|
| 1 | M&L for reinforce cement concrete with design Mix M30 using 20 mm graded stone walls, retaining walls, basement walls, ballast walls and the like; any thickness above top of footings; including attached plaster and buttresses complete all as specified and directed. |
| 2 | S&F of TMT Bars 10mm Dia and above, cut to length, bent to shape required including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (Annealed not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 3 | M&L for PCC (1:4:8) type D2 using 40mm graded stone aggregate as in foundation filling complete all as specified and directed. |
| 4 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out soft and loose soil complete all as specified and directed. |
| 5 | SMC Panel Tank 10W x 10B x 4H = 400KL Manhole Panel-GRP Panel with hinges and cover and lockable latch External Ladder (only for 4M and higher tanks)- HDG ladder Internal Ladder (only for 4M and higher tanks)- GRP (fiberglass) Connectors/accessories-inlet 2”, outlet 4”, overflow 2”, drainage 2”(nipples/flanges) & air vent. External support bars-HDG L-bars Internal support tierods-SS-304/GRP tie rods, SS-304 brackets & SS-304 bolting Bottom & Wall panel Connection-HDG Flat Bars Internal Roof support section-FRP/PVC roof supports External Nut Bolts-HDG nut-bolts 8.8 Grade Sealing Tape-High strength food grade PVC foam tape (Saint Gobain, USA) Water Level Gauge-Aluminum Case + PE Clear Tube + Brass Socket System Panels-GRP Wall: 2x1, GRP bottom: 1x1m, GRP roof: 2x1m / 1x1m.Complete all as specified and directed. |
| 6 | Supply and lay pipe galvanized, “Heavy class”, including fittings, 150 mm (6”) dia |
| 7 | Supply and lay pipe galvanized, “Heavy class”, including fittings, 100 mm (4”) dia |
| 8 | Supply Laying and testing ductile Iron Pipe centrifugally cast with spigot and socket ends class K-7 having cement mortar lining with IS: 8329-2000 marked suitable for rubber push on type joints laid in trenches for 150 mm (6\\") dia nominal bore. |
| 9 | Supply Laying and testing ductile Iron Pipe centrifugally cast with spigot and socket ends class K-7 having cement mortar lining with IS: 8329-2000 marked suitable for rubber push on type joints laid in trenches for 100 mm (4\\") dia nominal bore. |
| 10 | Supply and fixing DI Bends, Taper Tees, Pieces( Single or double branch) any type and angle/ radius and straight connecting piecesfor pipe upto 300mm bore complete all as specified and as directed. |
| 11 | Connecting pieces one end flanged and other socket or spigot and bell mouth pieces one end flanged other end tapering as bell mouth |
| 12 | Supply and fix Valve, butterfly conforming to IS 13095,100 mm (4”) dia |
| 13 | Supply and fix Valve, butterfly conforming to IS 13095,150 mm (6”) dia |
| 14 | Supply and fix Valve, reflux, with by-pass Arrangement, 100 mm (4”) dia |
| 15 | Supply and fix Valve, reflux, with by-pass Arrangement, 150 mm (6”) dia |
| 16 | Supply, Install, Testing and Commissioning Stainless Steel Material, Electric driven, 3 Phase, 415 Volts, 50 Hz, Horizontal open well submersible Pump set Power -20 HP ( 15 Kw) , 2850 RPM, Head Range 10-30 Mtr , Discharge Range- 48.5-12 LPS, Suc x Del- 100x100mm (Model No- JOS-2040 20HP 3P Cll) Make- Kirloskar or Equivalent in Texmo. |
| 17 | Supply fixing and connecting Flat Three Core PVC Insulated & PVC Sheathed Industrial copper Cable for Submersible Pump Motors 1100 Volt, 6 Sqmm 3 core conforming to IS 694. Make Havells (WHPNDSKG36X0) or Equivalent |
| 18 | Design, supply, install, testing and commissioning of Factory made, indoor type padestal mounted, totally enclosed, dust and vermin proof, power distribution system, LT cubical panel Board suitable for 400V, 3 phase, 4 wire, 50 Hz, of adequate size with double stud hinged door, front and rear openable along with locking arrangement duly fabricated out of Stainless Steel Sheet rust proof (outerbody and covers) & Inner body/ door covers of sheet not less then 2.0 mm thickness, & internal wiring complete with copper bus bar to be provided through out the length of the panel for incoming, outgoing feeders and electric Meters accommodated in a modular multitier arrangement and interlocked to avoid paralleling, adequate size cable alley comprising and housed in compartments with the Accssories/Fixtures and Fittings mentioned here-in-after including mounting LT panel on PCC Platform all round as recommended by OEM complete . |
