|
| 1 | Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified and directed. |
| 2 | M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed. |
| 3 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 4 | M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6) finished even & smooth (without using extra lime or cement) complete all as specified and directed. |
| 5 | M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished even & smooth with 3% wpc (without using extra lime or cement) complete all as specified and directed. |
| 6 | M&L Rendering Sand faced plaster 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) with 3% wpc and top surface to be finished with a sponge or wooden float in circular motion to achieve sand faced texture complete all as specified and directed. |
| 7 | Supply only integral water proofing compound complete all as specified and directed. |
| 8 | M&L for preparing of previously untreated surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed. |
| 9 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 10 | M&L for preparation of exterior floor/ paver/ chequered tile surfaces and applying a coat of glossy finish floor coat exterior emulsion paint of floor to match with existing colour or any other selected colour by using brush/ hand roller etc complete all as specified and directed by Engr-in-Charge. |
| 11 | S&F in repair toughened glass of thickness 12mm of area n. exc 2.50 Sqm cut to shape reqiured with rounded edges fixed with chromium plated screws to floors and walls including necessary fittings complete all as specified and directed by Engr-In-Charge. |
| 12 | S&F in repairs 20 mm thick Lakha Red stone to match with existing design with backing coat in CM 1:3 , including all moulding and taking down complete all as specified and directed. |
| 13 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) or chequred or interlocking tiles removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 14 | M&L for Glazed ceramic coloured tiles in vertical surfaces 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick backing coat in cement mortar 1:4, complete all as specified and directed. |
| 15 | M&L for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 SQM but not exceeding 0.18 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match,laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 16 | M&L for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 SQM but not exceeding 0.11 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match,laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 17 | M&L for Light shade Vitrified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor etc.laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 18 | M&L for Dark shade Vitrified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor etc.laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 19 | M&L for Light shade Vitrified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match but on vertical surfaces/skirting laid over and including 10mm thick backing coat in cement mortar 1:4 complete all as specified and directed. |
| 20 | M&L for double charged Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 SQM not exceeding 3.00 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match premium quality as in floor etc and including screed bed 20mm thick in CM (1:6) complete all as specified and directed. |
| 21 | Dismantling of stone slabs and tiles of any description, laid bedded and pointed in any mortar complete all as specified and directed. |
| 22 | M&L for 16-18 mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over and including cement screed in CM 1:4, 15mm thick and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 23 | M&L for 16-18 mm thick Granite (of any type) tiles machine cut, laid over and including cement screed in CM 1:4, 15mm thick and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 24 | M & L Chequred cement concrete tiles 20cm x20cmx 25mm thick with grey cement and pigment , set jointed in neat cement slurry complete all as specified as directed. |
| 25 | M&L for 20 mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed. |
| 26 | M&L for 75mm thick Cement concrete Type D2 1:4:8 (40 mm graded graded aggregate) as in floor finishes and pavings complete all as specified and directed. |
| 27 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 28 | Material and Labour for Hardcore of broken stones of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 29 | M&L for scrafying or picking consolidated hardcore of thickness n exc 150mm and removing outside MD land complete all as specified and directed. |
