|
| 1 | M&L for preparing old surfaces of walls plastered or un-plastered by brooming down with steel or wire brush and scraping down smoke soot, moulds moss & efflorescent salt and trading oil and greasy spots , washing rubbing down and stopping of distempered and painted surface & removing all vegetation growth, nails and making good holes,cracks etc complete by necessary putty and make the surface smooth by rubbing with sand papers etc and applying one coat of distemper oil emulsion on old prepared surfaces of walls complete all as specified and directed. |
| 2 | M&L for preparation of old decorated plastered or unplastered surfaces of ceiling, cornices etc and applying one coats of oil bound distemper complete all as specified and directed. |
| 3 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and directed. |
| 4 | M&L Rendering cement plaster 10mm thick in cement mortar 1:6 on other than fair faces of brick wall or on stone masonry surfaces, surface finished even and smooth without using extra cement, complete all as specified and directed. |
| 5 | M&L for applying of Birla/JK white wall putty approx 3 mm thick in two layer as per manufacturer's instruction including preparation surface and make the surface smooth by rubbing with sand papers etc complete all as specified and directed. |
| 6 | M&L for preparation of newly plastered surface on walls and applying two coats of oil bound distemper incl primer complete all as specified and directed. |
| 7 | M&L for complete removal of existing treatement by scraping, washing, rubbing down or stopping distempered or painted surfaces etc of walls plastered or un-plastered & removing all vegetation growth, cleaning and make the surface smooth by rubbing with sand papers etc and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed. |
| 8 | M&L for preparing of old painted wooden surfaces over 10cm width or girth and making good including knotting and stopping,cleaning etc complete by necessary putty and make the surface smooth by rubbing with sand papers etc and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 9 | M&L for preparing of old painted steel surfaces over 10cm width or girth and making good with & including by necessary red lead putty and make the surface smooth by rubbing with sand papers etc and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 10 | Demolition of cement concrete to ground floor(unreinforced) and paving n.exc 15cm thickness (below or above ground level) and removing rubbish of out side MOD land, complete all as specified and directed. |
| 11 | M&L for cement concrete 1:3:6 type C-2 (using 40mm graded aggregate) 75 mm thick for sub-base in sub floor sub base, floor and paving etc cement complete all as specifiied and directed. |
| 12 | M&L for PCC 25mm thick 1:2:4 type B1( using 12.5mm graded crushed stone aggregates )as in sub flooring , complete all specified and directed. |
| 13 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all specified and directed. |
| 14 | M&L coloured vitrified tiles light shade 9 to 10mm thick (square or rectangular ) of area exc. 0.18 sqm and not exc 0.36 sqm and laid in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement, complete all specified and directed. |
| 15 | Description all as per item No. 14.00 here in before but on vertical surfaces such as skirting incl rendering in cement mortar 1:3 rough finish to receive the tiles complete all as specified and directed. |
| 16 | M&L coloured/printed non skid ceramic tiles 7 to 8mm thick (squre/rectangular) area of each tile exc 0.11 but not exc 0.16 sqm laid in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement, complete all specified and directed. |
| 17 | M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of 350x 250x 7 mm/ 450X 350X 7mm/450x300x7mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 18 | M&L for 18-20mm thick granite stone (slab) of any colour/type, (table rubbed and polished) work as in floors/ vertical surfaces, cooking platforms and like, set in neat cement including pointing in white cement with admixture of pigment to match with shade of granite, complete laid over and including 15mm thick screed bed in cement mortor (1:6) laid and jointed with gray cement slurry mixed with pigment, including dismantling old existing stone slab complete all specified and directed. |
| 19 | M&L for Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations complete all as specified and as directed. |
| 20 | Demolition of stone/brick masonry built in cement mortar incl quoins, arches, etc but exceeding ashlar facing dressed stone Work etc complete all as specified and directed. |
| 21 | M&L for Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius in cement mortar 1:6, complete all as specified and directed. |
| 22 | M&L for Brick work with old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4, complete all as specified and directed. |
| 23 | M&L RCC (nominal mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like Type B1 1:2:4 (using 20 mm gradded aggregate) including demolition of cement concrete reinforced of any description in any position complete all specified and directed. |
| 24 | S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all specified and directed. |
