complete job and as per direction of Engineer-in-charge. |
| 40 | Table type 4 (3'6\\" ht. )Providing, fabricating, supplying and fixing in position hanging/suspended tableof approved size and design, and placing in position table of approved size and design, comprising acacia wood top of 50 mm thickness with smooth machine finish and protective clear PU coating, supported on powder-coated MS frame brackets, rods of 18 Gauge Thickness, complete. Specifications as per detailed finishes sheet. Design Specifications as per detailed finishes sheet. The rate shall be inclusive of all materials, transportation, handling, cutting, fabrication, labour, taxes and all incidental charges, complete in all respects, as per approved design, detailed finish specifications, and as directed by the Architect, all complete job and as per direction of Engineer-in-charge. |
| 41 | Table type 5 (Size 5' x 2'6\\" x 2'6\\" or as approved by Engineer-in-Charge)Providing, supplying and placing in position café table (Min. base price Rs. 10,000/-) of approved size and design, full body stone finished top of 15 mm thickness with smooth surface and edge finishing, supported on powder-coated MS frame of 18 gauge thickness, complete. Design Specifications as per detailed finishes sheet, all complete job and as per direction of Engineer-in-charge. |
| 42 | Table type 6 (Size 1'3\\" x 1'3\\" x 1' or as approved by Engineer-in-Charge)Providing, supplying and placing in position side table (Min. base price Rs. 4,000/-) of approved size and design, made from acaia wood panels of required 25 mm thickness with machine-cut edges, smooth polished finish and concealed joints, complete. Design Specifications as per detailed finishes sheet, all complete job and as per direction of Engineer-in-charge. |
| 43 | Chair type 1 -(600X600X450 MM or as approved by Engineer-in-Charge)Providing, supplying and placing in position designer chair (Min. base price Rs. 3,500/-) of approved size and design, comprising moulded plastic seat and backrest with smooth finish, supported on solid wood legs/frame duly seasoned, machine-cut, joined, screwed and polished, complete. Design Specifications as per detailed finishes sheet, all complete job and as per direction of Engineer-in-charge. |
| 44 | Chair type 2 -(600X600X450 MM or as approved by Engineer-in-Charge)Providing and supplying chairs(Min. base price Rs. 4,700/-) of approved design, with seat and backrest made of moulded plywood formed into a single-piece ergonomic shell with smooth finish and rounded edges. The seat shall be upholstered with Leatherite fabric of minimum 530 GSM, and thickness of 1.2 mm, ensuring durability and comfort. The chair shall be supported on a mild steel tubular frame made of 18-gauge metal, finished with powder coating/epoxy coating for corrosion resistance and durability. The legs shall be fitted with non-marking PVC floor protectors to prevent damage to flooring. The frame shall be securely fixed to the seat using concealed fasteners, ensuring structural stability and a clean appearance.The rate shall be inclusive of all materials, transportation, loading and unloading, handling, cutting, fabrication, fixing, labour, taxes and all incidental charges, complete in all respects, as per approved design, detailed finish specifications indicated in the finishes schedule, all complete job and as per direction of Engineer-in-charge. |
| 45 | Chair type 3 (dia-1'2\\" ht- 2'8\\" or as approved by Engineer-in-Charge)Providing and supplying high bar stools (Min. base price Rs. 4,700/-) of approved design and size (400(dia)x800mm(seat ht)), with curved/contoured solid wood seat finished with approved melamine polish for durability and smooth appearance.The seat shall be upholstered with Leatherite fabric of minimum 530 GSM, and thickness of 1.2 mm, ensuring durability and comfort. The stool shall be supported on a mild steel tubular frame made of 18-gauge metal, finished with epoxy/powder coating to ensure corrosion resistance and long service life. The frame shall include a footrest ring and cross bracing to provide adequate strength, comfort and stability. All joints shall be properly welded, ground smooth and finished neatly to achieve a uniform finish. The stool shall be fitted with non-marking PVC bushes at the bottom to protect the floor surface.The rate shall be inclusive of all materials, transportation, loading and unloading, handling, cutting, fabrication, fixing, labour, taxes and all incidental charges, complete in all respects, as per approved design, detailed finish specifications indicated in the finishes schedule , all complete job and as per direction of Engineer-in-charge. |
