|
| 1 | Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3 |
| 2 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. |
| 3 | Brick masonry work in 1:4 ratio with cement mortar in foundation complete excluding pointing and plastering as per drawing and technical specifications Clauses 600, 1202 & 1203 |
| 4 | Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), including provision of contraction and expansion, construction joints, admixtures as approved, curing of concrete slabs for 14-days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 |
| 5 | Supplying, fitting and placingTMT bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202 |
| 6 | Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5(with 4km cartage) |
| 7 | Providing and Laying Reinforced Cement Concrete Pipe NP3 for culvert on first class bendding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection work, backfilling, concrete and masonry work in head wall and parapet clause 1100 (1200 mm Dia) |
| 8 | Pointing with cement mortar (1:3) on brick work as per drawing and technical spacification clause 613.3 and 1204 |
| 9 | Laying brick soling layer on prepared sub-grade with brick on end edging according to lines, graded and cross-section shown on the drawing filling joints with sand and earth, spreading 25 mm thick layer of earth over brick soling, watering and rolliing the same with three wheel road roller 80-100 kN as per Technical Specification Clause 412 |
| 10 | Supply & fixing of inagration stone granite polished size of 600x900x20 mm with including letters , painting, groveeing of letters and filling of letter with golden varnish and cartage in all respect at site etc completion of all work |
| 11 | Supply & Fixing of informatory sign board 90x120cm size & 3.00m long made wuth iron 40x40x5mm 18 Gauge MS sheet & braud with flat iron 35x5 including two coat painting with red oxide cartage up to stone complete with all labours material & T&P as per standard design & drawing Please Enable Macros to View BoQ information |
