|
| 1 | TMGO GAS ENGINE OIL 15W40 LONG LIFE (TMGOGEO15W40LL) |
| 2 | SET OF 2 AIR FILTER FOR 497 ( 885409020712 ) |
| 3 | OIL FILTER ELEMENT SPINON BS2/3/4 ( 252718130132 ) |
| 4 | HEAD LAMP LH CLR 1.3PERC LENS 12V BS2/3/ ( 264154400201 ) |
| 5 | LAMP TAIL-LAMP (4 CH.) LH-12V ( 264154430177 ) |
| 6 | LAMP TAIL-LAMP (4 CH.) RH-12V ( 264154430178 ) |
| 7 | BRAKE BOOSTER 9 +8 BS2/3/4 ( 270543500101 ) |
| 8 | BRAKE CHAMBER TYPE 12 WITH ADAPTOR ( 282142100137 ) |
| 9 | ASSY. SIDE IND.RH 12V E CERT BS1/2/3/4/6 ( 264354400138 ) |
| 10 | ASSY. SIDE INDICATOR LH 12V E CERT BS1-6 ( 264354400137 ) |
| 11 | CNG Plug Coil (371114201021 ) |
| 12 | ASSY. CLUTCH COVER 280DIA. ( 272425400216 ) |
| 13 | ASSY. CLUTCH DISC 280 DIA. BS2/3/4/6 ( 272425200216 ) |
| 14 | ASSY. CLUTCH RELEASE BEARING BS1/2/3/4 ( 581225601602 ) |
| 15 | DRIVE SHAFT 7.36 BS2/3/4 ( 251626257904 ) |
| 16 | GEAR 4TH SPEED 7.36 C/S ( 251626305410 ) |
| 17 | KIT GASKET GBS27 ( 885426010709 ) |
| 18 | KIT-SYNCHRO GBS-27 BS2/3/4 ( 885426070709 ) |
| 19 | MAIN SHAFT REMOTE LP/LPT BS2/3/4 ( 251626207905 ) |
| 20 | SHIFTER SLEEVE 1ST/R BS2/3/4 ( 251626204606 ) |
| 21 | SHIFTER SLEEVE BS2/3/4 ( 250826204601 ) |
| 22 | SYNCHRONISING SLEEVE (4TH/5TH) BS2/3/4 ( 251626205430 ) |
| 23 | TAPER ROLLER BRG 30207 BS2/3/4 ( 251626303109 ) |
| 24 | Fixing of CLUTCH R/R and allied works |
| 25 | Fixing of CLUTCH R/R AND GEAR BOX OVERHAULING and allied works |
| 26 | CNG Leakage Checking & repairing |
| 27 | Hydrotesting of Cylinders cleaning of Cylinder & replacement of KIT |
| 28 | SUSPENSION WORK |
| 29 | Complete O/H of Engine Assy. After Removing, Dismantling i/c replacement of piston, crank, piston Ring, Main, Big-end Bearing, Oil Seals, Head Valve Guide, Packing Kit, Engine Oil, Oil Pump, Machinery Job Fuel Pump O/H etc. as required i/c Labour Chrges |
| 30 | Complete O/H of Brakes i/c replacement of brake leather, ratched, oil seal etc., drum turning on leathe machine and wherever it required as per requirement |
| 31 | Complete repair/ replacement and maintenance of wooden floor cabin on TATA 909 chasis by the way of providing wooden plank with minimum 50mm thickness for flooring purpose as per requirement, steel frames with brackets and cross beams, fastners wherever it required, drainage holes, iron angle, etc. other requisite accessories as required complete in all respects i/c labour charges |
| 32 | CABIN TOUCHING AND PAINTING |
| 33 | COMPLETE PAINTING & TOUCHING OF CHASIS FRAME AND ALL WHEEL RIMS AFTER RUBBING WHEREEVER REQUIRED |
| 34 | COMPLETE WASHING AND GREASING ALONG WITH MINOR BUMPER REPARING |
| 35 | COMPLETE YELLOW AND RED TAPE ON SOURROUNDING OF BODY WITH SLOGAN WRITING ON TIPPER BODY & CABIN AT PLACES DESIRED BY DEPARTMENT WITH AUTOMATIVE PAINT |
| 36 | MINOR DENTING WORK ON CABIN AND BODY AT REQUIRED PLACES |
| 37 | MINOR ELECTRICAL WIRE REPAIRING WORK IN ELECTRCAL HARNESS |
| 38 | POLLUTION & FITNESS FEE AS PER ACTUAL BASIS (AS PER RECEIPT SHOWN) PENALTY IF ANY WILL BE BORNE BY DEPARTMENT |
| 39 | PROVISION OF FUEL AND DRIVER FOR RTO PASSING RELATED WORK AFTER TAKING OVER OF VEHICLE FROM DEPARTMENT |
| 40 | RUPD REPAIRING ALONG WITH REQUISITE WELDING WORK AND IRON FRAME RESTRUCTURING AT REQUIRED PLACES |
| 41 | SUPD REPAIRING ON BOTH SIDE ALONG WITH REQUISITE WELDING WORK AND IRON FRAME RESTRUCTURING AT REQUIRED PLACES Please Enable Macros to View BoQ information |
