|
| 1 | Providing and fixing Pressed steel door frames conforming to IS: 4351,manufactured from commercial mild steel sheet of 1.60 mm thickness, includinghinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mmthick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: |
| 2 | Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws. 40mm thick. 2nd class deodar wood. |
| 3 | Providing 40x3 mm flat iron hold fast 40cm. Long including fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm. 1:3:6 ( 1 cement : 3 sand: 6 graded stone aggregate 20mm nominal size) |
| 4 | Providing fixing bright finished aluminium tower bolts (barrel type) with screws etc. complete. 250x10 |
| 5 | Providing and fixing bright finished brass handles with screws etc. complete. 125mm (One hundred twenty five milimeter) |
| 6 | Providing and fixing 100mm bright finished mild steel floor door stopper with rubber cushion screws etc. to suit shutter thickness complete |
| 7 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
| 8 | Cera Make EWC One Piece LYS-WHT |
| 9 | wash basin of following types & sizesfor General / Private toilets :- |
| 10 | Providing & fixing under counter basin CNS-WHT-701 of size 480x370x200mm shape rectangular of reputed make within all lead & lift as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 11 | Proviiding & fixing wall mixing faucet for shower of repude make within all leads & lifts as per the directions and to the entire satisfaction of Engineer-in-Charge. |
| 12 | Proviiding & fixing shower of reputed make within all leads & lifts as per the directions and to the entire satisfaction of Engineer-in-Charge. |
| 13 | Poviding and fixing C.P. Stop cocks 15mm dia within all leads & lifts as per the directions and to the entire satisfaction of Engineer-in-Charge. |
| 14 | Poviding and fixing C.P. Swan neck pillar cock of reputed makewithin all leads & lifts as per the directions and to the entire satisfaction of Engineer-in-Charge. |
| 15 | Poviding and fixing of reputed make C.P. Stop cocks/Angle cocks 15mm dia (long nose) within all leads & lifts as per the directions and to the entire satisfaction of Engineer-in-Charge. |
| 16 | \\"Providing and fixing of reputed make C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore within all leads & lifts as per the directions and to the entire satisfaction of Engineer-in-Charge. |
| 17 | Providing and fixing of reputed make 15mm mixer for kitchen sink with top / bottom swinging spout within all leads & lifts as per the directions and to the entire satisfaction of Engineer-in-Charge. |
| 18 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required within all leads & lifts as per the directions and to the entire satisfaction of Engineer-in-Charge. |
| 19 | Providing and fixing Stainless steel Towel rail within all leads & lifts as per the directions and to the entire satisfaction of Engineer-in-Charge. |
| 20 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms within all leads & lifts as per the directions and to the entire satisfaction of Engineer-in-Charge. |
| 21 | Providing and fixing charomium plated soap dish with C.P.brass brackets fixed to wooden cleats with C.P. brass screws etc. complete within all leads & lifts as per the directions and to the entire satisfaction of Engineer-in-Charge |
| 22 | Providing and fixing Wall hanger within all leads & lifts as per the directions and to the entire satisfaction of Engineer-in-Charge. |
| 23 | Providing and fixing toilet paper holder C.P. Brass within all within all leads & lifts as per the directions and to the entire satisfaction of Engineer-in-Charge |
| 24 | providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete within all leads & lifts as per the direction and to the entire satisfaction of Engineer-in-Charge |
| 25 | Providing and fixing to wall, ceiling and floor, CPVC tubes tube fittings & clamps including making good the wall, ceiling and floor within all leads & lifts as per the directions and to the entire satisfaction of Engineer-in-Charge. |
| 26 | 20 mm dia. |
| 27 | 25 mm dia. |
| 28 | 32mm dia |
| 29 | Providing and fixing on wall face unplasticised Rigid PVCnrain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes within all leads & lifts as per the directions and to the entire satisfaction of Engineer-in-Charge. |
| 30 | 90 mm dia. |
| 31 | 110 mm dia. |
| 32 | Providing and placing on terrace polyethylene water storage tank, IS : 12701 marked,withcover and suitable locking arrangement and makingnecessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank within all leads & lifts as per the directions and to the entire satisfaction of Engineer-in-Charge. |
| 33 | Demolition above G.L. upto floor two level including disposal of unserviceable materials within 20 metres lead and including cutting the necessary reinforcement and separating from R.C.C./R.B. work. |
| 34 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead |
| 35 | Providing & Laying cement concrete 1:2:4 ( 1 cement : 2 sand : 4graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in foundation & plinth |
| 36 | P/F wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56mm for doors, windows and clerestory windows including bright finished black enamelled iron hinges with necessary screws :40mm thick 2nd class indian teak wood Please Enable Macros to View BoQ information |
