|
| 1 | Taking down carefully un-serviceable/old rolling shutters of size exceeding 5 Sqm but n. exc 10 Sqm each, gear operative/pull or push type type for replacement of un-serviceable/defective parts, denting of various parts, cleaning of guide rails, laths, top cover by kerosene and proper greasing, oiling to make the system smooth/easy functional, repair to locking arrangements including supply and fix new nuts & bolts of existing size by removing old/rusted nut and bolts wherever required, necessary welding wereever required as directed, giving proper tension to the spring and refixing the shutter and gear box in the same opening after repair work carried out complete all as specified and as directed by the Engr-in-Charge. |
| 2 | All as per serial item NO 01 above but of size exc 10 Sqm n. exc 20 Sqm each. |
| 3 | All as per serial item No 01 above but of size exc 20 Sqm each. |
| 4 | Supply only in repair 530mm long helical wire spring ‘O’ gauge for electrical operated rolling shutter. |
| 5 | Supply only in repair 450mm long helical wire spring. |
| 6 | Supply only in repair 300mm long helical wire spring. |
| 7 | S & F in repair ball bearings of size 50mm (Inner Dia). |
| 8 | S & F in repair cast iron gear set for mechanically operated rolling shutters thickness of laths 1mm. |
| 9 | S&F in repairs 1.00mm thick M.S. sheet hood covers bent to shape to match with the existing bracket welded with angle iron 25 X 25 X 3 mm on both sides and painted with two coats of aluminium paint over one coat of red oxide primer. |
| 10 | S&F in repairs Steel rolling shutters 1 mm thick, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: but gear operated type with bevel gear box and crank handle complete all as specified and as directed. |
| 11 | Repairs to collapsible gates removal, replacement of wom out minor spare parts such as rivets, roller wheels, straightening of vertical channels and cleaning of rust including greasing for smooth functioning including applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 12 | Repairs to aluminium doors/windows by cleaning, greasing and easing for smooth functioning including replacement of unserviceable fittings for the following:- Note:Spare parts if required shall be measured and paid separately under respective items. |
| 13 | Doors of any size |
| 14 | Windows of any size |
| 15 | Supply only rubber beading suitable aluminium doors and windows. |
| 16 | Supply and fixed in repairs Double action floor spring hydraulically regulated made up to minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, govering pivot made of brass, other parts made of mild steel heavy duty for aluminium doors all as specified and directed. |
| 17 | S & F in repair mild steel mortice lock of size 100mm, 4 levers. |
| 18 | Supply only Butt hinges of size 100mm , extruded aluminium alloy with galvanised mild steel hinge pin, anodised , type B-21 |
| 19 | Hacking out old broken glass (any thickness, size, quality or description) from wooden /steel frames or stone , concrete or brick surrounds, glazed with putty or fixed with beads. |
| 20 | S&F 4.0 mm thick ordinary glass fixed in aluminium windows/door/partions |
| 21 | S & F in repair for Collapsible steel gates, top hung consisting of channel pickets, pivoted flat bars, top and bottom unners, brass handles etc, as specified erected in position and securing runners with holdfast and brackets complete all as specified and directed |
| 22 | Taking down Chowkhats or frames n exc 1.5 sq. m each |
| 23 | S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed by Engr-in-Charge |
| 24 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engr-in-Charge |
| 25 | Supply & fix stainless steel 100mm size of hinges butt hinges, medium weight complete all as specified and as directed by the Engr-in-Charge |
| 26 | S&F 150mm size extruded aluminium alloy handles, fabricated type. |
| 27 | S&F 150mm size aluminium, anodisedbarrel tower bolt of extruded section. |
| 28 | Dismantling of floor or wall tiling including cement mortar bedding but not backing and removing the rubbish off the premises |
| 29 | M&L for Non skid coloured ceramic tiles 7 to 8mm thick area of each tile exc 0.06sqm but n exc 0.11sqm in floors etc set and jointed in neat cement slurry and pointed in white cement to match, over and including 15mm thick screed bed in CM (1:4) laid over and including 25mm thick PCC (1:2;4) type B-1 using 20mm graded crushed stone aggregate,complete all as specified and directed |
| 30 | M&L for Glazed Ceramic coloured Tiles, 350X250X7mm/450X350X7mm thick in size, set on Vertical Surfaces such as Skirting, Dado, etc,over and including 10mm thick rendering in cement mortar 1:3 Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed. |
| 31 | M&L for Vitrified Ceramic tiles light shade 9-10 mm thick Colour (square/rectangular) polished, area of each tiles exc .18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including Screed Bed 15 mm thick in Cement Mortar (1:6) complete all as specified and as directed. |
| 32 | all as per above item No.29 but in CM(1:3) 10mm thick rendering on vertical surfaces all as per specified and directed. |
| 33 | Demolition of cement concrete (un-reinforced) Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-Charge. |
| 34 | M&L100 mm thick for PCC 1:2:4 type B2 (using 20mm graded stone aggregate) as in path/ hard standing finishing smooth without using extra cement complete all as specified. |
| 35 | M&L100 mm thick for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in path/ hard standing complete all as specified. |
| 36 | Forming contraction (Dummy) joints 65mm X 10mm wide, filled with sealing compound Gde 'B' for key scrubbing down with water etc. |
