|
| 1 | Excavating in trenches, n.exc 1.5m wide and n.exc 1.5m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes etc. n.exc 10sqm on plan and n.exc 1.5m in depth and getting out in soft/ hard soil complete all as specified and directed. Note:- The Excavation by manual means will only be allowed in locations where existing cables, pipe lines etc crossing the line of excavation. The rate quoted shall be deemed to be inclusive of the same. |
| 2 | Returning filling in using excavated soil including spreading, levelling, watering and well ramming in layers n.exc 25cm complete all as specified and as directed. |
| 3 | Removal of surplus excavated soil to a distance n.exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed. |
| 4 | Boring holes under road pavement by bocky manually in any type of soil upto 200mm bore complete all as specified and as directed. |
| 5 | Supplying, laying, jointing, testing and commisioning of DI Pipe as per IS 8329/2000 ISI marked, class K-7 with inside cement mortar lining with spigot and socket ends laid in trenches including taking down old unserviceable pipe line complete all as specified and as directed at site for the following sizes :- Note:- Earth work excavation etc and Joints shall be measured and paid separetely |
| 6 | 80mm bore |
| 7 | 100mm bore |
| 8 | 150mm bore |
| 9 | Material and Labour for DI fittings/specials such as Tees, bends (any type, radius and angle) tapers any type, collars, tail pieces, caps and plugs of the following sizes confirming to IS: 9523 complete all as specified and as directed. |
| 10 | Up to 100 mm bore |
| 11 | 150 to 200mm bore |
| 12 | M & L for fixing in repair following sizes 3 pole power contactor any type of existing starter panel upto 20 HP complete all as specified and as directed. |
| 13 | Supply, fixing, jointing & testing Cast Iron Sluice Valve of sizes as under, ISI Marked, flanged ends drilled pressure rating PN-1.0, PD Short body, confirming to IS 14846 -2000, having stainless steel spindle with cast iron operation wheel at top including taking out unsv sluice valve complete all as specified and as directed. Note:- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item. |
| 14 | 80mm bore |
| 15 | 100mm bore |
| 16 | 150mm bore |
| 17 | Supply, fixing, jointing and testing of Cast iron Non Return valve without by pass arrangement, swing type, confirming to IS 5312, flanged ends pressure rating PN 1.0 complete including taking out unsv NRV complete all as specified and as directed.Note:- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item. |
| 18 | 80mm bore |
| 19 | 100mm bore |
| 20 | 150mm bore |
| 21 | Supplying & fixing gun metal gate valves with iron wheel head, screwed both ends for iron pipe, ISI Marked, as per IS: 778 of following sizes including taking out unserviceable gate valves complete all as specified and as directed. |
| 22 | 15mm bore |
| 23 | 20mm bore |
| 24 | 25mm bore |
| 25 | 40mm bore |
| 26 | 50mm bore |
| 27 | 80mm bore |
| 28 | Labour for cutting, welding of CI/ DI/ GI/ MS pipe in position for reducing to required length for insertion of new tees, branches, buterfly valve (wafer type) etc of upto 200mm bore complete all as specified and as directed. |
| 29 | M & L for fixing of water pressure gauge (0-5 Kg/cm square) 100mm dial size including boring, threading, welding in CI/ DI/ GI/ MS of any sizes and connected with suitable size of U type MS/ CP pipe with ON OFF cock all as specified and as directed |
| 30 | Supply and fixing in repair sprinkler irrgation system 360 degree, typically operate at pressures ranging from 30 to 50 PSI (pounds per square inch) designed to throw water 50-90 feet at a flow rate of 18-45 gallons per minute including all fitting required at site complete all as specified and as directed. |
| 31 | Supply and fixing UPVC pipe of size 50mm dia bore with all accessories including bends, elbow, socket and including taking down old unsv CPVC pipe complete all as specified and directed. |
| 32 | Material and labour for GI tubing 'medium grade' with all accessories including bends, elbow, socket and including taking down old unsv GI pipe complete all as specified and directed |
| 33 | 15mm bore |
| 34 | 20mm bore |
| 35 | 25mm bore |
| 36 | 40mm bore |
| 37 | 50mm bore |
| 38 | 80mm bore |
| 39 | Supply, installation and testing flanged ends strainer/dirt box of following sizes with stainless steel mesh suitable for cold water meter to avoid foreign material entering into meter and making good connection with flanged ends, with gasket rubber sheet and nut & bolts fixing in horizontal/inclined/ vertical position, including taking out unserviceable strainer/ dirt box complete all as specified and as directed. Note:- Flange joints including jointing materials shall deemed to be included in the unit rate of this item. |
| 40 | 50mm bore |
| 41 | 80mm bore |
| 42 | 100mm bore |
| 43 | 150mm bore Please Enable Macros to View BoQ information |
| 44 | 150mm bore Please Enable Macros to View BoQ information |
