|
| 1 | Taking down chowkats or frames with shutters (without taking off the shutters from the frame) of area not exc. 1.50 Sqm each complete all as specified and as directed. |
| 2 | All as per Serial item No. 1 here-in-before but area exc.1.50 Sqm but not exc. 4.00sqm each. |
| 3 | Taking down shutters of any description n. exc. 1.00 Sqm each complete all as specified and as directed. |
| 4 | All as per Serial item No. 3 here-in-before but exc.1.00 Sqm but not exc. 2.00 sqm each. |
| 5 | M&L for well seasoned 2nd class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. |
| 6 | M&L for 30mm thick second class hard wood, glazed and skeleton shutters, open rebated and prepare to received glass, gauge, etc. divided into squares with plain chamfered or rounded mitred and sash bars any number, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section-8 Clause 8.24 (a) and fitted to wooden chowkhat complete all as specified and as directed. |
| 7 | M&L for 35mm thick second class hard wood, glazed and skeleton shutters, open rebated and prepare to received glass, gauge, etc. divided into squares with plain chamfered or rounded mitred and without sash bars, any number edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section-8, Clause 8.24 (a) and fitted to wooden chowkhat complete all as specified and as directed. |
| 8 | M&L for 30mm thick second class hard wood factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 9 | S&F factory made 35mm thick 2nd class hard wood plain framed paneled shutter (two panel) with locking rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneered on both face. The size of rail and style as per IS : 1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 10 | M&L for 25mm thick flush shutters, solid core construction with block board core and both faces is covered with decorative face veener with lipping frame to match complete all as specified and as directed. |
| 11 | S&F PVC Solid door frame of 50x47mm size made out of 5.0mm plain colour PVC sheet reinforced with mild steel square tube as specified and as per manufacture’s instructions complete all as specified and as directed. |
| 12 | S&F 30mm thick factory made solid panel PVC door shutter (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded palin colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on on either side and as gap insert for top rail and bottom rail. Panellining of plain colour PVC sheet to be fitted in the MS frame welded /sealded to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing complete all as specified and as directed. |
| 13 | M&L for applying two coats of synthetic enamel paint over one coat of pink primer after preparation of new wooden surfaces of any description, not otherwise described for over 10cm width or girth complete all as specified and as directed. |
| 14 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed. |
| 15 | S&F 4mm thick sheet glass ordinary quality, fixed with oil putty or wooden bead in square n. exc. 0.5 Sqm in each pane complete all as specified and as directed. |
| 16 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including all cutting, wastage, etc complete all as specified and as directed. |
| 17 | S&F as in repairs for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including beading complete all as specified and as directed. |
| 18 | S&F mild steel work flat iron as in bands, straps, hold fast, plain angle cleat, wall tie, etc. and similar small articles conforming conforming to Fe 410-0 or Fe-310-0 compelete all as specified and as directed. |
| 19 | S&F chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, 'L' or 'T' section supports for shelves, etc. and similar articles conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 20 | Cutting holes in brick walls in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as required depth of embedded portion of holdfasts, exc. half brick and not exc. one brick thick complete all as specified and as directed |
| 21 | S&F 75mm long butt hinges \\"medium weight\\" cold rolled mild steel complete all as specified and as directed. |
| 22 | All as per Serial item No.21 here-in-before but 100mm long. |
| 23 | S&F 100mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed. |
| 24 | All as per Serial item No.23 here-in-before but of 150mm long. |
| 25 | S&F 150mm size extruded aluminium alloy handle, fabricated type anodised complete all as specified and as directed. |
| 26 | All as per Serial item No.25 here-in-before but of size 100mm. |
| 27 | S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed. |
| 28 | S&F for 100mm long stainless steel butt hinges complete all as specified and as directed. |
| 29 | S&F as in repairs 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 30 | S&F as in repairs 300mm long aluminium alloy, anodised, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed. |
| 31 | S&F as in repairs 75mm long butt hinges \\"medium weight\\" cold rolled mild steel complete all as specified and as directed. |
| 32 | All as per Serial item No. 21 here-in-before but 100mm long. |