| 37 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed. |
| 38 | S&F mild steel work in tubular trusses/structures of square/round/ rectangular pipes, rafters, purlins including special shaped washer etc. complete using ERW or inductuin butt welded tubes confirming to IS-1161-1998 grade St-240 including notching, drilling, fitting, rivetting and or welding or connecting bolts and nuts, cleats, gusset plates etc complete all as specified and as directed. |
| 39 | S&F mild steel for wind ties for roof including securing bolts ,incuding cutting tops to shape as directed , drilling holes and similar works conforming to Fe-290 Gde E-165. |
| 40 | Dismantling of plain or corrugated Abestos cement sheeting , any gauge , thickness roofing covering . |
| 41 | S&F Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof coverimg/ cladding to wall, fixed with self tapping screws as specified. |
| 42 | S & F coloured galvalume ridges,corner piece,barge board,window flashing etc, 0.50 mm thick, fixed with self tapping screws in roofs , walls etc. |
| 43 | M & L for preparation of new or previously un treated steel and iron surfaces over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide or zinc chrome on steel and iron surfaces all as specified and directed. |
| 44 | S&F 6mm thick tinted glass as approved by GE, fixed to existing aluminium door/ windows including hacking out existing glass and provn of rubber beading. |
| 45 | S&F in repair Door closer Aluminium Die cast hydraulically regulated designation No 3, universal type, suitable type for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixedNo 3 universal type, suitable for door shutters up to 700mm in width and of weight not more than 35 kg and fixed all as specified |
| 46 | M&L for vaccum filled tinted double layered glass( soundproof glass) of 6 mm thick on inner side and clear flat glass on outer side with 8V(i.e. 8mm thick of vaccum space) in between two glass with necessary frame work, incl fixing to aluminium/upvc frame with necessary access holes, rubber beading, cleats etc complete. |
| 47 | Taking down Chowkats or frame exc 1.5Sqm and not exc. 4Sqm each with shutters (without taking off shutters from the frames), all as specified. |
| 48 | M&L for Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 49 | M&L for Anodised aluminium window and ventilator ,door shutters without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 50 | Supply & Fix aluminium anodised grill of approved shape with opening in grill 66mm x 80mm (diagonally) or nearest to + 5mm made out of standard aluminium moulded section of size 6mm x 7mm |
| 51 | Taking down cement or cement lime plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed. |
| 52 | M&L for rendering 15mm thick in cement sand mortar 1:4 on fair faces of brick work, PCC block masonry or concrete surfaces, mixed with water proofing compound and finished even and smooth without using extra cement as per manufacturer's instructions. Note:- (a) Supply only Integral water proofing compound will be measured and paid seperately (b) Height of building may vary from 3 m to 6 m. |
| 53 | Supply only integral water proofing compound. |
| 54 | M&L for 10mm thick cement plastering in cement mortar 1:6 on fair faces of stone work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.NOTE: Height of building may vary from 3 m to 6 m. |
| 55 | M&L for 5 mm thick cement plastering in cement mortar 1:3 on fair faces of ceiling surfaces finished even & smooth without using extra cement complete all as specified and directed.NOTE: Height of building may vary from 3 m to 6 m. |
| 56 | M&L for preparation of new or previously untreated concrete/plaster surfaces and applying two coats of exterior emulsion paint (in camouflage pattern) as approved by the GE over a coat of primer all as specified and directed by Engr-in-Charge. |
| 57 | M&L for preparing new plastered wall surfaces and applying two coats of distemper with distemper oil emulsion, white or tinted including one coat of Birla White Putty by finishing the surfaces even and smooth complete all as specified and directed by EIC. |
| 58 | M&L for Preparation of new untreated surfaces of ceiling and appying three coats of white wash complete all as specified. |
| 59 | M&L for Preparing old steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed. |
| 60 | Taking down existing water proofing treatment on RCC slab / beams with bitumen felt without damaging structure and removing the debris outside the MD land and M&L for plaster 15 mm thick on concrete surfaces in cement mortar 1:4 finished even and smooth using WPC @ 3% by weight of cement and preparing the surfaces to receive WPT treatment , applying a coat of bitumen primer confirming to IS - 3384-1986 @ 3% per sqm ,providing APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by torch application over primed surfaces all as specified and directed by Engr-In- Charge |
| 61 | Demolition of PCC block masonry built in cement mortar all as specified |
| 62 | M&L for providing precast cement concrete block masonry type C1 1:3:6 using 20mm graded stone aggregate with solid blocks, exc 10cm in width and setting in CM 1:6 complete |
| 63 | Dismantling wall and ceiling boards (fibre, pulp, Insulation, etc.) or Insulation boards /blankets/slabs, any description and any thickness including cover fillets, cornices, etc complete all as specified and directed by Engineer-in-Charge. |
| 64 | Supply & fix solid PVC wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed by Engineer-in-Charge. |
| 65 | Supply & fix 5 mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