| 30 | M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 31 | Dismantling & refixing for 60mm Machine pressed precast conctete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade after rectification of sub-base complete all as specified and directed. |
| 32 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 33 | Demolition of PCC of any description & in any position not otherwise specifically provided for (unreinforced) complete all as specified and directed. |
| 34 | M&L for 75mm thick PCC 1:3:6 Type C2 as in repairs of plinth complete all as specified and directed. |
| 35 | M&L 40mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate as in sub floors, floor bases,or for water tank bases on slab and paving etc complete Finished even & smooth using extra cement complete all as specified and directed. |
| 36 | M&L for Anti Termite Treatment for the wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. |
| 37 | M&L for Anti Termite treatment of soil under existing floors using emulsion @ 1 litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2( 1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed. |
| 38 | S&F in repairs Vitreous China urinals 375mm x 390mm x 590mm snow white in colour,complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including brass screws, pointing around urinal back in cement including fitting such as spreader and outlet discharge pipe, coupling complete all as specified and directed.Make- CERA S4020112 or equivalent as per list of make / approved by GE |
| 39 | S&F in repair Cast iron 75mm bore cowls complete all as specified and directed. |
| 40 | S&F in repair Cast iron 100mm bore cowls complete all as specified and directed. |
| 41 | S&F in repairs PVC (SWR)110mm bore pipes, single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 42 | S&F in repairs PVC(SWR) bends 110mm bore any radius complete all as specified and directed. |
| 43 | S&F in repairs PVC trap 125/110mm complete all as specified and directed. |
| 44 | S & F in repairs PVC 160mm dia rainwater pipes including all fitting such as bends and coupler upto G+10 building using all necessary scafollding and framework complete all as specified and directed. |
| 45 | S&F in repairs vitreous china white wash hand basin oval type over/under counterwash basin 560x470mm complete all as specified and directedMake: CERA Cat No.S2030104 or techno commercially equivalent as approved by GE |
| 46 | S&F in repairs 32mm brass chromium plated waste coupling for wash hand basin complete all as specified and directed. |
| 47 | S&F in repairs Vitreous China squatting pan of pattern `long pan', size 580mm white with `p' or `S' trap, front or back inlet & foot rests, any pattern (exclusing flushing cistern & flush pipe) complete all as specified and directed.Make: CERA S3010109 or equivalent as per list of make / approved by GE |
| 48 | S&F in repairs grating doom 150x150mm of brass chromium plated complete all as specified and directed. |
| 49 | Taking up or down steel tubing pipe and connections 15mm bore complete all as specified and directed. |
| 50 | Supply and fixing 15mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed. |
| 51 | Supplying & Fix in repair 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fitting and accessories complete fixed to walls / ceiling or laid to floors complete all as specified and directed. |
| 52 | Refixing old steel tubing & connections in new or old position (Walls, ceiling, floors, etc.) of 15mm bore complete all as specified and directed. |
| 53 | S & F in repairs Bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe complete all as specified and directed.Make:- CERA F1015151or techno commercially equivalent as approved by GE |
| 54 | S&F in repairs Pillar taps with swan neck spout, cast copper alloy, with capstan heads, chromium platedscrewed down highpressure, with or without lettered 'Hot' or 'Cold' withlong screwedshanks and fly-nuts,screwed for iron pipe and fixed to 15mm bore pipe complete all as specified and directed.Make:- CERA F1015301or equivalent as per list of make / approved by GE |
| 55 | S&F in repairs Pillar taps with Aquisense Sensor, cast copper alloy, with capstan heads, chromium platedscrewed down highpressure, with orwithout lettered 'Hot' or 'Cold' withlong screwedshanks and fly-nuts,screwed for iron pipe and fixed to 15mm bore pipe complete all as specified and directed.Make:- Jaquar Cat Part no SNR-51011 or equivalent as per list of make / approved by GE |
| 56 | S&F in repairs sensor, for urinal chromium platedscrewed down highpressure, with or without lettered screwedshanks and fly-nuts,screwed for iron pipe and fixed to 15mm bore pipe complete all as specified and directed. |