| 46 | Chair type 4 (600X600X450 MM(lxbxh) or as approved by Engineer-in-Charge)Providing and supplying arm chairs (Min. base price Rs. 4,100/-) of approved design and size(600X600X450 MM(lxbxh)) , with seat and backrest made of moulded MS frame structure, upholstered with fabric or leatherette of approved make and shade, ensuring comfort and durability. The chair shall be supported on a mild steel tubular frame made of 18-gauge metal, including legs and armrest structure, finished with epoxy/powder coating for corrosion resistance and long-lasting performance. All joints shall be properly welded, ground smooth and neatly finished to achieve a uniform and refined appearance. The legs shall be provided with non-marking PVCn floor protectors to safeguard the flooring surface.The seat shall be upholstered with Leatherite fabric of minimum 530 GSM, and thickness of 1.2 mm, ensuring durability and comfort.The rate shall be inclusive of all materials, transportation, loading and unloading, handling, cutting, fabrication, fixing, labour, taxes and all incidental charges, complete in all respects, as per approved design, detailed finish specifications indicated in the finishes schedule, all complete job and as per direction of Engineer-in-charge. |
| 47 | Chair type 5 (24\\" x 23\\" x 33\\"or as approved by Engineer-in-Charge)Providing and supplying Metal Outdoor Wireframe Chair (Min. base price Rs. 2,400/-) With Wooden Seat of approved design of kernig kraft make or equivalent.All components shall be properly assembled and finished neatly, complete in all respects, as per approved design and detailed finish specifications indicated in the finishes schedule.The rate shall be inclusive of all materials, transportation, loading and unloading, handling, cutting, fabrication, fixing, labour, taxes and all incidental charges, complete in all respects, as per approved design, detailed finish specifications, all complete job and as per direction of Engineer-in-charge. |
| 48 | Bean BagProviding and supplying bean bag chair (Min. base price Rs. 2,400/-) made of high-quality leatherette of 530 gsm or or as approved by Engineer-in-Charge outer cover with double stitching and zipper, filled with EPS thermocol beans of approved density, complete in all respects, all complete job and as per direction of Engineer-in-charge. |
| 49 | Wall Art PaintingProviding and executing wall paint art on interior wall surface using approved quality acrylic paints,as per approved design, complete in all respects. Including surface preparation, primer coat, base paint, hand painting/digital projection outlining, finishing coat, labour, materials and scaffolding as required, all complete job and as per direction of Engineer-in-charge. |
| 50 | PartitionProviding and fixing planter box made of FR+ grade ply conforming to IS 5509 with laminate finish , complete with MS support frame of size 1.5\\" x 1.5\\" of 6 gauge thickness where required, as per approved design having depth 1'2\\", Including necessary supports, finishing, labour and transportation,all complete job and as per direction of Engineer-in-charge. |
| 51 | Landscaping (Plantation)Providing, supplying and placing ornamental plants of approved variety in decorative pots including potting mixture (garden soil, sand and manure), transportation, placement at designated locations and initial maintenance all complete job and as per direction of Engineer-in-charge.(Detailed specifications of all plants are provided in the Technical Specifications section) |
| 52 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required, all complete job and as per direction of Engineer-in-charge. Group C |
| 53 | Wiring for group controlled (looped) light point/fanpoint/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required, all complete job and as per direction of Engineer-in-charge. Group C |
| 54 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required, all complete job and as per direction of Engineer-in-charge. |
| 55 | Provding and fixing of 12 W LED downlight in Natural White colour temprature. CRCA powder coated frame with glare freediffused polycarbonate cover. Source Manufacturer from NABL approved lab. Manufacturer manadatory i/c connection wire, testing etc., all complete job and as per direction of Engineer-in-charge.2 Yrs Guarantee certificate from manufacturer. (Make-Jaquar NERO SURFACE or Philips Full Glow) |
| 56 | Providing and fixing of 10 W LED COB Light in Natural White colour temprature. CRCA powder coated frame with glare freediffused polycarbonate cover. Source Manufacturer from NABL approved lab. Manufacturer manadatory i/c connection wire, testing etc. to complete the job. 2 Yrs Guarantee certificate from manufacturer, all complete job and as per direction of Engineer-in-charge. (Jaquar Eris Surface Round or Philips Surface Synthetic Spot 12w) |
