Supply Of Wheel Chair With Arm (Patient Transfer) Type Of Portable R Foldingmaterial Of R Aluminium Entire Walking Surface Shall Be Covered With Anti-Skid Rubber Sheet Or Slip-Resistant Tapes Yes Maximum Load Capacity (In Kg) (Including A Wheelchair-Bihar
TDR : 55263526
Tender Notice
BOQ
5 Days Left
Bihar
Supply Of WHEEL CHAIR With Arm (Patient Transfer) Type of Portable R FoldingMaterial of R Aluminium Entire walking surface shall be covered with anti-skid rubber sheet or slip-resistant tapes Yes Maximum Load Capacity (In Kg) (Including a wheelchair
Rack for safety equipment with 5-shelf (S S Grade 304 Galvanized). [ Warranty Period: 30 Months after the date of delivery ] ]
2
WHEEL CHAIR With Arm (Patient Transfer) Type of Portable Ramp Folding Material of Ramp Al uminium Entire walking surface shall be covered with anti-skid rubber sheet or slip-resistant tapes Yes Maxi mum Load Capacity (In Kg) (Including a wheelchair along with the user) 50<=200 Specify Maximum Load C apacity 300 kilogram Weight of Ramp 20 kilogram Length of Ramp (In Feet) >=1<=2 Specify Length of mp 10 foot Inner Width (In feet) >=0.5<=1 Specify Inner Width 3 foot Safety Edges Safety Rails Mandatory Re quirements 1. Instruction Manual with guidelines for assembly, use, maintenance, and safety precautions p rovided, 2. Ramp Marked with Accessibility sign and Maximum Load Capacity [ Warranty Period: 30 Mont hs after the date of delivery ] ]
3
THREE SEATER CHAIR With ARM Parfo Chair Make- Jajodia or Similar Table top / Chair seat / b ench seat material Stainless steel Grade 304 galvanized Table top / Chair seat / bench seat thickness 0.6 m m Leg material for Table and Chair/bench Stainless steel Grade 202 galvanized Wall thickness of Leg mater al (for Table and Chair/bench) 0.8 mm Support material for Table and Chair/bench Stainless steel Grade 304 galvanized Backrest material for Chair/bench Stainless steel Grade 202 galvanized Table - Chair/bench atta ching material Stainless steel Grade 304 galvanized Product Configuration Provision for 8 - persons Mode of supply Knocked Down To Be Assembled At Consignee Site By The Seller Table Foot res Only two sides - alo ng the depth.Chair/bench back rest Without Support for Table top Widthwise support Number of support for Table top 2 no. Support for chair/bench seat Widthwise support Width of table 10 mm 1180 for 4-seater Cha ir/bench Leg size ? 2 mm 15 mm x 15 mm Size of support pipes/square sections (for table)25 mm x 25 mm Size of support pipes/square sections (for chair/bench)15 mm x 15 mm Warranty Period 1 - year [ Warrant y Period: 30 Months after the date of delivery ] ]
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