| 19 | The following accessories / Fittings and fixtures are required to be fitted in-housed in the LT Panel Board :- |
| 20 | (A) INCOMING |
| 21 | (a) 400 Amps rated copper bus bar TPN duly insulated with coloured PVC Sleeve as per Standard Colour Code and rigidly mounted on Bakelite /DMC insulator Bus bar support (Square / round ) insulators of suitable size and good insulation resistance. |
| 22 | (i) MCCB 200 4 Pole 415 V 50 KA- 01 Nos Adjustable Thermal & Adjustable Magnetic (Main Incomer) |
| 23 | (ii) Multi Function Meter Make L&T Cat No-WL440511OOOO-01 |
| 24 | (iii) Phase indicator lamps (RYB) - 01 set |
| 25 | (B) OUTGOING |
| 26 | (c) MCCB 4 Pole 63 Amps , Rotary Handle , adjustable Thermal Magnetic relay breaking capacity 25 kA 415 Volts Ics=100% Icu ( OUTGOING)- 03 No |
| 27 | (d) Inbuilt automatic Star Delta Starter with suitable relay range for 15 HP open well submersible motor including Auto Timer & Single Phase Preventer, Digitial Ammeter with In built selector Switch -0-60 Amps , Indicating Lamps (LED ) with bakelite Fuse showing R-Y-B Phase , and ON- OFF Push button (green & red colour) etc complete.-03 Nos |
| 28 | Excavation in Trenches not exc 1.50 Metre wide and not exc 1.50 Metre depth for laying of UG Cable etc and getting out in Soft/Loose Soil, complete all as specified and as directed. |
| 29 | Returning, Filling in including Spreading, Leveling, Watering and Well Ramming in layers not exc. 25 Cm thick in Soils, complete all as specified and as directed. |
| 30 | Removing Surplus excavated Soil to a distance not exc 50.00 Metre away and depositing where directed at a level not exc 1.50 Metre above the Starting Point, complete all as specified and as directed. |
| 31 | Supply & laying LT Aluminium Conductor Power Cables, Stranded Conductor, XLPE Insulated, Cores Laid Up, PVC Innersheathed, Armoured galvanised steel strip, Extruded PVC Type ST2 Outer Sheathed, 1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments. cross-sectional area 50 Sqmm 3½ Core, passing in HDPE Pipe laid in trenches/ fixing on surface of Wall in cable tray securing with GI Cable clamps including Brass Cable Glands at termination end points Mild Steel Flat Iron Clampsof adequate size, etc. and Testing complete all as specified and as directed. |
| 32 | Supply and laying corrosion- resistant, non-porous, Double wall corrugated high-density polyethylene (HDPE) Pipe of Size 63 mm, (2 \\"), laid in trenches along with accessories complete for electrical usage as in cable protection pipe to protect cable from external physical damage all as specified and as directed. |
| 33 | Material & labour for Earthing using galvanised iron earth plate electrode of size 60cm X 60cm X 6mm thick burried directly in ground vertically at a depth not less than 2.25 mtr below normal ground level with top edge of earth plate at a depth not less than 1.5 mtr below normal ground level, earth plate surrounded from all sides by 15 cm thick and packed layer of charcoal dust and common salt filling in alternate layers including refilling with good earth as specified and electrode connections by using galvanised iron strip of size 32x6mm by means of bolts, nuts, check nuts and washers made of GI and provision of GI pipe medium grade 40 mm dia for protection of earthing lead and 20mm dia for watering arrangement including funnel, wire mesh, CI pit cover and PCC chamber pit with PCC 1:2:4 type B-2 (including necessary excavation and earth work disposal of surplus soil to a distance not exceeding 50 mtr all as specified and shown on plate No 5 of SSR Part-I 2009. |
| 34 | Deduct Credit for Demolished/ Dismantled material Rs. (-) 0.00 (Minus) as listed in Schedule of Credit. Note 1:- Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'Note 2:- The tenderer must keep in mind when quoting rates against items out in multiple store house having height 4 mts to 7 mts. Necessary scaffolding and saftey measures required during execution of work are including in this items. Please Enable Macros to View BoQ information |