| 57 | Providing and fixing of 15 W LED COB Light in Natural White colour temprature. CRCA powder coated frame with glare freediffused polycarbonate cover. Source Manufacturer from NABL approved lab. Manufacturer manadatory i/c connection wire, testing etc, all complete job and as per direction of Engineer-in-charge. |
| 58 | proving and fixing of IP 20 cove light in Natural White colour temprature. The cove light shall consist of 120 LEDs per meter, providing a luminous efficacy of 90–100 lumens per watt, and shall be powered through a suitable power supply adapter to ensure consistent and safe operation. The LED strip shall be mounted on a profile light channel and covered with a PVC diffuser, as per the approved design and installation requirements, all complete job and as per direction of Engineer-in-charge. |
| 59 | providing and fixing of 20 W rectangular linear hanging LED light fitting (size approx. 7.5ftx3.9ft) made of extruded aluminium housing with opal diffuser, complete with LED driver, suspension wire/rod, internal wiring, connectors and all fixing accessories, suitable for operation on 220–240 V, 50 Hz AC supply, as required.LED rectangular linear hanging light, all complete job and as per direction of Engineer-in-charge. |
| 60 | providing and fixing of 20 W Hemis Pendant Light Modern Decorative Hanging make- Jaguar/philips, all complete job and as per direction of Engineer-in-charge. |
| 61 | providing and fixing 40W LED Round Hanging Light (Size approx. 3600mm) in natural White Colour make make- as per approved by Engineer-In- charge, all complete job and as per direction of Engineer-in-charge. |
| 62 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required., all complete job and as per direction of Engineer-in-charge. |
| 63 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 64 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 65 | 4 X 16 sq. mm + 2 X 6 sq. mm earth wire |
| 66 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required , all complete job and as per direction of Engineer-in-charge.(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.). 12 way (4 + 36), Double door |
| 67 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required, all complete job and as per direction of Engineer-in-charge. |
| 68 | Supplying and fixing following rating, four pole, 415 V, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A, all complete job and as per direction of Engineer-in-charge. |
| 69 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required, all complete job and as per direction of Engineer-in-charge. |
| 70 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required, all complete job and as per direction of Engineer-in-charge. 20 mm |
| 71 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required, all complete job and as per direction of Engineer-in-charge. 25 mm |
| 72 | Supply, Installation, testing and commissioning of wall fan with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required, all complete job and as per direction of Engineer-in-charge.Make- Crompton, Model Name- High Flo Wave Plus, Model No.WMHFWAVPL16KDW or equivalent in Havells etc. |
| 73 | Supplying, installation, Testing and commissioning of following capacity 24 port Layer 2 indoor Network Switch having features and specifications etc. as mentioned here under: At least 24 X RJ-45 Gigabit Ethernet Ports and additional 2 X 10G Base -T with 4 X SFP Ports with non-blocking architecture by having Switching capacity of min. 168Gbps and packet forwarding rate of 125Mpps or higher, 16K MAC table. Console Port, USB port, Stacking support of min. 8 units per stack. Internal dual AC Power supply, STP, RSTP, MSTP, BPDU Filter, BPDU Restriction, Min. 9K Jumbo Frame, LBD, IGMP Snooping V1/V2/V3, MLD Snopping V1/V2. IGMP /MLD Groups 1K or more, IPv4/IPv6 Loopback Interface, 16 L3 IP Interface, Ipv6 ND, VRRPv3, UDP Helper, ECMP. VLAN: 802.1Ǫ, Port based, Ǫ-in-Ǫ, Multicast VLAN, Protocol VLAN, VLAN Trunking, DHCP Snopping, Server, server Screening. RADIUS , TACACS+ Authentication, ǪoS: 802.1P, 8 queues per port, ǪoS : WRR, Strict+WRR, WRED, 802.1p. ACL: MAC based, IPv4C IPv6, TCP/UDP Port number, time based ACL, TFTP Client, SNMP V1, v2c, v3, SNMP traps, RMON, DHCP server, relay, client, LLDP, LLDP-MED, OAM, Dying Gasp, 802.3ah, sflow, RIP, OSPF v2/v3, policy based route, SSL, SSH. 6 kV surge protection on all Gigabit Ethernet ports and on all GE RJ-45 access ports. Certifications: UL, CE, FCC, RoHS, MTCTE, OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India etc. complete as required, all complete job and as per direction of Engineer-in-charge. 24 port PoE Layer 2 Network Switch with PoE Support of 370W or higher with each copper port supporting 802.3at PoE+ min., all complete job and as per direction of Engineer-in-charge. |
