|
| 1 | Dl Pipe : Providing and Supplying lSl mark Centrifugally cat (Spun) Ductile lron Pipes of 100 mm and above all diameter for water works with socket & spigot ends confirming to lS BA2g I 2000 in the standard working lengths of 4.5, 5.5 & 6 m suitablefor classiflcation K-7 & K-9 suitable for push-on-joint (rubber gusket D jointing) wlth cement mortar lining inside the pipes with outside zinc and bittuminous coating i) 200 mm dia DI K7 |
| 2 | Pushing of M.S. pipes of following dia for road crossing and railway crossing by pushMthrough method in all types of strata by using hydraulic jack and drilling machine of required diameter of below M.S. casing pipes,lowering, laying , jointing of material, required welding machinery, tripod, shain -pulley block crain, blower, compressor, loading and unloading of machinery into the trench, etc.transportation and dewatering, etc complete,as directed by engineer-in-charge butexcluding the cost of M.S. pipes. |
| 3 | E/W in excavation (As per I.S. 3114/1965 For laying of different type and size of pipe so as to give one Mtr. Avarage cover over the socket of pipe with disposal of excavated earth within initial lead and as per specifaction and direction Engineer -in- Charge.1x 407 MX0 .50MX1.1 =223.85 M³ of 70%=156.69 M³ |
| 4 | E/W in excavation of cut off trenches as per design section all complete as per spection and direction of E/I. Vide item (2).=223.85 M³of 30% =67.15M³ |
| 5 | E/W in Backfilling the the trenches after laying different type of pipe all comp. as per building spection and direction of E/I.90% of item no 2)=201.46M³ |
| 6 | Supplying labours, tools, tackles, lubricant etc. for laying and lointing C.l.S/S $ton pipes (class l*A) in trenches supplying rubber gasket (Rubber gaskets confirming to l.S.S.- 5382- 1969) and making gasket joints including providing night guard, banier and red light to safe guard against accident, allcomplete (Pipe to be suppllied departmenatlly free of cost and laying of pipes is to be done as per I.S.S.3114-1985) as per deslgn, speclflcaUon and direction of E/Ii)200mm DI-K-7 Pipe |
| 7 | Providing, erecting, connecting double flanged short body pattern type manually operated Sluice Valve/Scour valve having body, disc and end cover in graded cast iron to IS 210 Gr. CF 200 generally conforming in BS 5155, Synthetic rubber faced ring secured on disc by retaining ring with stainless steel screw stub shaft of stainless steel riding in teflon bearings excluding C.C.foundation/ structural steel support confirming to IS 13095-1991,(DI Specials if required will be paid seperately) including laying & jointing etc. all complete. Sluice valves - PN -1.6(i)100mm dia SV |
| 8 | (ii)200mm dia SV |
| 9 | Providing and supplying Air Valves as per IS-14845-2000 and MJP’s standardspecifications double orifice type combined with isolating sluice valve, mounted in horizontal position and operated by wheel gearing, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unloading,transportation upto departmental store,excluding GST levied by GOI & GOM in all respect etc. complete. (i)200mm dia |
| 10 | Supplying labours, tools , tackles, for fixing sulice valve all comp. as per direction of E/I. (i)200mm dia AV |
| 11 | Detail Estimate for construction of full way Sulice Valve Chamber/ Air valve chamber of 75A designation birick masonary chamber 1.5mx1mx1.2m deep internal dimension having 250mm thickness in cement morter 1:6 including 12 mmcement plaster 1:4 with punning with R.C.C. Cover as per direction of Engineer in charge. |
| 12 | Supplying labours, tools , tackles, for fixing sulice valve all comp. as per direction of E/I. (i)100mm dia SV |
| 13 | (ii)200mm dia SV |
| 14 | Supplying tools, labours and cutting road for laying of pipes of different size and restoring the same as per specification and direction of E/I.i) Pucca road Cutting of road 70% of183.15m²=128.20m² |
| 15 | ii) WBM road Cutting of road10% of 183.15m²= 18.31 m² |
| 16 | ProvidingP.C.C M-150 Iin nominal mix at foundn, with approved quality of stone chips 20 mm to 6mm size graded and clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing(but excluding the cost of reniforcement , taxes and royalty all complete as per building specification and direction of E/I |
| 17 | Providing and supplying D.I. fittings with ISI mark Mechanical joint confirming to tables 12 to table 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM gaskets, Nuts, Bolts, Washers and Ductile iron follower glands. Fittings should be with internally Ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation and excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete. i) 100 mm dia |
| 18 | i) 200 mm dia |
| 19 | D.I. Socket and flanged fittings :-Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints confirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM tyton rings. Fittings should be with internally ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation & excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete(i) Double Socket Tee with Flange branch-PN-10 (200 x 100 mm dia) |
| 20 | Providing and supplying D.I. fittings with ISI mark Mechanical joint confirming to tables 12 to table 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM gaskets,Nuts, Bolts, Washers and Ductile iron follower glands. Fittings should be with internally Ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation and excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete.i) spigot flange 200mm |
| 21 | Supplying labours for laying & Jointing plain and C.l. specials as for A.C. pressure pipe in trenches as per l.S.S. specification and direction of E/ l. (A.C. pressure pipe, C.l. specials, C.l. joints with\\"O\\" rinq to be supplied departmetally free of cost). (i) 200 mm outer dia |
| 22 | D.I. Socket and flanged fittings :-Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints confirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM tyton rings. Fittings should be with internally ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation & excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete(i) Double socket bend 90 degree |
| 23 | (i) Double socket bend 45 degree |
| 24 | D.I. Socket and flanged fittings :-Providing and supplying D.I.fitting with ISI mark socket pushon joints or flanged jointsconfirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM tyton rings. Fittingsshould be with internally ordinary portland cement mortor linedand externally metallic zinc coating/zinc rich paint with finishinglayer of black bitumen coating including transportation &excluding all statutary duties and taxes such as GST levied byGol and GoM in all respect etc. complete(i) End Cap 100 mm dia |
| 25 | Reducing Socket Plain (Taking larger dimension) 100 mm |
| 26 | Supplying and fixing G.t. fittings of approved make (Conforming to l.S:-1879) all complete as per specification and direction of E/|.Reducing Socket 100mm dia. |
| 27 | Goods & Service Tax (G.S.T.) - |
| 28 | Labour Cess /Contingency Please Enable Macros to View BoQ information |
