|
| 1 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all asspecified and directed. |
| 2 | Dismantling posts or struts (wood, steel or R.C.C.) any section embedded in concrete, including taking out embedded portion and making good disturbed ground complete all as specified and directed. |
| 3 | Dismantling Stone slabs and tiles of any description, interlocking paver block laid and pointed in any mortar of any description or thickness in floors, aprons etc. complete all as specified and directed. |
| 4 | M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub-base to flooring & apron etc. complete all as specified and directed. |
| 5 | M & L for Sand filling (cushion) under floors or in foundations with clean river sand duly clear of residual, organic and deleterious materials spread evenly to uniform thickness laid over sub base layer including watering and consolidation complete all as specified and directed.(Note: No additional amount shall be paid for overlap). |
| 6 | S&F for Polythene film transparent, 150 micron thick, laid onsand layer complete all as specified and directed by Engr-in-Charge. |
| 7 | M&L for 200 mm thick PQC work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, as per design mix and laid in bays to required gradient & camber incl form work/ bull nosing, rounding of edges, curing etc. complete all as specified and directed. |
| 8 | M&L for Forming 20 mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’, for 200 mm thick slab complete all as specified and directed. |
| 9 | M & L for Forming Contraction (Dummy) joints 70mm deep x 10mm wide, filled with sealing compound complete all as specified and as directed. |
| 10 | M & L for Forming Contraction (Dummy) joints 30mm deep x 10mm wide, filled with sealing compound complete all as specified and as directed. |
| 11 | M&L for Finishing surface of concrete roads, pavements, by brooming complete all as specified and directed. |
| 12 | Supply & fixing in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and as directed. |
| 13 | Supply and fix in repairs solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed. |
| 14 | Supply and fixing in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all asspecified and directed. |
| 15 | Material & Labour for providing and fixing stainless steel (Grade 304) (in repairs ) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 16 | Supplying and fixing in repair retro reflective Overhead informatory road signage and boards, made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTMD- 4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). |
| 17 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed. |
| 18 | M&L For Plain Cement concrete Type C2 1:3:6 (40 mm graded aggregate) in foundation, filling and mass concrete complete all as specified and directed. |
| 19 | S&F in repairs circulate polycarbonate convex mirror 800 mm dia with mild steel pipe of adequate size for fixing of mirror incl embedding in PCC 1:3:6 Type C-1 (250X250X400 mm) complete all as per manufacturer's instructions including necessary excavation, stick retro-reflective tape both (Red & Yellow) complete all as specified and as directed. |
| 20 | S&F in repairs speed bumps, made of heavy duty tough rubber of size 500mmx 365 mm x 50 mm , black and yellow in color, Make Dark eye Model No 1008 or equivalent in 3M/STP Ltd. complete all as specified and as directed. |
| 21 | M&L For 75 mm thick, Plain Cement concrete Type D2 1:4:8 (40 mm graded aggregate) in sub base of flooring complete all as specified and directed. |
| 22 | M& L for Factory made, Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and no pigment complete all as specified and directed. Please Enable Macros to View BoQ information |