| 33 | S&F as inrepairs 150mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed. |
| 34 | S&F as in repairs 150mm size extruded aluminium alloy handle, fabricated type anodised complete all as specified and as directed. |
| 35 | S&F as in repairs hydraulically regulated door closer aluminium body, heavy duty designation No.3, universal type, suitable for door shutter weighing between 61 Kg to 80 Kg complete all as specified and as directed. |
| 36 | S&F as in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 37 | S&F as in repairs of aluminium door lock and key assembly (dead lock)/ mortice lock, vertical type size 100mm of any description complete all as specified and as directed. |
| 38 | S&F for powder coated aluminium anodised frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 39 | S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges (150mm size - 03 Nos.), anodised aluminum snap beading screws etc. complete all as specified and as directed. |
| 40 | S&F for powder coated aluminium window and ventilator glazed/gauged shutters sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified and as directed. |
| 41 | S&F aluminium DECO grill of standard section, type 'A' diagonal, with 'U' rail necessary jointing cleats, screws fixed with frame etc. complete all as specified and as directed. |
| 42 | S&F 4.8mm thick sheet glass ordinary quality, fixed with oil putty or wooden bead in square n. exc. 0.5 Sqm in each pane complete all as specified and as directed. |
| 43 | M&L for 9mm thick veneered decorative plywood, Grade 1(with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work complete all as specified and as directed. |
| 44 | Dismantling aluminium door shutter including assembly exceeding 1.00 Sqm but not exceeding 2.00 Sqm and repair for proper functioning by adjusting moving assembly of floor spring, pivot, hinges etc and re-erecting the shutter including straightening, cutting, tightening of door shutter and making easy movement of the shutter including replacing of mortice lock door, door handles, rubber glass beading complete all as specified and as directed.Note : Floor springs & mortice locks are to be measured and paid separately here-in-after. |
| 45 | S&F aluminium partition with powder coated aluminium frame work with standard sections of medium size and weight not less than 1.00 Kg/Rm and confirming to catalogue of Jindal or equivalent. The partition shall be fixed with 12mm thick prelaminated particle board with decorative lamination on both sides of approved colour, in bottom panel and with 5.5mm thick glass of approved make in top panel. The frame shall be with one or more rebates including joining cleats, glazing clips, standard rubber beading, etc., including fixing properly at floor level and wall/column faces properly after taking down partitions of any descriptions and other similar works complete all as specified and as directed . |
| 46 | Dismantling wall panelling / ceiling boards (fibre, pulf, insulation, etc.) wall or insulation boards / slabs / blankets, any thickness including cover fillets and removing unserviceable material from the site of work complete all as specified and as directed. |
| 47 | S&F GI snap grid frame work for false ceiling of grid size 605mmx605mm as specified in clause 10.38 of MES Schedule Part-I complete all as specified and as directed. |
| 48 | S&F hangers 4mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size, 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and as directed. |
| 49 | S&F 4mm thick high pressure steam cured non asbestos fibre cement designer ceiling board tiles of size to suit grid mould (600mm x 600mm) and fixing in grid mould as per manufacturer's instructions complete all as specified and as directed. |
| 50 | Dismantling timber scantling, 40 sq.cm and over in section, in any position, in unframed work complete all as specified and as directed. |
| 51 | Dismantling timber fillets, rails, posts, rafter purlin etc. under 40 Sq.cm in section in any position as in unframed work complete all as specified and as directed. |
| 52 | M&L for 2nd class hard wood in scantling fixed as in timber (clean sawn) complete all as specified and as directed. |
| 53 | M&L for 4mm thick plywood grade BWR, type BB fixed to timber frame work with screw complete all as specified and as directed. |
| 54 | M&L for 2nd class hard wood plain fillets, square or rectangular or triangular in section, wrought, sectional area exc. 6.0 sq.cm but not exc. 13.0 sq.cm (as in cover fillets) screwed with nails or brads complete all as specified and as directed. |
| 55 | M&L for 2nd class hard wood plain fillets, square rectangular or triangular in section, clean sawn of sectional area not exc. 3.0 sq.cm screwed with nails complete all as specified and as directed. |
| 56 | M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specifications and drawing complete all as specified and as directed. |
| 57 | M&L for 5mm thick colour PVC prelam sheet in strips and channel feathered at the edges for fixing on solid PVC wall lining, insulated PVC wall lining and solid PVC partitions inclusive of solvent cement and fixing at site complete all as specified and as directed. |
