|
| 1 | Scrapping old painted surface including disposal of all scrapped materials.by mechanical means S.I.No 772 SOR 2022 |
| 2 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 (For Carted Earth) |
| 3 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405.G-II |
| 4 | Providing, laying, spreading and compacting Stone aggregates of specific sizes to Water Bound Macadam (WBM-G-III) specification incl spreading in uniform thickness, hand packing , rolling with three wheel 80-100kN static roller in stage to proper grade and camber , applying and brooming , crushable screening to fill up the interstices of coarse aggregate , watering and compacting tothe required density Grading 3 as per Technical Specification Clause 405. G-III |
| 5 | Providing and applying primer coat with bitumen emulsion (SS -1)on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg per sqm using mechanical means AS PER Technical Specification Clause 502 but excluding GST. |
| 6 | Providing and applying Tack coat with VG-10 using bitumen pressure distributor @ 0.25 to 0.30 kg. per Sqm. On the prepaired dry and hungry bituminous surface cleaned with Hydaulic broom as per Technical Specification Clause 503. |
| 7 | Providing,laying and rolling of open graded P.C. of 20mm thickness composed of 13.2mm to 5.6mm aggregates eigher using penetration grade bitumen or emulsion to required line grade and level to serve as wearing course on a previouslyprepared base i/c mixing in a suitable plant, laying and rolling with a three wheeld 80-100 kN static roller capacity, finished to required level and gredes to be followed by seal coat as per Technical Specification Clause 508 but excluding GST. |
| 8 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B as per Technical Specification Clause 510 but excluding GST. |
| 9 | Brick edging on both sides of the road of first class (M-150) brick on edge laid with mud mortar including labour and supply of bricks finished to the required templete and in proper alignment and also including dressing and ramming the excavated earth as directed by the Engineer-in-Charge.(S.I. No. 765).CH-20 |
| 10 | Construction of information piller in brick work with Black Granite stone(2x3) size with B/W in 1:4 in 1.40m.wide wall,23 to 35 cm thickness & 1.50m. Height above G.L. with plaster in 1:4 as per drawing attached I/C digging & painting of letters ,snowcem two coats & I/C all materials,Labour &T&P etc. Complete. |
| 11 | Providing and laying of Interlocking Concrete Block Pavements having thickness 80 mm as per drawing and Technical Specification Clause 1504. |
| 12 | E/W in excavtion in foundation or trenches in ordinory soil i/c lift up to 1.5m and lead up to 30m SI NO-251 |
| 13 | Concrete with 4cm. Guage Stone ballast fine sand of 2.20 F:M. and cement in proportion of 12:6:1 in foundation, Sub base and under floors including supply of all meterials, labour and T&P etc. required for proper completion of work.S.I.No 281(a)+New(Rate As per S.O.R.- Rampur Circle).(Rate sanction As Per S.E. Moradabad Letter No 613 /29-09-2025, Item No-02) |
| 14 | M-150 brick work in 1:4 (one cement and Four coarse sand of 1.25 F.M.mortar) in foundation and plinth including supply of all meterials, labour and T&P etc. required for proper completion of work. S.I. No. 305 CH-06 |
| 15 | 12 MM thick Plaster with one part of cement and four part of approved corse sand mortar 2.25 fm over brick work including supply of all marerial labour taxes T&P etc. Required for proper completion of the work S.I.no. 584 CH-13 |
| 16 | Cement Concrete with 2cm. guage approved stone grit coarse sand and cement in proportion of 4:2:1 including supply of all materials,labour and T&P etc. required for proper completion of work. S.I. No. 279A CH-05 |
| 17 | Providing laying and fixing of 600 mm dia NP-3 Class Spigot Hume pipe Please Enable Macros to View BoQ information |