| 57 | S&F in repairs 15 mm size stop valve or angle valve cast copper alloy, chromioum plated fancy type, screwed down, high pressure with capston head, screwed both ends for iron pipe or for union complete all as specified and directed. |
| 58 | S&F in repairs 10 litres capacity PVC valveless symphonic action type, flushing cistern, low level, white, with inlet, ball valve float handle including brackets complete all as specified and directed.Make:- Cera B1010113 or equivalent as per list of make / approved by GE |
| 59 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed. |
| 60 | S&F in repairs 32mm PVC waste pipe for wash hand basin/urinal/sink 600mm long complete all as specified and directed. |
| 61 | S & F in repair Brass chromium plated 32 mm bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed. |
| 62 | S&F in repairs sinks with drainage board made of high grade stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 63 | S & F in repairs hand shower (Health Faucet) brass chromium plated with 8 mm Dia & 1 meter long flexible tube and wall hook complete all as specified and directed.Make:- CERA F 8030105 AB or equivalent as per list of make / approved by GE |
| 64 | S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white with seat cover (excluding flushing cistern and flush pipe) complete all as specified and directed.Make:- CERA S1053121 or equivalent as per list of make / approved by GE |
| 65 | S&F in repair single piece WC with UF soft close seat cover, hinges, dual flush, cistern fittings, fixing accessories and accessories set of size 360mm x730mm x 740mm, with 'S' trap 300mm complete all as specified and directed.(Make : Jaquar Cat part No SLS-WHT-6851S300UF or equivalent as per list of make / approved by GE |
| 66 | S & F in repairs one piece EWC with duroplast slim soft close seat cover with hinges and accessories set of size Camper 640 x 360 x 765 mm s trap-220 mm complete all as specified and directed. Make: Cera Cat No.S1013206 or techno commercially equivalent as approved by GENote : Rate of Flushing cistern and other items used for fixing of EWC will be included in Quated rate. |
| 67 | S & F in repairs metropole flush valve dual flow of 32mm size concealed body type with exposed cut off provision & round flange complete all as specified and directed.Makr- Jaquar FLV-1085N or equivalent as per list of make / approved by GE |
| 68 | S&F in repairs 500 ltrs capacity ISI marked rotational moulded triple layer polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete including taking down of existing tank complete all as specified and directed by Engineer-in-Charge |
| 69 | S&F in repairs 1000 ltrs capacity ISI marked rotational moulded triple layer polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete including taking down of existing tank complete all as specified and directed by Engineer-in-Charge. |
| 70 | S&F in repairs 2000 ltrs capacity ISI marked rotational moulded triple layer polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete including taking down of existing tank complete all as specified and directed by Engineer-in-Charge. |
| 71 | S&F in repairs polyethylene water tank cover with hinges suitable up to 2000 Ltrs tanks, including taking down old water tank cover complete all as specified and directed. |
| 72 | Supply and Fixing in repairs Ball valve up to 40mm bore in repairs complete all as specified and directed. |
| 73 | S&F in repairs plastic water closet seat cover, white or black colour closed pattern with flat bottom including taking down old seat cover complete all as specified and as directed. |
| 74 | S&F in repair aluminium anodised plated Tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 75 | S&F in repairs Toilet paper holder complete all as specified and directed.Make Cera: F5002110 or techno commercially equivalent as approved by GE |
| 76 | Taking down any type door and Resecuring or easing & adjusting and Refixing in same opening for shutter n. exc 2 Sqm complete all as specified and directed. |
| 77 | S&F in repairs 5.50mm thick sheet glass ordinary quality alongwith EPDM rubber all around glass edges n exc 0.5 Sqm in each pane complete all as specified and directed. |
| 78 | S & F in repairs for aluminium anodised barrel tower bolt 200mm long extruded section complete all as specified and directed. |
| 79 | All as per item No 78 here in before but but 150mm complete all as specified and directed. |
| 80 | S&F in repairs Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 81 | S&F in repairs stainless steel butt hinges medium weight cold rolled of size 100mm by fixing to existing frame complete all as specified and directed. |