| 25 | Form work to soffits of suspended slabs n exc 200mm thick (Horizontal or sloping) rough finished surfaces of concrete, complete all specified and directed. |
| 26 | Dismantling of wall/ ceiling boards (fibre, pulp, insulation etc) or insulation sheets/slabs/blankets any thickness including cover fillets complete all as specified and directed. |
| 27 | S&F 18 to 20 mm thick solid PVC Board for cupboard/cabinet shutters with one side 1 mm thick printed PVC sheet other side plain PVC sheet of approved pattern as per specification and drawing and incl necessary beading in matching colour, magnetic ball catcher, 1 brass 2 lever lock of 50 mm complete all as specified and directed. |
| 28 | S&F 18 to 20 mm thick solid PVC Board for cupboard/cabinet partitions/frame as per specification and drawing and necessary beading in matching colour complete all as specified and directed. |
| 29 | S&F 40 mm dia, brass, knobs for cupboard fixed with nut, screw and washer of mild steel, bright finised complete all as specified and directed. |
| 30 | S&F 75 mm, Extruded brass handles, fabricated type polishedbrass, for cupboard fixed with nut, screw and washer of mild steel, bright finised complete all as specified and directed. |
| 31 | S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap (when open) 30 mm complete all as specified and directed. |
| 32 | S&F for ball catcher for cupboard/cabinet etc complete all as specified and directed. |
| 33 | S&F in repairs Health Faucet CP with Rubbit Cleaning System , 1.25 m Long PVC Flexible Tube & ABS Wall Hook . Make : (Hindware :- Cat Part No - F160027) , ( Prayag : CAT Part No : BEA-40S ) or equivalent as approved by GE complete all as specified and directed. |
| 34 | S&F in repairs mild Steel 300mm, ordinary rat tail rod patttern springs including roller & roller plate complete fixed with screw or by welding complete all as specified and directed. |
| 35 | S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete. |
| 36 | Taking down chowkhat or frames with shutter not exceeding 1.5 Sqm each with shutter (without taking off shutters from the frames) and removing from site including making the disturbed portion , complete all specified and directed. |
| 37 | Description all as per srl item No. 36.00 here in before but size exceeding 1.5 Sqm and not exceeding 4.00 Sqm each complete all as specified and directed. |
| 38 | S&F Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing, complete all specified and directed. |
| 39 | S&F factory made solid PVC coloured moulded door shutters 28 to 30mm thick stiles), with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on back face, with wood free EPS, Supplying and fixing in frame at site as per specifiecation & drawing shown in section 8 of SSR part-II complete all as directed.Note : Colour approved by GE / Engr-in-Charge |
| 40 | S&F aluminum anodized, barrel tower bolts of extruded section, length of bolt 150 mm , complete all specified and directed. |
| 41 | S&F aluminum alloy handle of extruded section of size 125 mm, complete all specified and directed. |
| 42 | S&F 100mm Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all specified and directed. |
| 43 | S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp and stape ( bolt type ) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolt and sliding bolt of extruded section or cast aluminium alloy and fixed, complete all specified and directed. |
| 44 | M&L for 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane incluing Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old glazing pins/spring clips complete all as specified and directed. |
| 45 | M&L for 3mm thick sheet figured glass, pin headed type and glazing with oil putty in square n exc 0.5 Sqm in each pane including Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old glazing pins/spring clips complete all as specified and directed. |
| 46 | Taking up or down steel tubing of 15mm bore and connections including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 47 | S&F of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on wall/ceiling or laying in floors 16mm outer dia including all fittings like elbow, tees, sockets, union, nipple, adaptor etc complete all as specified and directed by Engr-in-charge. |
| 48 | Taking up or down steel tubing of 20mm bore and connections including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 49 | S&F of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on wall/ceiling or laying in floors 20mm outer dia including all fittings like elbow, tees, sockets, union, nipple, adaptor etc complete all as specified and directed by Engr-in-charge. |
| 50 | M&L for cutting chases, pinning in making good to facing where required and pointed in CM 1:3 to ends or edge of landing, steps cills, sunshade, shelves etc and cutting chases for concealed water tubing in stone concrete block or slab walls etc and making good cutting n exc 10 cm girth complete all as specified and directed |
| 51 | S&F 500 litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical double layered with closed top) duly provided with necessary fittings/ fixtures for connecting inlet, outlet, washout and overflow pipes; hoisted and fixed in position incl dismantling PVC water sotrage tanks of capacity more than 250 to 500 litres capacity complete all as specified and directed. |
