|
| 1 | Excavation in all kinds of Soils & Soft murum including boulders up to 0.6 m diameter (0.113cum) for COT / WW Bar & Flank Wall / Tail & Approach Channel and placing the excavated stuff neatly in dump area or for formation of service road / embankment as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile with all lead and lift. including 1 % Cess for labour welfare etc. complete . |
| 2 | Excavation in Hard Murum including boulders up to 0.6 m diameter (0.113 cum) for COT / WW Bar & Flank Wall / Tail & Approach Channel and placing the excavated stuff neatly in dump area or for formation of service road / embankment as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile with all lead and lift. including 1 % Cess for labour welfare etc. complete . |
| 3 | Providing and fixing in position TMT - FE -500 bar reinforcement of various diameters for RCC works as per detailed designs and drawing ,including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete as directed with all lead & lift including 1 % Cess For Labour Welfare etc complete. |
| 4 | Providing and laying in situ cement concrete of grade M-15 1:2:4 (40 MSA) , for flank wall & ww Bar, ( Up To GL ) , of trap / granite / gneiss / quartzite /graded metal for PCC wirth or without surface reinforceent / RCC Concreting with Concrete Mixer with shuttering and scaffolding including placing, compacting, curing including 1 % Cess on labour welfare excluding royalty of material, etc complete . |
| 5 | Providing and laying in situ cement concrete of grade M-15 1:2:4 (40 MSA) , for flank wall & ww Bar, ( Up To GL ) , of trap / granite / gneiss / quartzite /graded metal for PCC wirth or without surface reinforceent / RCC Concreting with Concrete Mixer with shuttering and scaffolding including placing, compacting, curing including 1 % Cess on labour welfare excluding royalty of material, etc complete . |
| 6 | Providing and laying in situ cement concrete of grade M-15 1:2:4 (20 MSA) , of trap / granite / gneiss / quartzite /graded metal for flank wall & ww Bar, For Sub & Super Structure, with Concrete Mixer including form work including placing, compacting, curing including 1 % Cess on labour welfare excluding royalty of material, etc. complete . |
| 7 | Guide Bund With Available Material |
| 8 | Out Flanked Portion With Available Material |
| 9 | Quarry Spalls Of Approved Trap Stone With B.P. |
| 10 | Providing and constructing 230 mm thick dry rubble stone pitching using stones and stone chips from approved source from borrow area including cost of all materials, labour, hand packing / wedging stone chips, finishing etc., complete with lead up to 50 m and all lifts. |
| 11 | Straight Needle K.T.Weir Gate-Manufacturing- Manufacturing with QAP & fabrication of KT weir needle gates - straight type size 2.15 x 0.5M- 94 Kg. weight as per relevant Indian Standards with all material, Mild steel confirming to IS 2062, Rubber seal confirming to IS 4623 & Welding electrodes AWS E6013 for general weld joints. It includes all materials, Labour charges, machinery charges, 1km lead charges of transportation, loading and unloading charges of Gate parts at Site, Inspection & Quality control charges, Sand blasting, Painting with one coat of Zinc rich primer on dry film to give total dry film thickness 70 +/- 5 microns and 2 coats of sloventless coal tar epoxy paint applied to give minimum dry film thickness of 150+/- 5 micron per coat as per IS 14177. |
| 12 | Providing and fixing information board of 1.2 x 0.75 m prepared on 16 gauge M.S. sheet with angle iron frame of size 35 X 35 X 3 mm with cross bracing of size 25 X 25 X 3 mm including painting with one coat of zinc chromate storing primer and two coats each of green / white back ground and back side grey store enameled bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows coated with non - peal able crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50X50X5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60 X 60 X 75 cm as directed by engineer-in-charge including 1 % Cess for labour welfare etc. complete . |
| 13 | Part A Total |
| 14 | Part B __ 1 % Insurance |
| 15 | GST Charges |
| 16 | Royalty Charges |
| 17 | 10 % Jilha Khanij On Royalty |
| 18 | Testing QC Charges |
| 19 | part B Total Please Enable Macros to View BoQ information |