| 82 | Supply & fix in repair in position aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) two track window ( two shutters glazed ) with frame, glazed with 4 mm thick tinted glass including rubber bead joining cleat for fixing in position, concealed type lock for all two shutter, PVC roller etc complete all as specified and directed. |
| 83 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 84 | S & F in repair aluminium powder coated ) min thickness of powder coating 50 micron of approved colour) ventilator , partially glazed and partially louvers , outer frame and mullion fafricated with aluminium section of size 82.50mm x 38mm x 1.70mm thick (Cat No. 20036 Jindal or equivalent) half portion glazed with 3mm thick froasted glass including rubber bedding and glazing clip half portion louveres of 80mm wide and 4mm thick frosted glass including aluminium louver patti with fitting & fixture and fixed in position complete all as specified and directed. |
| 85 | S&F in repair aluminium anodized door shutter, aluminium section weighing not less than 0.55Kg/m including necessary jointing cleats, glazing clips rubber neoprene packing including aluminium anodized snap beading screw 5mm thick glass and 12mm thick prelaminated particle board with decorative choice lamination on both sides etc. complete all as specified and directed.(a) 150mm handle - 02 Nos(b) Mortice lock in built 3 lever - 01 No in each shutter |
| 86 | S&F in repair aluminium sections suitable for doors, windows and ventilators for repairs to damaged part complete all as specified and directed. |
| 87 | S & F in repair 4 levers Brass Mortice lock vertical type, size 100mm complete all as specified and directed. |
| 88 | S&F in repair door closer hydraulically Aluminium extruded section body regulated designation No 3 universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 89 | S&F in repairs 600x 450 mm beveled edge mirror of selected quality of glass, mounted on 6 mm thick AC bldg board or commercial ply wood and fixed to wooded plug with chromium plated brass screw and cup washer complete all as specified and directed. |
| 90 | Taking down shutters of any description exc. 1.00 sq. m and n. exc. 2.00 sqm each complete all as specified and directed. |
| 91 | S&F 35 mm thick 1st class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.NOTE: Glass will be measured and paid separately |
| 92 | M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed. |
| 93 | M & L for 35 mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides both face is covered with decorative face veneer with lipping/frame to match with vision panels or peepholes, square or rectangular including lipping (supplying and fixing of glass measured separately) and fixed to chowkhats complete all as specified and directed. |
| 94 | M & L for taking down Chowkhats or frames n exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 95 | M & L for taking down Chowkhats or frames exc. 1.5 sq. m and n. exc. 4 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 96 | M & L for 2nd class Hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 97 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 98 | S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC Sheet rainforced with MS square tube complete all as specified and directed. |
| 99 | S&F in repairs Stainless Steel handles 100mm size, Fancy type for wall mounted cupboard complete all as specified and directed. |
| 100 | S&F in repairs Aluminium handles 150mm size, cast type, with brass coating complete all as specified and directed. |
| 101 | M & L for 18/19 mm thick Prelaminated particle board in repairs, exterior grade, prelaminated both side decorative choice lamination fixed with aluminium frame work complete all as specified and directed. |
| 102 | S&F in repair Cylindrical Lock lock 6 levers best quality with S S and duplicate keys for built in Wooden door complete all as specified and directed. |
| 103 | S & F in repair for sliding lock of aluminum window complete all as specified and directed. |
| 104 | S & F in repairs Magnetic catches of size n exc 50mm x 15mm , complete all as specified and directed. |
| 105 | S&F in repair wall mounted LED illuminated mirror of comprising 4- 6 mm thick high quality moisture resistant mirror with polished edges. The mirror shall be provided with in built energy efficient LED strip lighting Cool light, warm light and neutral white as specified with uniform diffused illumination complete all as specified and directed by Engr-in-charge. |
| 106 | Cleaning and removing all scale and dirt, etc. from 500 litres tanks and from mouth of circulating pipes,.etc including disconnecting existing tanks, setting aside (or lowering if required) for cleaning etc. and reconnecting and refixing in position complete all as specified and directed. |