| 52 | S&F 1000 litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical double layered with closed top) duly provided with necessary fittings/ fixtures for connecting inlet, outlet, washout and overflow pipes; hoisted and fixed in positionincl dismantling PVC water sotrage tanks of capacity more than 500 to 1000 litres capacity complete all as specified and directed. |
| 53 | S&F in repair PVC valveless syphonic action type low level flushing cistern 10ltr capacity white with all internal fittings and handles knob/push including brackets PVC connection 45cm long including nut and PVC washer at both ends with brass chromium plated coupling 32mm bore including 32mm bore PVC long bend flush pipe 90cm long complete all as specified and directed. |
| 54 | S&F in repair Vitreous China wash down water closet (pedestal pattern), White/coloured including traps, connection to drain or outgoing pipe, flushing pipe, anti-syphonage pipe complete including fittings, PVC coloured seat cover and chromium plated jet including PVC connection, fixed complete including demolition of old unservicable WC and provision of plain cement concrete M-15, type B-I, using 20mm graded crushed stone aggregate, fixed in repairs complete all as specified and directed. |
| 55 | S&F in repair Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580 mm x 440 mm, crystal white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of plain cement concrete M-15, type B-I using 20 mm graded crushed stone aggregate complete all as specified, incl making connections to trap and to flush pipe, etc and making good to floors to match existing, in repair, complete all as specified and directed. |
| 56 | S&F in repairs vitreous china, white wash hand basin, flat back size 550x400mm 'including MS brackets including cutting for and pinning in, including waste fitting , brass, chromium plated with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed, PVC connection and 15mm size with CP brass coupling nuts of length 450mm, trap, grating and union for discharge pipe, chain and plug and porcelain stoper and all accessories fixed in repair complete all as specified and directed. |
| 57 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 58 | S&F in repairs Corner Glass Shelf of Size 320 x 320 mm with Silver chromium finished border Oval Range premium quality all as specifed and directed by Engr-in-Charge . |
| 59 | S&F in repair 600 x 450 mm bevelled edges mirror 5 mm thick of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated screw and cup washers, complete all as specified and directed. |
| 60 | S&F in repair wall mixture for mixing (Hot and Cold) 15mm bore chromium plated cast copper alloy with capstan head screwed for iron pipe fixed complete all as specified and directed |
| 61 | S&F in repair sink mixture for mixing (Hot and Cold) 15mm bore chromium plated cast copper alloy with capstan head screwed for iron pipe fixed complete all as specified and directed. |
| 62 | S&F in repair Brass CP central hole wash basin mixer for hot & cold for 15mm dia complete fixed to connection complete all as specified and directed. |
| 63 | S&F in repair CP Bib tap, 15mm dia, cast copper alloy with crutch or butter fly handle screwed down, screwed for iron pipe or brass ferrule and fixed in repair all as specifiedscrewed for iron pipe or brass ferrule, complete all as specified and directed. |
| 64 | S&F in repair CP Stop valve/Angle valve 15mm bore cast copper alloy with crutch and butter fly handle screwed down high pressure,screwed both ends for pipe or for unions, complete all as specified and directed. |
| 65 | S&F in repair 15 mm bore PVC connection with PTMT of length 450 mm complete all as specified and directed. |
| 66 | S&F in repair CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed. |
| 67 | S&F in repair CP grating 125mm dia as suitable to existing trap as per requirement , complete all specified and directed. |
| 68 | S&F in repair PVC (SWR) floor trap of 75mm dia, plain with grating incl jointing with solvent cement complete all as specified and directed. |
| 69 | S&F in repair PVC (SWR) floor trap of 110mm dia, plain with grating incl jointing with solvent cement complete all as specified and directed. |
| 70 | S&F in repair PVC (SWR) bends any radius of 75mm bore, complete all as specified and directed. |
| 71 | S&F in repair PVC (SWR) bends any radius of 110mm bore, complete all as specified and directed. |
| 72 | S&F PVC (SWR) pipes single socketed,75mm bore, in any length with rubber ring joints fixed to wall and floor, complete all as specified and directed. |
| 73 | S&F PVC (SWR) pipes single socketed,110mm bore, in any length with rubber ring joints fixed to wall and floor, complete all as specified and directed. |
| 74 | S&F PVC SWR) 'T' junction 75mm dia complete all as specified and directed. |
| 75 | S&F PVC SWR) 'T' junction 110mm dia complete all as specified and directed. |
| 76 | S&F PVC (SWR) vent cowl 75mm dia complete all as specified and directed. Please Enable Macros to View BoQ information |