| 74 | Supplying, Installation, Testing and commissioning of small form-Pluggable (SFP) for Network Switches. Must be hot Pluggable, RoHS Complaint, etc. complete as required., all complete job and as per direction of Engineer-in-charge. 10 G SFP + Single Mode/Multi Mode |
| 75 | Supplying, Installation, Testing and commissioning of indoor Wireless Access Point for High density use having features and specifications etc. as mentioned here under- WiFi6 802.11ax 574Mbps (2.4GHz) + 2402Mbps (5GHz), WIFI 6 Certified, 1 x RJ45 console port, MG 2.5G LAN POE Port, factory reset, WPA/WPA2/WPA3™ Personal/Enterprise, WEP 64/128-bit, SSID broadcast disable, MAC address access control, Internal RADIUS server, SNMP, Customizable Captive Portal, Auto Channel, Works as Access Point, WDS, WDS with AP, Wireless Client ., Web (HTTP), Secure Socket Layer (SSL), Traffic control, Support ATF/Fast oaming/Band Steering, Supports enhanced security – WPA-PSK/WPA2- PSK/WPA3-PSK and RADIUS client, and Cipher negotiation, and MAC/ IP ACL for networks, Certifications: MTCTE, CE, FCC. Works as Standalone, Compatible with S/W & H/W Controller with addtional features like - Real-Time Monitoring and Alerts, Rich Advanced Features, Centralized Device Management, Role-Based Administration, Real-Time Monitoring, VLAN and Access Control, Auto RF Management and Bandwidth Optimization, Multi-SSID and Captive Portal Authentication.OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India etc. complete as required., all complete job and as per direction of Engineer-in-charge. |
| 76 | Supplying Installation Testing and Commissioning of 24 port Cat6 /CAT6A Patch Panel loaded. Must be of 1U height with clear label holders and white label with the panel. 24 Ports Cat-6 Patch Panel should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D etc.all complete job and as per direction of Engineer-in-charge. |
| 77 | Supplying, Installation, Testing and commissioning of following CAT6A Patch Cord should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D etc.all complete job and as per direction of Engineer-in-charge. Copper Patch Cords of length 1m (3ft) |
| 78 | Supplying, Installation, Testing and commissioning of CAT6A Copper Information Outlet (IO) with face plate of color as per site requirement, should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D. All copper Cable and Components should be from same OEM to maintain compatibility and interoperability etc., all complete job and as per direction of Engineer-in-charge. |
| 79 | Supplying, Installation, Testing and commissioning of RJ45 Connector for CAT 6/6A Cables. RJ45 modular plug supports 4 twisted pairs, 8 positions, 8 connectors. Housing: PC, UL94V-2, transparent color, Use for 24- 26 AWG stranded wires etc., all complete job and as per direction of Engineer-in-charge. |
| 80 | Supplying, drawing, Testing and commissioning of Cat6A UTP 4 pair, 23 AWG solid copper cable in existing conduit/ on surface, U/FTP, LSZH, NonPlenum, Horizontal (solid) Cable suitable for high speed data networking application supporting upto 10Gbps over a 100 meter channel. The 4 Unshielded Twisted Pairs (UTP) cable with color coded insulation for easy indentification should have FLAME PROPERTIES i.e. Flammability Test - IEC 60332-1, Smoke Density - IEC 61034, LSZH standards compliance: ANSI/TIA-568 C.2, ISO/IEC 11801, IEEE 802.3an, RoHS. Delay Skew should be < 45NS. The outer Cable Diameter should be 7.5 + 2 mm. Cable should have been tested and verified by UL/ ETL etc. complete as required, all complete job and as per direction of Engineer-in-charge. |
| 81 | 1 Run of cable |
| 82 | 2 Run of cable |
| 83 | Supplying and drawing following core Fiber Optic Cable having corrugated steel armoring. The Fiber should be SM Fiber Central -loose tube filled with Thixotropic jelly, duly following Standards: ISO 11801, IEC 60793-1/60794-1-2, ITU-T-REC G.652D and Telecordia GR-20-core, High quality Electro Chromium Coated Corrugated Steel tape (ECCS ) and HDPE- Sheath, Operating ambient Temperature should be – 5 0C to +50 0C and Storage Temperatureshall be – 5 0C to +50 0C, Max Attenuation ± 0.36 (db/ km) at Operational Wavelength 1310 nm and ± 0.22 db / km at Operational Wavelength 1550 nm. type of fiber should be 9/125 / G.652D & Refractive Index should be 1.4670/1.4675. The value for Mode-filed, Cladding Diameter 9.2 ± 0.4 µm and 125 ± 0.7 µm correspondingly. The Dispersion value < 3.5 < 18 ps/nm-km and PMD value < 0.2 ps/km and Cable Cut off wavelength < 1260 nm i/c splicing & marking etc complete as required., all complete job and as per direction of Engineer-in-charge. Single Mode 6 Core Optical fiber cable |