| 107 | Dismantling of wall/ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 108 | M&L for Anodised aluminium snap grid frame work for false ceiling Size of grid 605 x 605mm complete all as specified and directed. |
| 109 | M&L for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete complete all as specified and directed. |
| 110 | Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed. |
| 111 | M&L for Seamless calcium silicate ceiling 12 mm thick made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish complete all as specified and directed. (Frame work for ceiling shall be measured and paid separately) |
| 112 | S & F in repair position glass bricks of approved make of size 195X195X80mm with white cement (1:1) at all heights, with necessary PVC frame etc complete all as specified and directed by Engr-in-charge. |
| 113 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 114 | S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 115 | Dismantling expanded metal/weld mesh, any thickness or mesh, fixed with steel or wood fillets, if any n exc 4 kg per sqm complete all as specified and directed. |
| 116 | S & F Welded steel wire fabric n exc 4 kg per sqm supplied and fixed complete to wood or steel members complete all as specified and directed. |
| 117 | M&L for preparing new or previously untreated surfaces of steel and iron surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer on steel surfaces complete all as specified and directed. |
| 118 | S & F in repairs Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 119 | S & F in repairs for Aluminium composite Panel (ACP) sheet 3mm thick of selected quality fixed to wooden or particle or plywood complete all as specified and directed. |
| 120 | S & F in repairs Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 121 | S & F in repairs 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 122 | S&F in repairs of wooden acoustic door with teak wood frame of 140 x 90 mm with fire and smoke strip of 10 mm x 4 mm and acoustic hollow EDPM gasket thickness of door shutter 76 mm having infill of density of 48 Kg per cum glass wool sand witched by 12 mm fire rated board and cladded with 6 mm thick commercial ply facing and 3 mm rubber sheet finished with both side 1 mm mica laminate and 25 mm thick teak wood frame around the door pannel including 450 mm long SS handle, door closure and cylindrical lock including taking down old shutter complete all as specified and directed. |
| 123 | M&L for servicing of automatic glass sliding door of exc 6 sqm and n exc 8 sqm area including greasing, oiling and changing of damaged/ worn out parts and checking of sensors for smooth and noiseless functioning complete all as specified and directed. |
| 124 | Supply and fixing in repairs of door closer hydraulically of wooden acoustic door, suitable for door shutter of1500 to 2000 mm in width and of weight between 100 to 150 kg and fixed complete all as specified and directed. |
| 125 | Supply and fixing in repairs 450mm long Brass door handle including taking down old handles complete all as specified and directed. |
| 126 | S&F in repair for 300mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed in repairs complete all as specified and directed. |
| 127 | Supply and fixing frosted 5.5mm thick glass for aluminium doors with EPDM rubber gasket all round including hacking out old broken glass and removing outside MD land complete all as specified and directed. |
| 128 | S&F in repair frosted glass film of 50 micron complete all as specified and directed. |
| 129 | Supply and fixing in repair solar control film of 50 micron complete all as specified and directed. |
| 130 | Checking of joinery (wooden/steel) iron/aluminium mongery, pelmet box, curtain rod,door spring, hydraulic door closeretc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, drilling nails , minor adjustement of joinery, door etc. including petty repairs materials like screw/nails, plug etc. to make it functional complete all as specified and as directed.Note:-(i) Any items required to be replaced shall be paid under respective items.(ii) Contractor or his authorised representative shall collect such type of complaints from AGE B/R Chiloda complaint cell at 9:00 AM daily except sundays & Holidays. No extra payment shall be made on account of collection of complaint.(iii) Complaints must be completed within 24 hrs without fail otherwise recovery shall be made double than the market rate to the Contractor. |
