|
| 1 | TUBEWELL DEVELOPMENT |
| 2 | Transportation, erection and dismantaling of 250 Psi Compressor. |
| 3 | Charges for development by 150 Psi Compressor per hour. |
| 4 | SITC OF PUMPING PLANT INCLUDING STARTER, CONTROL PANEL, CABLE COMPLETE IN ALL RESPECT WITH ALL REQUIRED MATERIAL, T&P LABOUR ETC. |
| 5 | 40 H.P |
| 6 | Safety wire |
| 7 | Lowering of Pumpset with necessary nut bolt and packing |
| 8 | Welding work, Pipe Line digging, D joint fitting and connect to Pipe Line. |
| 9 | Chemical and Bacterological test of water sample from departmently/Approved lab. |
| 10 | Concrete with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. and cement, in proportion of 12:6:1 in foundations and under floors, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. |
| 11 | First class Brick Work in 1:4 cement & Coarse sand 2.20 F.M. mortar in superstructure including supply of all materials, labour and T&P etc. ried for proper completion of the work. |
| 12 | 12 mm thick plaster with cement and Coar sand of 1.25 fineness modules in 1:4 over brick work imum thickness not to be less than 1cm. including upply of all materials, labour, tools & plants etc. quired for proper completion of the work |
| 13 | Painting roofs or other iron work in large areas ith one coat priming and one coat of approved (above one Sq. Metre) paint (British antesol or equivalent) including supply of all materials, labour, Tools & ts etc. required for proper completion of the k. Paint to be used should confirm the ISI no. 103-109 |
| 14 | Cement Concrete with 4 cm. gauge stone ballast, coarse sand and cement, in proportion of 8:4:1 under floors, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. |
| 15 | 5cm (2\\") thick 1:1.5:3 plain cement concrete floor with cement approved coarse sand and 2cm graded approved stone grit, laid in panels finished with 3mm. (1/8\\") floating coat of neat cement of cement finished with ite cement slurry, jointing and polishing complete, ing supply of all materials, labour and Tools and ants |
| 16 | Providing wall putty on new surface with approved quality material of Berger/ J.K./Birla or similar make 2 coats |
| 17 | Distempering (first coat) with oil bound distemper of approved brand and manufacture and of quired shade on undecorated wall surface to give an even shade over and including a priming coat with ment primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paint after oroughly brushing the surface free from mortar dropping nd other foreign matters and also including the urface even with plaster of Paris or approved synthetic ls and sand papered smooth including supply of ls, labour, Tools & plants etc. required for proper tion of the work. |
| 18 | M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing uired for proper completion of the work Same as in item 502 above but in M.S. Grills & Stair case railing |
| 19 | Providing and fixing 1mm thick MS Sheet garge door with frame of 40x40x6mm angle iron 3.15mm thick MS gusset plate at the junction and corners including supply and fixing of necessary fittings. Lock rail of 15\\" length of oxidised iron and including pintels hooks at the top and applying priming coat of red lead paint on all sides complete. |
| 20 | Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe ealed in the wall, complete with 14 SWG copper earth ty wire,GP Box , piano type switch & ceiling rose/ ten holder on 3 mm thick phenolic laminated ackelite sheet etc., complete in all respect, as directed ing matching colour wash. |
| 21 | Supply and Wiring of submains with two nos. of 2.5 sq. mm. PVC insulated 1100 V grade single core m onductor cable in existing steel conduit complete with supply of all material labour & T&P required for proper completion of the work as directed at ite by Engineer in charge. |
| 22 | S&F and making connection of 16A 2 pole 30mA ELCB/RCCB of Din Rail Mounting complete in all respect as per direction and satisfaction to the Engineer in charge |
| 23 | S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve |
| 24 | Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mm x 100mm x 50mm size with phenolic laminated kelite sheet cover 3mm thick fixed with brass machine screw and cup washer. |
| 25 | Wiring point for fan / fesh air fan (light duty exhaust fan) with 1.5 sq.mm. FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit concealed in the wall, complete with 14 SWG copper earth continuity wire,GP Box , piano type switch & ceiling rose on 3 mm thick phenolic laminated backelite sheet etc complete in all respect, including matching colour wash. |
| 26 | Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of two no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in allrespect. |
| 27 | Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10mm gap for tharmal expansion, single socketed pipes. 110mm diameter |
| 28 | Miscelleneous |
| 29 | Add 18% GST Please Enable Macros to View BoQ information |