| 58 | S&F as in repairs 20mm dia Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers, etc. complete all as specified and as directed. |
| 59 | Taking down cement plaster of any description on brick walls or on concrete surfaces including raking out Joints, hacking for key, scrubbing down with water, etc. and removing the same from the site(s) complete all as specified and as directed. |
| 60 | M&L for 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces finishing the plastered surfaces fair and even without using extra cement complete all as specified and as directed. |
| 61 | M&L for 15mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces mixed with water proofing compound (WPC) as per manufacturer's instructions, finishing the plastered surfaces fair and even without using extra cement complete all as specified and as directed.Note : WPC shall be measured and paid separately. |
| 62 | M&L for 5mm thick rendering in cement mortar (1:3) on fair faces of concrete surfaces of ceiling, finishing even and smooth without using extra cement complete all as specified and as directed. |
| 63 | M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and as directed. |
| 64 | M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed. |
| 65 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over and including one coat of primer complete all as specified and as directed. |
| 66 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed. |
| 67 | M&L for preparation newly plastered surfaces of wall or concrete and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10sqm over new surfaces complete all as specified and as directed. |
| 68 | S&F in repairs for 140mm length floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 69 | S&F for door seal of any description complete all as specified and as directed. |
| 70 | Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed. |
| 71 | M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing confirming Fe-410W (Gde E-250) quality 'A' complete all as specified and as directed. |
| 72 | S&F 1.60mm thick mild steel, plain, black sheet in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as per specified and as directed. |
| 73 | M&L for preparation of new steel surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint (first grade quality) over and including one coat of red oxide zinc chrome primer complete all as specified and as directed . |
| 74 | Taking down plastering on lathing (other than wire-netting), without removing lathing, in cement lime or cement mortar (one side only measured in cases where both sides are plastered) complete all as specified and as directed. |
| 75 | M&L for 20mm thick rendering on fair faces of brick work or concrete surfaces of walls other than fair faces or one side in lathing in cement mortar (1:4) and finished even and smooth without using extra cement complete all as specified and as directed. |
| 76 | M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces of walls other than fair faces or one side in lathing in cement mortar (1:6) and finished even and smooth without using extra cement complete all as specified and as directed. |
| 77 | S&F as in repairs in GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified and as directed. |
| 78 | Demolition of brick work, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed and precast concrete articles, etc. complete all as specified and as directed. |
| 79 | M&L for brickwork with sub class ‘B’ bricks (old size first quality), straight or curved on plan exc. 6m mean radius, built in cement motar (1:6) complete all as specified and as directed. |
| 80 | M&L for brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement motar (1:6) complete all as specified and as directed. |
| 81 | Dismantling boarding, any description, fixed in any position with screws complete all as specified and as directed. |
| 82 | S&F 18/19mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations and other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed. |
| 83 | S&F for 30mm width continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and as directed. |
| 84 | S&F 100mm long hasp and staple, aluminium anodised including bolt to hinge plate and fixed with screws complete all as specified and as directed. |
| 85 | M&L for 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn of sectional area not exc. 25 sq.cm screwed with screws complete all as specified and as directed. |
| 86 | M&L for 2nd class hard wood plain fillets, square rectangular or triangular in section, clean sawn of sectional area not exc. 13 sq.cm screwed with screws complete all as specified and as directed. |
| 87 | Supply only liquid water proofing compound conforming to IS Code of approved make complete all as specified and as directed. NOTE:- The contract sum shall be derieved by deducting the amount shown in Schedule of Credit attached to this tender from total amount of Schedule 'A'/BOQ. Please Enable Macros to View BoQ information |