| 131 | Checking of floor, plinth, plaster etc requiring masonary work and carrying out minor repairs such as edges patches n exc 0.5 sqm etc. including pettyrepairs material like sand , cement and aggregate to make it functional complete all as specified and as directed. Note:-(i) Any items required to be replaced shall be paid under respective items.(ii) Contractor or his authorised representative shall collect such type of complaints from AGE B/R Chiloda complaint cell at 9:00 AM daily except sundays & Holidays. No extra payment shall be made on account of collection of complaint.(iii) Complaints must be completed within 24 hrs without fail otherwise recovery shall be made double than the market rate to the Contractor. |
| 132 | Checking and attending to water leakage from taps, flushing cisterns, wash hand basins and other sanitary fitting / fixtures and any obstruction to water supply, requiring plumber work and carry out minor repairs such as replacement of washers , checknuts, tightening of fitting of flushing cistern etc including petty materials like washers of all sizes, thread (Shoot), M-seal, screws, nails to make water supply / plumbing lines functional and leak proof complete all as specified and directed.Note:- (i) Any items required to be replaced shall be paid under respective items.(ii) Contractor or his authorised representative shall collect such type of complaints from AGE B/R Chiloda complaint cell at 9:00 AM daily except sundays & Holidays. No extra payment shall be made on account of collection of complaint.(iii) Complaints must be completed within 24 hrs without fail otherwise recovery shall be made double than the market rate to the Contractor. |
| 133 | M & L for sealing gaps between window and wall with silicon sealant of gap n. exc. 5mm all around the periphery of window having area n. exc. 2 sqm complete all as specified and directed. |
| 134 | S & F in repairs for 18mm thick PVC celuka ply board cut to shape required and fixed with screws and glue as in cupboards complete all as specified and directed. |
| 135 | S & F in repairs for L type SS hinges, 100mm long fixed to frame or chowkats complete all as specified and directed. |
| 136 | S & F in repairs Plywood, grade BWR, type BB,12mm thick fixed with screws to timber frame work complete all as specified and directed. |
| 137 | S & F in repairs Plywood, grade BWR, type BB,18mm thick fixed with screws to timber frame work complete all as specified and directed. |
| 138 | S & F in repair Decorative laminate 0.9mm thick type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed. |
| 139 | S & F in repairs mirror of area exc 0.5 sqm bevelled edge over table top/under counter washbasin of selected quality and glass monuted 6mm thick edge cut and fixed to wall with nylone sleeve cadmium plated screw complete all as specified and directed. |
| 140 | Demolition and Taking down existing water proofing treatement with base of cement concrete of any description and any thickness and removing debris (demolished materials) outside MD land and M&L for plaster/screed bed in CM (1:4) 15 mm thick over RCC roof / brick wall mixed with water proofing compound @ 3% by weight of cement and preparing the surface to receive WPT treatment, applying a coat of oil based bitumen primer confirming to IS No. 3384 - 1986 @ 0.30 litrs/ Sqm and then laying APP modified mebrance 3mm thick with non woven polyester reinforcement membrane (3.50 Kg/Sqm) (centre core) by torch application method over primed surfaces complete all as specified and directed by Engineer-in-Charge. (Note :- WPC to be incl in the rate) |
| 141 | Demolition and Taking down existing PCC tiles with water proofing treatement with base of cement concrete of any description and any thickness and removing debris (demolished materials) outside MD land and M&L for plaster/screed bed in CM (1:4) 15 mm thick over RCC roof / brick wall mixed with water proofing compound @ 3% by weight of cement and preparing the surface to receive WPT treatment, applying a coat of oil based bitumen primer confirming to IS No. 3384 - 1986 @ 0.30 litrs/ Sqm and then laying APP modified mebrance 3mm thick with non woven polyester reinforcement membrane (3.50 Kg/Sqm) (centre core) by torch application method over primed surfaces and fixing Cement concrete tiles with grey cement and no pigment 25cm x 25cm x 22mm thick, machine pressed; set jointed and pointed in neat cement slurry floors, and cut and polished overfor 15mm thick cement mortar in CM 1:3 complete all as specified and directed by Engineer-in-charge. (Note :- WPC to be included in rate). |
| 142 | S & F in repairs 2nd class Hardwood Plain, bedding patti of cross section area n exc 6 Sqcm and fixed withs nails or glued for doors and kitchen cabinets shutters complete all as specified and directed. |