| 84 | Supply and fixing following port Rack Mount loaded LIU with pigtail, Front-mounted cable saddles for jumper management, suitable to manage both splices and terminations, Pre-assembled shelves in multiple configurations, Rubber fiber slotted bracket built-in, metal splice shelf to protect the fibers, 2 fiber spools built-in for 900μm tight buffered fiber storing, Capable of storing up to 3 meters of 900μm tight buffered fiber per adapter, Removable front and rear covers for better access to interior of LIU, Should be Single / Multi mode LC Type fully loaded. Accessory kit consists of cable ties, mounting ear screws, and spiral wrap tube etc complete as required., all complete job and as per direction of Engineer-in-charge. 24 Port LIU |
| 85 | Supplying and fixing Patch Cord of Optical Fiber Multi Mode or Single Mode SC to LC / LC to LC (as required) Fiber Duplex having high precision ceramic ferrule with good concentricity, Fiber corning single mode G652D, Cable Type 2mm with Mechanical specification Apex Offset < 50 µm, Fiber Height + 100 nm, End-face radius of Curvature 7mm < R <25mm, Repeatability < 0.2 db, Working ambient Temperature – 5 0C to +50 0C, Storage Temperature – 10 0C to +50 0C, Length -- 2meter, Type -- LC-LC / SC-LC Duplex etc complete as required., all complete job and as per direction of Engineer-in-charge. |
| 86 | Supplying and fixing 24U Rack with 4 inch Castor wheels and front brake Floor Standing Rack with Main Frame Pillar of 1.25mm Powder Coated CRCA Sheet with removable side panels, L- Shape adjustable Vertical Mounting Rail of 2mm with 'U'Marking completely knocked-down condition (CKD) Shape, fitted with 4 number cooling fans, minimum 5nos two line cable entry/exit provision at top and bottom with rubber protection, Front door 5mm Toughened Glass with MS frame or MS perforated with lock, Rear MS vented or perforated door, Powder coated Color- RAL- 7035 or black, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required, all complete job and as per direction of Engineer-in-charge. |
| 87 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required., all complete job and as per direction of Engineer-in-charge. 1 or 2 Module (75mmX75mm) |
| 88 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. , all complete job and as per direction of Engineer-in-charge. 1 or 2 Module |
| 89 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required., all complete job and as per direction of Engineer-in-charge. USB Charger |
| 90 | Supply of following sizes of 1.1 KV grade multi-core aluminium conductor XLPE / PVC insulated and PVC sheathed armoured power cable conforming to IS 7098 (Part-1) / IS 1554 ( Part -1 ) with upto date amendments as required., all complete job and as per direction of Engineer-in-charge.4 Core x 25 Sqmm |
| 91 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required., all complete job and as per direction of Engineer-in-charge. Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 92 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required., all complete job and as per direction of Engineer-in-charge. 4 X 25 sq. mm (28mm) |
| 93 | Supply, installation, testing and commissioning of 105 mm × 50 mm DLP PVC Trunking of made of high-quality, fire-retardant, self-extinguishing PVC material, complete with base and cover, including all necessary accessories such as couplers, bends, tees, internal & external corners, end caps, joining clips, screws, rawl plugs, etc., as required. The trunking shall be fixed properly on wall/ceiling using suitable fasteners maintaining proper alignment and finish. The item includes cutting, drilling, fixing, dressing of cables inside trunking, and making complete installation as per site requirement and direction of Engineer-in-Charge. |
| 94 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required., all complete job and as per direction of Engineer-in-charge. |
| 95 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required., all complete job and as per direction of Engineer-in-charge. |
| 96 | Brush Less Direct Current (BLDC) Fan without Remote:Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required., all complete job and as per direction of Engineer-in-charge. 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) |
| 97 | LED Panel light 2x2 ft. (System lumen efficacy ≥105 <120 lm/Watt) Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80,UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty.System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm) , all complete job and as per direction of Engineer-in-charge. 36 watt |
| 98 | Supply, Installation, Testing and commissioning of 1 Opal glass with chrome finish base wall lamp Complete with all accessories. (3W, 3000K), all complete job and as per direction of Engineer-in-charge.Make: Jaquar, Model No. CHR-MB160275531B or equi in Philips, Wipro, Crompton Greaves, Havells etc. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
