|
| 1 | Note:-S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing nailing,wedging, glueing, providing hinges,applying putty to level the surface, placing every part in-tact and polishing the disturbed portion & Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with sand emery paper, the Wooden furniture shall be french polished with high gloss finish shade as approved by Engineer In charge,after properly cleaned and smoothened the surface.Painting the steel disturbed portion & painting steel surface with two coats of synthetic enamel paint of existing shade with spray gun & apply red oxide primer where ever required after properly smoothening the surface with sand paper. Top shall be 18 mm thick pre-laminated particle board both side laminated, duly fixed with half round teak wood beading in matching shade with synthetic adhesive. All kind of work will be executed where the furniture exist in different user Units of GE Rangia including BSO's Furniture Yard at Rangia, and office hours only as directed by Engineer-in-Charge.(Note applicable for item Srl No-1.01 to 12.06). |
| 2 | Almirah large steel :FD-1031:- S & F of lock as per existing pattern and shape. Make-Harrison/Godrej/Link |
| 3 | S & F of CP handle as per existing. |
| 4 | Repair of steel portion with welding,grinding and applying putty to smooth the surface. |
| 5 | S & F of Leg as per existing. |
| 6 | Painting of Almirah large steel as per Note. |
| 7 | Locker bed side steel: FD-1029/257 S&F of hasp & staples as per existing pattern. |
| 8 | Repairs to Steel portion by welding/Grinding/applying putty to making surface smooth finish. |
| 9 | S & F of CP handle as per existing pattern. |
| 10 | S & F of Leg as per existing pattern. |
| 11 | Painting of Locker bed side steel as per above Note. |
| 12 | Table 900x900 mm steel FD-1009:- S & F of Top as per drg. |
| 13 | Repair of steel portion by welding, grinding etc. |
| 14 | Painting of Table 900x900 as per above note. |
| 15 | Table 900x600 mm steel with/without drawer FD-1008/1007:- S & F of Top as per drg. |
| 16 | Repair of steel portion by welding, grinding and applying putty etc. |
| 17 | S & F of lock for table drawer as per existing pattern. |
| 18 | Painting of Table 900x600 with/without dwr as per above note. |
| 19 | Table office clk steel FD-1004:- S & F of Top as per drg. |
| 20 | Repair of steel portion by removing denting, welding/ grinding and making surface smooth finish. |
| 21 | S & F of drawer lock as per existing pattern. |
| 22 | Painting of table office clk steel as per above Note. |
| 23 | Chair writing MAP FD/E6/MAP/12 :- S & F of seat as per drg. (Fabric shall be approved by GE) |
| 24 | S & F of back as per drg. (Fabric shall be approved by GE) |
| 25 | Repair of steel portion by removing denting, welding/grinding and making surface smooth finish. |
| 26 | Painting of Chair writing as per above Note. |
| 27 | Charpoy GI pipe plytop:- FD-220Taking out existing broken plywood from the charpoy by loosining the nut bolts with washer. S&F of new 12 mm thick BWR grade plywood fixed to Charpoy from with Nut, Bolts, Make of Plywood- Greenply/Century Ply/Archidply |
| 28 | S&F of flat iron of size 40 mmx5 mm, 900mm long, support the plywood on charpoy as specified and directed by Engineer Incharge |
| 29 | S&F of three way GI elbow as specified in drg and directed by Engineer in charge. |
| 30 | Taking out existing damage short rails, cutting and threading of rails for converting it into legs duly threaded as specified in drg and directed by Engineer In Charge. |
| 31 | Charpoy Iron pipe:- FD/MAP-II/01Taking out existing broken plywood from the charpoy by loosining the nut bolts with washer. S&F of new 12 mm thick BWR grade plywood fixed to Charpoy from with Nut, Bolts, Make of Plywood- Greenply/Century Ply/Archidply |
| 32 | Repairs to Steel portion by welding/Grinding/ applying putty to making surface smooth finish. |
| 33 | Painting of charpoy MS tubing with plytop as per above note |
| 34 | Sofa set 5 seater with cushion:- FD-281:-S & F of Leg as per drg. |
| 35 | S & F of Arm as per drg. |
| 36 | S & F of Wooden batten as per drg. |
| 37 | S & F of Bearer as per drg. |
| 38 | Taking out old pressed /torn old cushions from sofa set and Supply 40 density thick foam cushion of size 21”x22”x4” duly fixed with the GM fabric as approved by GE.(Make of Cushion-kurlon Gold line/ Sleepwell/). |
| 39 | Polishing of sofa set 5 seater as per above Note. |
| 40 | Chair writing :- FD-280S & F of Back rest as per drg. |
| 41 | S & F of Front leg as per drg. |
| 42 | S & F of Rear legs as per drg. |
| 43 | S & F of Rails including hole of canning as per drg. |
| 44 | S & F of Leg stiffner as per drg. |
| 45 | S & F of handle as per drg. |
| 46 | Polishing of Chair writing as per above Note. |
| 47 | Removing the existing unserviceable cane plastic from the chair and Recanning the chairs with plastic cane as existing size. |
| 48 | Chair dining :- FD-279S & F of Back rest as per drg. |
| 49 | S&F of Front leg as per drg. |
| 50 | S&F of Rear legs as per drg. |
| 51 | S&F of Rails including hole of canning as per drg. |
| 52 | S&F of Leg stiffner as per drg. |
| 53 | Polishing of Chair dining as per above Note. |
| 54 | Removing the existing unserviceable cane plastic from the chair and Re-canning the chairs with plastic cane as existing size. |
| 55 | Chair dining cushioned FD/E6/MAP/10 :-S & F of Seat of 75 mm thick foam cushion of 32 denisty with fabric on seat of 12 mm thick plywood. |
| 56 | S&F of veritical Strips |
| 57 | S&F of front legs |
| 58 | S&F of rear legs |
| 59 | S&F of stiffner |
| 60 | Poishing of chair as per above note. Please Enable Macros to View BoQ information |