| 143 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement including taking down existing old/damaged SS railing complete all as specified and directed. |
| 144 | Material & Labour for servicing of Iron Security Slider gate of size 7.0m x 2.0m including following items (Excluding Electrical items):(i) Cleaning of slider path using Vaccum cleaner to remove dirt, leaves and stones from the bottom track(ii) Inspecting the metal components for corrosion and sanding down any rust spots and applying one coat of rust-resistant primer.(iii) Ensuring the alignment of the gate.(iv) Proper lubricating the wheels, bearings, Guide rollers, Rails etc using Silicon based lubricants or White lithium grease.(v) Identifying the worn out parts like Roller wheels,Guide rollers, Bearings etc and replacing the same. |
| 145 | S & F in repair for decorated PVC Jafri board 12mm thick fixed over wall, ceiling, wooden or particle or plywood with necessary cleaning of surface complete all as specified and directed.Note:- Jafri pattern as directed by GE. |
| 146 | S&F in repair for Providing precast cement concrete louvres and jallies, 25mm thick (measured solid), including all mouldings Type B0 1:2:4( 12.5mm graded aggregate) set in cement mortar 1:4 complete all as specified and directed. |
| 147 | M&L for Bees-wax polishing on surfaces of any description, width or girth including cleaning and preparing the surface complete all as specified and directed. |
| 148 | M&L for polishing of stainless steel balusters of 50mm dia and height n exc 1.00 m using chemical polishes like Brasso, Waxpol or Auotosol to restore desired degree of shine complete all as specified and directed. |
| 149 | M&L for polishing of stainless steel chain using Chemical polishes like Brasso, Waxpol or Auotosol to restore desired degree of shine complete all as specified and directed. |
| 150 | M & L for complete removal of existing treatment on old wall surfaces and applying two coats of oil bound distemper over 3mm thick wall care putty complete all as specified and directed. |
| 151 | M & L for one coat of White wash on ceiling including preparation of surfaces on old surfaces complete all as specified and directed. |
| 152 | M & L for one coat of oil bound distemper including preparation of surfaces on old surfaces of wall complete all as specified and directed. |
| 153 | M&L for preparing old surfaces including removal of black spots/water marks on wall and applying one coat of Acrylic Emulsion (weather coat) painting complete all as specified and directed.NOTE: (i) Work will be carried for bldgs of height 10 to 13 mtrs.(ii) Proper safety equipments to be provided to the workers involved in high rise bdlgs. |
| 154 | M & L for complete removal of existing treatment on old wall surfaces and applying two coats of plastic emulsion paint over 3mm thick wall care putty on walls complete all as specified and directed. |
| 155 | M&L preparation of old steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 156 | M&L for Finishing walls with textured paint of required shade by applying Two coats @ 3.28 ltr/10 sqm) over and including priming coat of applied @ 2.20kg/10 sqm over one coat of 3mm thick putty complete all as specified and directed. |
| 157 | S & F in repair for decorative type wall paper self adhesive, fixed over wall, ceiling, wooden or particle or plywood with necessary cleaning of surface complete all as specified and directed. Note:- Shade of wall paper as directed by GE. |
| 158 | M&L for Type B-2 1:2:4( 40 mm graded aggregate) Cement concrete in foundations, filling and mass concrete complete all as specified and directed. |
| 159 | S&F in repair toughened glass of thickness 8 mm as in shelves cut to shape reqiured with rounded edges fixed with chromium plated screws to walls including necessary fittings complete all as specified and directed by Engr-In-Charge. |
| 160 | S&F in repairs 15 mm size Long body pillar tap water screwed down for iron pipe and fixed cast copper alloy chromium plated with capstan head with all connected accessories fixed complete all as specified and directed. Make: Jaquar ALI-CHR-85021 or equivalent as per list of make / approved by GE |
| 161 | S&F in repair vitreous china counter top wash hand basin of size 705 mm x 460 mm x 195mm including all necessary fitting such as CP waste coupling 32mm dia, PVC waste pipe and brackets including supply and grouting 6 to 8 mm dia GI racket bolt at the back side of WHB and making good existing surfaces complete all as specified and as directed. Make : Jaguar Cat No. KUS-WHT-85601 or equivalent as per list of make / approved by GE Please Enable Macros to View BoQ information |
